linux-kernel - [PATCH v2 1/5] Documentation: dt: iio: document stm32 adc trigger polarity

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 30 Jan 2017 15:33:56 +0100
From:   Fabrice Gasnier <fabrice.gasnier@...com>
To:     <jic23@...nel.org>, <linux@...linux.org.uk>, <robh+dt@...nel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
CC:     <linux-iio@...r.kernel.org>, <mark.rutland@....com>,
        <mcoquelin.stm32@...il.com>, <alexandre.torgue@...com>,
        <lars@...afoo.de>, <knaack.h@....de>, <pmeerw@...erw.net>,
        <fabrice.gasnier@...com>, <benjamin.gaignard@...aro.org>,
        <benjamin.gaignard@...com>
Subject: [PATCH v2 1/5] Documentation: dt: iio: document stm32 adc trigger polarity

STM32 ADC trigger polarity can be set to either rising, falling
or both edges. Allow to configure it from dt.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@...com>
---
 Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
index 5dfc88e..6c6d968 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
@@ -57,6 +57,8 @@ Optional properties:
 - dmas: Phandle to dma channel for this ADC instance.
   See ../../dma/dma.txt for details.
 - dma-names: Must be "rx" when dmas property is being used.
+- st,trigger-polarity: Must be 0 (default), 1 or 2 to set default trigger
+  polarity to respectively "rising-edge", "falling-edge" or "both-edges".
 
 Example:
 	adc: adc@...12000 {
@@ -84,6 +86,7 @@ Example:
 			st,adc-channels = <8>;
 			dmas = <&dma2 0 0 0x400 0x0>;
 			dma-names = "rx";
+			st,trigger-polarity = <1>;
 		};
 		...
 		other adc child nodes follow...
-- 
1.9.1