linux-kernel - [PATCH 10/15] phy: qcom-ufs: Remove -always-on property

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 30 Jan 2017 17:19:42 +0530
From:   Kishon Vijay Abraham I <kishon@...com>
To:     <gregkh@...uxfoundation.org>
CC:     <kishon@...com>, <linux-kernel@...r.kernel.org>
Subject: [PATCH 10/15] phy: qcom-ufs: Remove -always-on property

From: Bjorn Andersson <bjorn.andersson@...aro.org>

The fact that a regulator is always-on is a property of the regulator,
not a specific consumer. Implementing this in the driver leads to a
system behaviour that is dependent on if the Qualcomm UFS PHY was ever
(partially) probed.

If the specific regulator should be always on in a particular device,
mark it so by specifying "regulator-always-on" in the regulator node.

Reviewed-by: Vivek Gautam <vivek.gautam@...eaurora.org>
Reviewed-by: Subhash Jadavani <subhashj@...eaurora.org>
Acked-by: Rob Herring <robh@...nel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@...com>
---
 Documentation/devicetree/bindings/ufs/ufs-qcom.txt |    1 -
 drivers/phy/phy-qcom-ufs-i.h                       |    1 -
 drivers/phy/phy-qcom-ufs.c                         |    5 +----
 3 files changed, 1 insertion(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/ufs/ufs-qcom.txt b/Documentation/devicetree/bindings/ufs/ufs-qcom.txt
index b6b5130..1f69ee1 100644
--- a/Documentation/devicetree/bindings/ufs/ufs-qcom.txt
+++ b/Documentation/devicetree/bindings/ufs/ufs-qcom.txt
@@ -29,7 +29,6 @@ Optional properties:
 - vdda-pll-max-microamp : specifies max. load that can be drawn from pll supply
 - vddp-ref-clk-supply   : phandle to UFS device ref_clk pad power supply
 - vddp-ref-clk-max-microamp : specifies max. load that can be drawn from this supply
-- vddp-ref-clk-always-on : specifies if this supply needs to be kept always on
 
 Example:
 
diff --git a/drivers/phy/phy-qcom-ufs-i.h b/drivers/phy/phy-qcom-ufs-i.h
index d505d98..13b02b7 100644
--- a/drivers/phy/phy-qcom-ufs-i.h
+++ b/drivers/phy/phy-qcom-ufs-i.h
@@ -77,7 +77,6 @@ struct ufs_qcom_phy_vreg {
 	int min_uV;
 	int max_uV;
 	bool enabled;
-	bool is_always_on;
 };
 
 struct ufs_qcom_phy {
diff --git a/drivers/phy/phy-qcom-ufs.c b/drivers/phy/phy-qcom-ufs.c
index bbd3171..c145fa6 100644
--- a/drivers/phy/phy-qcom-ufs.c
+++ b/drivers/phy/phy-qcom-ufs.c
@@ -242,9 +242,6 @@ static int ufs_qcom_phy_init_vreg(struct device *dev,
 			}
 			err = 0;
 		}
-		snprintf(prop_name, MAX_PROP_NAME, "%s-always-on", name);
-		vreg->is_always_on = of_property_read_bool(dev->of_node,
-							   prop_name);
 	}
 
 	if (!strcmp(name, "vdda-pll")) {
@@ -402,7 +399,7 @@ static int ufs_qcom_phy_disable_vreg(struct device *dev,
 {
 	int ret = 0;
 
-	if (!vreg || !vreg->enabled || vreg->is_always_on)
+	if (!vreg || !vreg->enabled)
 		goto out;
 
 	ret = regulator_disable(vreg->reg);
-- 
1.7.9.5