| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1485954596-11014-4-git-send-email-gabriel.fernandez@st.com>
Date: Wed, 1 Feb 2017 14:09:56 +0100
From: <gabriel.fernandez@...com>
To: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Russell King <linux@...linux.org.uk>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...eaurora.org>,
Nicolas Pitre <nico@...aro.org>, Arnd Bergmann <arnd@...db.de>,
<daniel.thompson@...aro.org>, <andrea.merello@...il.com>,
<radoslaw.pietrzyk@...il.com>, Lee Jones <lee.jones@...aro.org>
CC: <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <linux-clk@...r.kernel.org>,
<gabriel.fernandez@...com>, <ludovic.barre@...com>,
<olivier.bideau@...com>, <amelie.delaunay@...com>
Subject: [Resend PATCH v2 3/3] ARM: dts: stm32: Use clock DT binding definition on stm32f429 family
From: Gabriel Fernandez <gabriel.fernandez@...com>
This patch uses clock DT binding definition instead numerical values
for stm32f429 board.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@...com>
---
arch/arm/boot/dts/stm32429i-eval.dts | 2 +-
arch/arm/boot/dts/stm32f429.dtsi | 66 +++++++++++++++++++-----------------
2 files changed, 36 insertions(+), 32 deletions(-)
diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index 76f7206..4e31881 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -107,7 +107,7 @@
usbotg_hs_phy: usbphy {
#phy-cells = <0>;
compatible = "usb-nop-xceiv";
- clocks = <&rcc 0 30>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(OTGHSULPI)>;
clock-names = "main_clk";
};
};
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index 041e3fc..1bacdfb 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -49,6 +49,7 @@
#include "armv7-m.dtsi"
#include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
#include <dt-bindings/clock/stm32fx-clock.h>
+#include <dt-bindings/mfd/stm32f4-rcc.h>
/ {
clocks {
@@ -82,7 +83,7 @@
compatible = "st,stm32-timer";
reg = <0x40000000 0x400>;
interrupts = <28>;
- clocks = <&rcc 0 128>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM2)>;
status = "disabled";
};
@@ -90,7 +91,7 @@
compatible = "st,stm32-timer";
reg = <0x40000400 0x400>;
interrupts = <29>;
- clocks = <&rcc 0 129>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM3)>;
status = "disabled";
};
@@ -98,7 +99,7 @@
compatible = "st,stm32-timer";
reg = <0x40000800 0x400>;
interrupts = <30>;
- clocks = <&rcc 0 130>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM4)>;
status = "disabled";
};
@@ -106,14 +107,14 @@
compatible = "st,stm32-timer";
reg = <0x40000c00 0x400>;
interrupts = <50>;
- clocks = <&rcc 0 131>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM5)>;
};
timer6: timer@...01000 {
compatible = "st,stm32-timer";
reg = <0x40001000 0x400>;
interrupts = <54>;
- clocks = <&rcc 0 132>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM6)>;
status = "disabled";
};
@@ -121,7 +122,7 @@
compatible = "st,stm32-timer";
reg = <0x40001400 0x400>;
interrupts = <55>;
- clocks = <&rcc 0 133>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM7)>;
status = "disabled";
};
@@ -129,7 +130,7 @@
compatible = "st,stm32-usart", "st,stm32-uart";
reg = <0x40004400 0x400>;
interrupts = <38>;
- clocks = <&rcc 0 145>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART2)>;
status = "disabled";
};
@@ -137,7 +138,7 @@
compatible = "st,stm32-usart", "st,stm32-uart";
reg = <0x40004800 0x400>;
interrupts = <39>;
- clocks = <&rcc 0 146>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART3)>;
status = "disabled";
dmas = <&dma1 1 4 0x400 0x0>,
<&dma1 3 4 0x400 0x0>;
@@ -148,7 +149,7 @@
compatible = "st,stm32-uart";
reg = <0x40004c00 0x400>;
interrupts = <52>;
- clocks = <&rcc 0 147>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART4)>;
status = "disabled";
};
@@ -156,7 +157,7 @@
compatible = "st,stm32-uart";
reg = <0x40005000 0x400>;
interrupts = <53>;
- clocks = <&rcc 0 148>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART5)>;
status = "disabled";
};
@@ -164,7 +165,7 @@
compatible = "st,stm32-usart", "st,stm32-uart";
reg = <0x40007800 0x400>;
