linux-kernel - Exynos5422 EHCI (USB 2.0) - Odroid XU4

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAJKOXPdFuixraNh_aZt9OMU5bEjtS81dz-mBLfWRBE6ejjeWaQ@mail.gmail.com>
Date:   Sun, 29 Jan 2017 15:35:37 +0200
From:   Krzysztof Kozlowski <krzk@...nel.org>
To:     Kamil Debski <kamil@...as.org>,
        Sylwester Nawrocki <s.nawrocki@...sung.com>,
        Kishon Vijay Abraham I <kishon@...com>,
        Felipe Balbi <felipe.balbi@...ux.intel.com>,
        Kukjin Kim <kgene@...nel.org>,
        Javier Martinez Canillas <javier@....samsung.com>,
        linux-usb@...r.kernel.org, linux-samsung-soc@...r.kernel.org,
        linux-kernel@...r.kernel.org, Felipe Balbi <balbi@...nel.org>,
        Richard Genoud <richard.genoud@...il.com>,
        Anand Moon <linux.amoon@...il.com>,
        Marek Szyprowski <m.szyprowski@...sung.com>,
        Markus Reichl <m.reichl@...etechno.de>
Subject: Exynos5422 EHCI (USB 2.0) - Odroid XU4 - port 1 resume error -110

Hi,

On Odroid XU4 with an external usb2514 hub (evaluation board from SMSC
or TI) connected to the USB2.0 port of EHCI controller, whenever I
plug some USB device into the usb2514 hub I see errors like:
[   73.969179] exynos-ehci 12110000.usb: port 1 resume error -110
[   74.003259] usb 1-1: USB disconnect, device number 2
[   74.017432] usb usb1-port1: cannot reset (err = -32)
[   74.021141] usb usb1-port1: cannot reset (err = -32)
[   74.026832] usb usb1-port1: cannot reset (err = -32)
[   74.030974] usb usb1-port1: cannot reset (err = -32)
[   74.036677] usb usb1-port1: cannot reset (err = -32)
[   74.041919] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
[   74.140923] usb usb1-port1: unable to enumerate USB device

Flooding the console. USB device does not work.

Tested:
1. next-20170125,
2. mainline v4.10-rc5-393-g53cd1ad1a68f,
3. Hardkernel vendor kernel 3.10

It does not look like an issue of usb2514 but rather a combination of
usb2514 + Exynos EHCI because:
1. Happens only when usb2514 hub is directly connected to the USB2.0
port of EHCI controller.
2. If usb2514 is connected through other hub (like to other ports on
the board) - everything works fine.
3. I tested two different usb2514 hubs - one from TI, second from
SMSC. Both behave the same.
4. I had the same issue on DWC3 controller (USB 3.0 port) and in that
case helped ENABLING bits DWC3_GUSB2PHYCFG_SUSPHY and
DWC3_GUSB3PIPECTL_SUSPHY which is I think equal to disabling the
snps,dis_u3_susphy_quirk quirks.

It seems that issue is strictly related to Exynos5422 USB 2.0 driver
(phy?) and this hub. The drivers involved:
 - drivers/phy/phy-exynos5250-usb2.c
 - drivers/phy/phy-samsung-usb2.c
 - drivers/usb/host/ehci-exynos.c

Any ideas?

Best regards,
Krzysztof