[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1485783126-6316-1-git-send-email-raviteja.garimella@broadcom.com>
Date: Mon, 30 Jan 2017 19:02:03 +0530
From: Raviteja Garimella <raviteja.garimella@...adcom.com>
To: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Kishon Vijay Abraham I <kishon@...com>,
Ray Jui <rjui@...adcom.com>,
Scott Branden <sbranden@...adcom.com>,
Jon Mason <jonmason@...adcom.com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
bcm-kernel-feedback-list@...adcom.com,
linux-arm-kernel@...ts.infradead.org
Subject: [PATCH v3 0/3] Support for USB DRD Phy driver for NS2
Changes from v2:
===============
Remove unnecessary checks for poweron as suggested in review.
<clip: as before>
Changes from v1:
===============
1. Initialize file operations .owner field with THIS_MODULE.
2. Remove unnecessary gpio example in DT bindings documentation.
This is previously acked by Rob Herring <robh@...nel.org>
Introduction:
This patch adds support for USB Dual Role Device Phy for Broadcom
Northstar2 SoC. Apart from the new phy driver, this patchset contains
changes to Kconfig, Makefile, and Device tree files.
This patchset is tested on Broadcom NS2 BCM958712K reference board.
Repo: https://github.com/Broadcom/arm64-linux.git
Branch: ns2_drdphy_v3
Raviteja Garimella (3):
Add DT bindings documentation for NS2 USB DRD phy
Broadcom USB DRD Phy driver for Northstar2
DT nodes for Broadcom Northstar2 USB DRD Phy
.../devicetree/bindings/phy/brcm,ns2-drd-phy.txt | 30 ++
arch/arm64/boot/dts/broadcom/ns2.dtsi | 14 +
drivers/phy/Kconfig | 13 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-bcm-ns2-usbdrd.c | 576 +++++++++++++++++++++
5 files changed, 634 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt
create mode 100644 drivers/phy/phy-bcm-ns2-usbdrd.c
--
2.1.0
Powered by blists - more mailing lists