[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ce65d79a-3697-40f8-edd5-026c68588489@st.com>
Date: Mon, 30 Jan 2017 10:10:39 +0000
From: Patrice CHOTARD <patrice.chotard@...com>
To: Lee Jones <lee.jones@...aro.org>,
"gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>,
"jslaby@...e.com" <jslaby@...e.com>,
"linux-serial@...r.kernel.org" <linux-serial@...r.kernel.org>,
"dt@...nel.org" <dt@...nel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>
CC: "linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"kernel@...inux.com" <kernel@...inux.com>
Subject: Re: [PATCH v2 09/10] ARM: dts: STiH407-family: Use new Pinctrl groups
Hi Lee
On 01/27/2017 06:28 PM, Lee Jones wrote:
> Having just defined some new Pinctrl groups for when when HW flow-
double "when"
> control is {en,dis}abled, let's reference them for use within the
> driver.
>
> Signed-off-by: Lee Jones <lee.jones@...aro.org>
> ---
> arch/arm/boot/dts/stih407-family.dtsi | 3 +--
> arch/arm/boot/dts/stih410-b2260.dts | 5 ++++-
> 2 files changed, 5 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
> index c8b2944..e480e32 100644
> --- a/arch/arm/boot/dts/stih407-family.dtsi
> +++ b/arch/arm/boot/dts/stih407-family.dtsi
> @@ -222,9 +222,8 @@
> compatible = "st,asc";
> reg = <0x9830000 0x2c>;
> interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_serial0>;
> clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
> + /* Pinctrl moved out to a per-board configuration */
>
> status = "disabled";
> };
> diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
> index fa16aba..8deecf6 100644
> --- a/arch/arm/boot/dts/stih410-b2260.dts
> +++ b/arch/arm/boot/dts/stih410-b2260.dts
> @@ -62,8 +62,11 @@
> /* Low speed expansion connector */
> uart0: serial@...0000 {
> label = "LS-UART0";
> - status = "okay";
> + pinctrl-names = "default", "manual-rts";
> + pinctrl-0 = <&pinctrl_serial0_flowctrl>;
> + pinctrl-1 = <&pinctrl_serial0>;
> rts-gpios = <&pio17 3 GPIO_ACTIVE_LOW>;
> + status = "okay";
> };
>
> /* Low speed expansion connector */
>
Powered by blists - more mailing lists