[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170127200510.4444-3-krzk@kernel.org>
Date: Fri, 27 Jan 2017 22:05:08 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Marek Szyprowski <m.szyprowski@...sung.com>,
Kishon Vijay Abraham I <kishon@...com>,
Kukjin Kim <kgene@...nel.org>,
Krzysztof Kozlowski <krzk@...nel.org>,
Javier Martinez Canillas <javier@....samsung.com>,
Lee Jones <lee.jones@...aro.org>,
Sylwester Nawrocki <s.nawrocki@...sung.com>,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org
Subject: [PATCH 2/4] phy: exynos5: Remove duplicated defines of PHY register defines
Phy drivers access PMU region through regmap provided by exynos-pmu
driver. However there is no need to duplicate defines for PMU
registers. Instead just use whatever is defined in exynos-regs-pmu.h.
This reduces number of defines and allows removal of one header.
Suggested-by: Marek Szyprowski <m.szyprowski@...sung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@...nel.org>
---
drivers/phy/phy-exynos-dp-video.c | 1 +
drivers/phy/phy-exynos5-usbdrd.c | 1 +
include/linux/mfd/syscon/exynos5-pmu.h | 22 ----------------------
include/linux/soc/samsung/exynos-regs-pmu.h | 8 ++++++++
4 files changed, 10 insertions(+), 22 deletions(-)
diff --git a/drivers/phy/phy-exynos-dp-video.c b/drivers/phy/phy-exynos-dp-video.c
index 34b06154e5d9..d72193188980 100644
--- a/drivers/phy/phy-exynos-dp-video.c
+++ b/drivers/phy/phy-exynos-dp-video.c
@@ -20,6 +20,7 @@
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
+#include <linux/soc/samsung/exynos-regs-pmu.h>
struct exynos_dp_video_phy_drvdata {
u32 phy_ctrl_offset;
diff --git a/drivers/phy/phy-exynos5-usbdrd.c b/drivers/phy/phy-exynos5-usbdrd.c
index 07ed608905ac..7c896d0cda18 100644
--- a/drivers/phy/phy-exynos5-usbdrd.c
+++ b/drivers/phy/phy-exynos5-usbdrd.c
@@ -25,6 +25,7 @@
#include <linux/mfd/syscon/exynos5-pmu.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
+#include <linux/soc/samsung/exynos-regs-pmu.h>
/* Exynos USB PHY registers */
#define EXYNOS5_FSEL_9MHZ6 0x0
diff --git a/include/linux/mfd/syscon/exynos5-pmu.h b/include/linux/mfd/syscon/exynos5-pmu.h
index 02af8dece914..6108857ffcca 100644
--- a/include/linux/mfd/syscon/exynos5-pmu.h
+++ b/include/linux/mfd/syscon/exynos5-pmu.h
@@ -13,34 +13,12 @@
#define _LINUX_MFD_SYSCON_PMU_EXYNOS5_H_
/* Exynos5 PMU register definitions */
-#define EXYNOS5_HDMI_PHY_CONTROL (0x700)
-#define EXYNOS5_USBDRD_PHY_CONTROL (0x704)
/* Exynos5250 specific register definitions */
-#define EXYNOS5_USBHOST_PHY_CONTROL (0x708)
-#define EXYNOS5_EFNAND_PHY_CONTROL (0x70c)
-#define EXYNOS5_MIPI_PHY0_CONTROL (0x710)
-#define EXYNOS5_MIPI_PHY1_CONTROL (0x714)
-#define EXYNOS5_ADC_PHY_CONTROL (0x718)
-#define EXYNOS5_MTCADC_PHY_CONTROL (0x71c)
-#define EXYNOS5_DPTX_PHY_CONTROL (0x720)
-#define EXYNOS5_SATA_PHY_CONTROL (0x724)
/* Exynos5420 specific register definitions */
-#define EXYNOS5420_USBDRD1_PHY_CONTROL (0x708)
-#define EXYNOS5420_USBHOST_PHY_CONTROL (0x70c)
-#define EXYNOS5420_MIPI_PHY0_CONTROL (0x714)
-#define EXYNOS5420_MIPI_PHY1_CONTROL (0x718)
-#define EXYNOS5420_MIPI_PHY2_CONTROL (0x71c)
-#define EXYNOS5420_ADC_PHY_CONTROL (0x720)
-#define EXYNOS5420_MTCADC_PHY_CONTROL (0x724)
-#define EXYNOS5420_DPTX_PHY_CONTROL (0x728)
-
-/* Exynos5433 specific register definitions */
-#define EXYNOS5433_USBHOST30_PHY_CONTROL (0x728)
#define EXYNOS5_PHY_ENABLE BIT(0)
#define EXYNOS5_MIPI_PHY_S_RESETN BIT(1)
#define EXYNOS5_MIPI_PHY_M_RESETN BIT(2)
-
#endif /* _LINUX_MFD_SYSCON_PMU_EXYNOS5_H_ */
diff --git a/include/linux/soc/samsung/exynos-regs-pmu.h b/include/linux/soc/samsung/exynos-regs-pmu.h
index 637ead0efd36..d861e757bef8 100644
--- a/include/linux/soc/samsung/exynos-regs-pmu.h
+++ b/include/linux/soc/samsung/exynos-regs-pmu.h
@@ -349,6 +349,8 @@
#define EXYNOS5_AUTO_WDTRESET_DISABLE 0x0408
#define EXYNOS5_MASK_WDTRESET_REQUEST 0x040C
+#define EXYNOS5_USBDRD_PHY_CONTROL 0x0704
+#define EXYNOS5_DPTX_PHY_CONTROL 0x0720
#define EXYNOS5_USE_RETENTION BIT(4)
#define EXYNOS5_SYS_WDTRESET (1 << 20)
@@ -502,6 +504,11 @@
#define EXYNOS5420_KFC_CORE_RESET(_nr) \
((EXYNOS5420_KFC_CORE_RESET0 | EXYNOS5420_KFC_ETM_RESET0) << (_nr))
+#define EXYNOS5420_USBDRD1_PHY_CONTROL 0x0708
+#define EXYNOS5420_MIPI_PHY0_CONTROL 0x0714
+#define EXYNOS5420_MIPI_PHY1_CONTROL 0x0718
+#define EXYNOS5420_MIPI_PHY2_CONTROL 0x071C
+#define EXYNOS5420_DPTX_PHY_CONTROL 0x0728
#define EXYNOS5420_ARM_CORE2_SYS_PWR_REG 0x1020
#define EXYNOS5420_DIS_IRQ_ARM_CORE2_LOCAL_SYS_PWR_REG 0x1024
#define EXYNOS5420_DIS_IRQ_ARM_CORE2_CENTRAL_SYS_PWR_REG 0x1028
@@ -639,6 +646,7 @@
| EXYNOS5420_KFC_USE_STANDBY_WFI3)
/* For EXYNOS5433 */
+#define EXYNOS5433_USBHOST30_PHY_CONTROL (0x0728)
#define EXYNOS5433_PAD_RETENTION_AUD_OPTION (0x3028)
#define EXYNOS5433_PAD_RETENTION_MMC2_OPTION (0x30C8)
#define EXYNOS5433_PAD_RETENTION_TOP_OPTION (0x3108)
--
2.9.3
Powered by blists - more mailing lists