linux-kernel - [PATCH v4 07/10] ARM: dts: STiH410-b2260: Identify the UART RTS line

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20170203102319.23489-8-lee.jones@linaro.org>
Date:   Fri,  3 Feb 2017 10:23:16 +0000
From:   Lee Jones <lee.jones@...aro.org>
To:     gregkh@...uxfoundation.org, jslaby@...e.com,
        linux-serial@...r.kernel.org, devicetree@...r.kernel.org
Cc:     linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        kernel@...inux.com, patrice.chotard@...com,
        Lee Jones <lee.jones@...aro.org>
Subject: [PATCH v4 07/10] ARM: dts: STiH410-b2260: Identify the UART RTS line

When hardware flow-control is disabled, manual toggling of the UART's
reset line (RTS) using userland applications (e.g. stty) is not
possible, since the ASC IP does not provide this functionality in the
same was as some other IPs do.  Thus, we have to do this manually.
This patch configures the UART RTS line as a GPIO for manipulation
within the UART driver when HW flow-control is not enabled.

Acked-by: Peter Griffin <peter.griffin@...aro.org>
Signed-off-by: Lee Jones <lee.jones@...aro.org>
---
 arch/arm/boot/dts/stih410-b2260.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
index 06b0696..fa16aba 100644
--- a/arch/arm/boot/dts/stih410-b2260.dts
+++ b/arch/arm/boot/dts/stih410-b2260.dts
@@ -63,6 +63,7 @@
 		uart0: serial@...0000 {
 			label = "LS-UART0";
 			status = "okay";
+			rts-gpios = <&pio17 3 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Low speed expansion connector */
-- 
2.9.3