| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20170208080010.ntaavpe5wbipn4dl@lukather>
Date: Wed, 8 Feb 2017 09:00:10 +0100
From: Maxime Ripard <maxime.ripard@...e-electrons.com>
To: Icenowy Zheng <icenowy@...c.xyz>
Cc: Chen-Yu Tsai <wens@...e.org>, Russell King <linux@...linux.org.uk>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
Mark Brown <broonie@...nel.org>,
Jaroslav Kysela <perex@...ex.cz>,
Andre Przywara <andre.przywara@....com>,
linux-clk@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
alsa-devel@...a-project.org, linux-sunxi@...glegroups.com
Subject: Re: [PATCH v4 3/9] clk: sunxi-ng: add support for Allwinner H5 SoC
Hi,
On Wed, Feb 08, 2017 at 02:30:36AM +0800, Icenowy Zheng wrote:
> Allwinner H5 is a SoC that features a CCU like H3, but with MMC phase
> clocks removed (for new MMC controller) and a new bus gate/reset
> imported.
>
> Add support for it.
>
> Signed-off-by: Icenowy Zheng <icenowy@...c.xyz>
> ---
> Changes since v3:
> - Add a dedicated reset line list for H5, as SCR1 reset is not valid
> on H3.
>
> .../devicetree/bindings/clock/sunxi-ccu.txt | 1 +
> drivers/clk/sunxi-ng/Kconfig | 2 +-
> drivers/clk/sunxi-ng/ccu-sunxi-h3-h5.c | 206 ++++++++++++++++++++-
> drivers/clk/sunxi-ng/ccu-sunxi-h3-h5.h | 5 +-
> include/dt-bindings/clock/sunxi-h3-h5-ccu.h | 3 +
> include/dt-bindings/reset/sunxi-h3-h5-ccu.h | 3 +
> 6 files changed, 215 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
> index bae5668cf427..68512aa398a9 100644
> --- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
> +++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
> @@ -10,6 +10,7 @@ Required properties :
> - "allwinner,sun8i-v3s-ccu"
> - "allwinner,sun9i-a80-ccu"
> - "allwinner,sun50i-a64-ccu"
> + - "allwinner,sun50i-h5-ccu"
>
> - reg: Must contain the registers base address and length
> - clocks: phandle to the oscillators feeding the CCU. Two are needed:
> diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
> index edc5bbbcb5bb..ec3e5f56b6ec 100644
> --- a/drivers/clk/sunxi-ng/Kconfig
> +++ b/drivers/clk/sunxi-ng/Kconfig
> @@ -117,7 +117,7 @@ config SUNXI_H3_H5_CCU
> select SUNXI_CCU_NM
> select SUNXI_CCU_MP
> select SUNXI_CCU_PHASE
> - default MACH_SUN8I
> + default MACH_SUN8I || (ARM64 && ARCH_SUNXI)
>
> config SUN8I_V3S_CCU
> bool "Support for the Allwinner V3s CCU"
> diff --git a/drivers/clk/sunxi-ng/ccu-sunxi-h3-h5.c b/drivers/clk/sunxi-ng/ccu-sunxi-h3-h5.c
> index e2d065973794..360709966e8f 100644
> --- a/drivers/clk/sunxi-ng/ccu-sunxi-h3-h5.c
> +++ b/drivers/clk/sunxi-ng/ccu-sunxi-h3-h5.c
> @@ -302,6 +302,8 @@ static SUNXI_CCU_GATE(bus_uart3_clk, "bus-uart3", "apb2",
> 0x06c, BIT(19), 0);
> static SUNXI_CCU_GATE(bus_scr0_clk, "bus-scr0", "apb2",
> 0x06c, BIT(20), 0);
> +static SUNXI_CCU_GATE(bus_scr1_clk, "bus-scr1", "apb2",
> + 0x06c, BIT(21), 0);
>
> static SUNXI_CCU_GATE(bus_ephy_clk, "bus-ephy", "ahb1",
> 0x070, BIT(0), 0);
> @@ -547,6 +549,7 @@ static struct ccu_common *sunxi_h3_h5_ccu_clks[] = {
> &bus_uart2_clk.common,
> &bus_uart3_clk.common,
> &bus_scr0_clk.common,
> + &bus_scr1_clk.common,
There's only one SCR gate in the H3.