interrupts = <82>;
- clocks = <&rcc 0 158>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART7)>;
status = "disabled";
};
@@ -172,7 +173,7 @@
compatible = "st,stm32-usart", "st,stm32-uart";
reg = <0x40007c00 0x400>;
interrupts = <83>;
- clocks = <&rcc 0 159>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART8)>;
status = "disabled";
};
@@ -180,7 +181,7 @@
compatible = "st,stm32-usart", "st,stm32-uart";
reg = <0x40011000 0x400>;
interrupts = <37>;
- clocks = <&rcc 0 164>;
+ clocks = <&rcc 0 STM32F4_APB2_CLOCK(USART1)>;
status = "disabled";
dmas = <&dma2 2 4 0x400 0x0>,
<&dma2 7 4 0x400 0x0>;
@@ -191,7 +192,7 @@
compatible = "st,stm32-usart", "st,stm32-uart";
reg = <0x40011400 0x400>;
interrupts = <71>;
- clocks = <&rcc 0 165>;
+ clocks = <&rcc 0 STM32F4_APB2_CLOCK(USART6)>;
status = "disabled";
};
@@ -226,7 +227,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x0 0x400>;
- clocks = <&rcc 0 0>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>;
st,bank-name = "GPIOA";
};
@@ -234,7 +235,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x400 0x400>;
- clocks = <&rcc 0 1>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOB)>;
st,bank-name = "GPIOB";
};
@@ -242,7 +243,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x800 0x400>;
- clocks = <&rcc 0 2>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOC)>;
st,bank-name = "GPIOC";
};
@@ -250,7 +251,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0xc00 0x400>;
- clocks = <&rcc 0 3>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOD)>;
st,bank-name = "GPIOD";
};
@@ -258,7 +259,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x1000 0x400>;
- clocks = <&rcc 0 4>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOE)>;
st,bank-name = "GPIOE";
};
@@ -266,7 +267,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x1400 0x400>;
- clocks = <&rcc 0 5>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOF)>;
st,bank-name = "GPIOF";
};
@@ -274,7 +275,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x1800 0x400>;
- clocks = <&rcc 0 6>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOG)>;
st,bank-name = "GPIOG";
};
@@ -282,7 +283,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x1c00 0x400>;
- clocks = <&rcc 0 7>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOH)>;
st,bank-name = "GPIOH";
};
@@ -290,7 +291,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x2000 0x400>;
- clocks = <&rcc 0 8>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOI)>;
st,bank-name = "GPIOI";
};
@@ -298,7 +299,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x2400 0x400>;
- clocks = <&rcc 0 9>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOJ)>;
st,bank-name = "GPIOJ";
};
@@ -306,7 +307,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x2800 0x400>;
- clocks = <&rcc 0 10>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOK)>;
st,bank-name = "GPIOK";
};
@@ -384,7 +385,7 @@
<16>,
<17>,
<47>;
- clocks = <&rcc 0 21>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(DMA1)>;
#dma-cells = <4>;
};
@@ -399,7 +400,7 @@
<68>,
<69>,
<70>;
- clocks = <&rcc 0 22>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(DMA2)>;
#dma-cells = <4>;
st,mem2mem;
};
@@ -411,7 +412,9 @@
interrupts = <61>;
interrupt-names = "macirq";
clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
- clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(ETHMAC)>,
+ <&rcc 0 STM32F4_AHB1_CLOCK(ETHMACTX)>,
+ <&rcc 0 STM32F4_AHB1_CLOCK(ETHMACRX)>;
st,syscon = <&syscfg 0x4>;
snps,pbl = <8>;
snps,mixed-burst;
@@ -422,7 +425,7 @@
compatible = "snps,dwc2";
reg = <0x40040000 0x40000>;
interrupts = <77>;
- clocks = <&rcc 0 29>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(OTGHS)>;
clock-names = "otg";
status = "disabled";
};
@@ -431,12 +434,13 @@
compatible = "st,stm32-rng";
reg = <0x50060800 0x400>;
interrupts = <80>;
- clocks = <&rcc 0 38>;
+ clocks = <&rcc 0 STM32F4_AHB2_CLOCK(RNG)>;
+
};
};
};
&systick {
- clocks = <&rcc 1 0>;
+ clocks = <&rcc 1 SYSTICK>;
status = "okay";
};
--
1.9.1
Powered by blists - more mailing lists