[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <6c4741c2cf30693bd204ac71d76bae2734eeead1.1486592471.git.rask@formelder.dk>
Date: Thu, 9 Feb 2017 00:31:05 +0100 (CET)
From: Rask Ingemann Lambertsen <rask@...melder.dk>
To: Chen-Yu Tsai <wens@...e.org>,
Maxime Ripard <maxime.ripard@...e-electrons.com>,
Lee Jones <lee.jones@...aro.org>,
Mark Brown <broonie@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Liam Girdwood <lgirdwood@...il.com>
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v2 2/5] dts: mfd: axp20x: Add binding for the AXP808
The AXP808 does not support address space extension, but is otherwise
identical to the AXP806, including the chip ID, so add a compatible
string for it to the binding.
Signed-off-by: Rask Ingemann Lambertsen <rask@...melder.dk>
Acked-by: Rob Herring <robh@...nel.org>
Acked-by: Chen-Yu Tsai <wens@...e.org>
---
No changes in v2.
Documentation/devicetree/bindings/mfd/axp20x.txt | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt
index 86ae540..8195b06 100644
--- a/Documentation/devicetree/bindings/mfd/axp20x.txt
+++ b/Documentation/devicetree/bindings/mfd/axp20x.txt
@@ -7,12 +7,13 @@ axp209 (X-Powers)
axp221 (X-Powers)
axp223 (X-Powers)
axp806 (X-Powers)
+axp808 (X-Powers)
axp809 (X-Powers)
Required properties:
- compatible: "x-powers,axp152", "x-powers,axp202", "x-powers,axp209",
"x-powers,axp221", "x-powers,axp223", "x-powers,axp806",
- "x-powers,axp809"
+ "x-powers,axp808", "x-powers,axp809"
- reg: The I2C slave address or RSB hardware address for the AXP chip
- interrupt-parent: The parent interrupt controller
- interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin
@@ -87,7 +88,7 @@ LDO_IO1 : LDO : ips-supply : GPIO 1
RTC_LDO : LDO : ips-supply : always on
DRIVEVBUS : Enable output : drivevbus-supply : external regulator
-AXP806 regulators, type, and corresponding input supply names:
+AXP806/AXP808 regulators, type, and corresponding input supply names:
Regulator Type Supply Name Notes
--------- ---- ----------- -----
@@ -108,7 +109,7 @@ CLDO2 : LDO : cldoin-supply : shared supply
CLDO3 : LDO : cldoin-supply : shared supply
SW : On/Off Switch : swin-supply
-Additionally, the AXP806 DC-DC regulators support poly-phase arrangements
+Additionally, the AXP806/AXP808 DC-DC regulators support poly-phase arrangements
for higher output current. The possible groupings are: A+B, A+B+C, D+E.
AXP809 regulators, type, and corresponding input supply names:
--
2.10.2
Powered by blists - more mailing lists