linux-kernel - Re: [PATCH v2 6/6] dt-bindings: mt8173-mtu3: add reference clock

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <1486447434.3750.20.camel@mhfsdcap03>
Date:   Tue, 7 Feb 2017 14:03:54 +0800
From:   Chunfeng Yun <chunfeng.yun@...iatek.com>
To:     Mathias Nyman <mathias.nyman@...el.com>
CC:     Felipe Balbi <felipe.balbi@...ux.intel.com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Matthias Brugger <matthias.bgg@...il.com>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        "Ian Campbell" <ijc+devicetree@...lion.org.uk>,
        <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-usb@...r.kernel.org>, <linux-mediatek@...ts.infradead.org>,
        <devicetree@...r.kernel.org>
Subject: Re: [PATCH v2 6/6] dt-bindings: mt8173-mtu3: add reference clock

Please ignore this series of patches, due to the first version have been
merged into usb-next branch except DTS's one[PACH 4/6].
This will cause mtu3 probe failure, so I will send new patches based on
usb-next branch.

sorry

On Mon, 2017-02-06 at 17:29 +0800, Chunfeng Yun wrote:
> Due to the reference clock comes from 26M oscillator directly
> on mt8173, and it is a fixed-clock in DTS which always turned
> on, we ignore it before. But on some platforms, it comes
> from PLL, and need be controlled, so here add it, no matter
> it is a fixed-clock or not.
> 
> Signed-off-by: Chunfeng Yun <chunfeng.yun@...iatek.com>
> ---
>  .../devicetree/bindings/usb/mt8173-mtu3.txt        |   10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/usb/mt8173-mtu3.txt b/Documentation/devicetree/bindings/usb/mt8173-mtu3.txt
> index e049d19..8c976cd 100644
> --- a/Documentation/devicetree/bindings/usb/mt8173-mtu3.txt
> +++ b/Documentation/devicetree/bindings/usb/mt8173-mtu3.txt
> @@ -10,7 +10,7 @@ Required properties:
>   - vusb33-supply : regulator of USB avdd3.3v
>   - clocks : a list of phandle + clock-specifier pairs, one for each
>  	entry in clock-names
> - - clock-names : must contain "sys_ck" for clock of controller;
> + - clock-names : must contain "sys_ck" and "ref_ck" for clock of controller;
>  	"wakeup_deb_p0" and "wakeup_deb_p1" are optional, they are
>  	depends on "mediatek,enable-wakeup"
>   - phys : a list of phandle + phy specifier pairs
> @@ -56,10 +56,10 @@ ssusb: usb@...71000 {
>  	phys = <&phy_port0 PHY_TYPE_USB3>,
>  	       <&phy_port1 PHY_TYPE_USB2>;
>  	power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
> -	clocks = <&topckgen CLK_TOP_USB30_SEL>,
> +	clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>,
>  		 <&pericfg CLK_PERI_USB0>,
>  		 <&pericfg CLK_PERI_USB1>;
> -	clock-names = "sys_ck",
> +	clock-names = "sys_ck", "ref_ck",
>  		      "wakeup_deb_p0",
>  		      "wakeup_deb_p1";
>  	vusb33-supply = <&mt6397_vusb_reg>;
> @@ -79,8 +79,8 @@ ssusb: usb@...71000 {
>  		reg-names = "mac";
>  		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
>  		power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
> -		clocks = <&topckgen CLK_TOP_USB30_SEL>;
> -		clock-names = "sys_ck";
> +		clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
> +		clock-names = "sys_ck", "ref_ck";
>  		vusb33-supply = <&mt6397_vusb_reg>;
>  		status = "disabled";
>  	};