[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170131100552.27949-6-mylene.josserand@free-electrons.com>
Date: Tue, 31 Jan 2017 11:05:49 +0100
From: Mylène Josserand
<mylene.josserand@...e-electrons.com>
To: lgirdwood@...il.com, broonie@...nel.org, robh+dt@...nel.org,
mark.rutland@....com, maxime.ripard@...e-electrons.com,
wens@...e.org, perex@...ex.cz, tiwai@...e.com
Cc: alsa-devel@...a-project.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
thomas.petazzoni@...e-electrons.com,
mylene.josserand@...e-electrons.com,
alexandre.belloni@...e-electrons.com
Subject: [PATCH v3 5/8] ASoC: codecs: Add sun8i-a33 binding documentation
Add the documentation for dt-binding of the digital audio codec driver
and the audio card driver for Sun8i-a33 SoCs.
Signed-off-by: Mylène Josserand <mylene.josserand@...e-electrons.com>
---
.../devicetree/bindings/sound/sun8i-a33-codec.txt | 75 ++++++++++++++++++++++
1 file changed, 75 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/sun8i-a33-codec.txt
diff --git a/Documentation/devicetree/bindings/sound/sun8i-a33-codec.txt b/Documentation/devicetree/bindings/sound/sun8i-a33-codec.txt
new file mode 100644
index 000000000000..2425c74bce7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/sun8i-a33-codec.txt
@@ -0,0 +1,75 @@
+Allwinner SUN8I audio codec
+------------------------------------
+
+On Sun8i-A33 SoCs, the audio is separated in different parts:
+ - A DAI driver. It uses the "sun4i-i2s" driver which is
+ documented here:
+ Documentation/devicetree/bindings/sound/sun4i-i2s.txt
+ - An analog part of the codec which is handled as PRCM registers.
+ See Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt
+ - An digital part of the codec which is documented in this current
+ binding documentation.
+ - And finally, an audio card which links all the above components.
+ The simple-audio card will be used.
+ See Documentation/devicetree/bindings/sound/simple-card.txt
+
+This bindings documentation exposes Sun8i codec (digital part).
+
+Required properties:
+- compatible: must be "allwinner,sun8i-a33-codec"
+- reg: must contain the registers location and length
+- interrupts: must contain the codec interrupt
+- clocks: a list of phandle + clock-specifer pairs, one for each entry
+ in clock-names.
+- clock-names: should contain followings:
+ - "bus": the parent APB clock for this controller
+ - "mod": the parent module clock
+
+Example:
+codec: codec@...22e00 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun8i-a33-codec";
+ reg = <0x01c22e00 0x400>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+ clock-names = "bus", "mod";
+ status = "disabled";
+};
+
+Here is an example to add a sound card and the codec binding on sun8i SoCs that
+are similar to A33 using simple-card:
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "sun8i-a33-audio";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,frame-master = <&link_codec>;
+ simple-audio-card,bitclock-master = <&link_codec>;
+ simple-audio-card,mclk-fs = <512>;
+ simple-audio-card,aux-devs = <&codec_analog>;
+ simple-audio-card,routing =
+ "Left DAC", "Digital Left DAC",
+ "Right DAC", "Digital Right DAC";
+
+ simple-audio-card,cpu {
+ sound-dai = <&dai>;
+ };
+
+ link_codec: simple-audio-card,codec {
+ sound-dai = <&codec>;
+ };
+
+ soc@...00000 {
+ [...]
+
+ codec: codec@...22e00 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun8i-a33-codec";
+ reg = <0x01c22e00 0x400>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+ clock-names = "bus", "mod";
+ status = "disabled";
+ };
+ };
+
--
2.11.0
Powered by blists - more mailing lists