> &bus_ephy_clk.common,
> &bus_dbg_clk.common,
> &ths_clk.common,
> @@ -730,7 +733,186 @@ static struct clk_hw_onecell_data sun8i_h3_hw_clks = {
> .num = CLK_NUMBER,
> };
>
> -static struct ccu_reset_map sunxi_h3_h5_ccu_resets[] = {
> +static struct clk_hw_onecell_data sun50i_h5_hw_clks = {
> + .hws = {
> + [CLK_PLL_CPUX] = &pll_cpux_clk.common.hw,
> + [CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw,
> + [CLK_PLL_AUDIO] = &pll_audio_clk.hw,
> + [CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
> + [CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
> + [CLK_PLL_AUDIO_8X] = &pll_audio_8x_clk.hw,
> + [CLK_PLL_VIDEO] = &pll_video_clk.common.hw,
> + [CLK_PLL_VE] = &pll_ve_clk.common.hw,
> + [CLK_PLL_DDR] = &pll_ddr_clk.common.hw,
> + [CLK_PLL_PERIPH0] = &pll_periph0_clk.common.hw,
> + [CLK_PLL_PERIPH0_2X] = &pll_periph0_2x_clk.hw,
> + [CLK_PLL_GPU] = &pll_gpu_clk.common.hw,
> + [CLK_PLL_PERIPH1] = &pll_periph1_clk.common.hw,
> + [CLK_PLL_DE] = &pll_de_clk.common.hw,
> + [CLK_CPUX] = &cpux_clk.common.hw,
> + [CLK_AXI] = &axi_clk.common.hw,
> + [CLK_AHB1] = &ahb1_clk.common.hw,
> + [CLK_APB1] = &apb1_clk.common.hw,
> + [CLK_APB2] = &apb2_clk.common.hw,
> + [CLK_AHB2] = &ahb2_clk.common.hw,
> + [CLK_BUS_CE] = &bus_ce_clk.common.hw,
> + [CLK_BUS_DMA] = &bus_dma_clk.common.hw,
> + [CLK_BUS_MMC0] = &bus_mmc0_clk.common.hw,
> + [CLK_BUS_MMC1] = &bus_mmc1_clk.common.hw,
> + [CLK_BUS_MMC2] = &bus_mmc2_clk.common.hw,
> + [CLK_BUS_NAND] = &bus_nand_clk.common.hw,
> + [CLK_BUS_DRAM] = &bus_dram_clk.common.hw,
> + [CLK_BUS_EMAC] = &bus_emac_clk.common.hw,
> + [CLK_BUS_TS] = &bus_ts_clk.common.hw,
> + [CLK_BUS_HSTIMER] = &bus_hstimer_clk.common.hw,
> + [CLK_BUS_SPI0] = &bus_spi0_clk.common.hw,
> + [CLK_BUS_SPI1] = &bus_spi1_clk.common.hw,
> + [CLK_BUS_OTG] = &bus_otg_clk.common.hw,
> + [CLK_BUS_EHCI0] = &bus_ehci0_clk.common.hw,
> + [CLK_BUS_EHCI1] = &bus_ehci1_clk.common.hw,
> + [CLK_BUS_EHCI2] = &bus_ehci2_clk.common.hw,
> + [CLK_BUS_EHCI3] = &bus_ehci3_clk.common.hw,
> + [CLK_BUS_OHCI0] = &bus_ohci0_clk.common.hw,
> + [CLK_BUS_OHCI1] = &bus_ohci1_clk.common.hw,
> + [CLK_BUS_OHCI2] = &bus_ohci2_clk.common.hw,
> + [CLK_BUS_OHCI3] = &bus_ohci3_clk.common.hw,
> + [CLK_BUS_VE] = &bus_ve_clk.common.hw,
> + [CLK_BUS_TCON0] = &bus_tcon0_clk.common.hw,
> + [CLK_BUS_TCON1] = &bus_tcon1_clk.common.hw,
> + [CLK_BUS_DEINTERLACE] = &bus_deinterlace_clk.common.hw,
> + [CLK_BUS_CSI] = &bus_csi_clk.common.hw,
> + [CLK_BUS_TVE] = &bus_tve_clk.common.hw,
> + [CLK_BUS_HDMI] = &bus_hdmi_clk.common.hw,
> + [CLK_BUS_DE] = &bus_de_clk.common.hw,
> + [CLK_BUS_GPU] = &bus_gpu_clk.common.hw,
> + [CLK_BUS_MSGBOX] = &bus_msgbox_clk.common.hw,
> + [CLK_BUS_SPINLOCK] = &bus_spinlock_clk.common.hw,
> + [CLK_BUS_CODEC] = &bus_codec_clk.common.hw,
> + [CLK_BUS_SPDIF] = &bus_spdif_clk.common.hw,
> + [CLK_BUS_PIO] = &bus_pio_clk.common.hw,
> + [CLK_BUS_THS] = &bus_ths_clk.common.hw,
> + [CLK_BUS_I2S0] = &bus_i2s0_clk.common.hw,
> + [CLK_BUS_I2S1] = &bus_i2s1_clk.common.hw,
> + [CLK_BUS_I2S2] = &bus_i2s2_clk.common.hw,
> + [CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw,
> + [CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw,
> + [CLK_BUS_I2C2] = &bus_i2c2_clk.common.hw,
> + [CLK_BUS_UART0] = &bus_uart0_clk.common.hw,
> + [CLK_BUS_UART1] = &bus_uart1_clk.common.hw,
> + [CLK_BUS_UART2] = &bus_uart2_clk.common.hw,
> + [CLK_BUS_UART3] = &bus_uart3_clk.common.hw,
> + [CLK_BUS_SCR0] = &bus_scr0_clk.common.hw,
> + [CLK_BUS_SCR1] = &bus_scr1_clk.common.hw,
> + [CLK_BUS_EPHY] = &bus_ephy_clk.common.hw,
> + [CLK_BUS_DBG] = &bus_dbg_clk.common.hw,
> + [CLK_THS] = &ths_clk.common.hw,
> + [CLK_NAND] = &nand_clk.common.hw,
> + [CLK_MMC0] = &mmc0_clk.common.hw,
> + [CLK_MMC1] = &mmc1_clk.common.hw,
> + [CLK_MMC2] = &mmc2_clk.common.hw,
> + [CLK_TS] = &ts_clk.common.hw,
> + [CLK_CE] = &ce_clk.common.hw,
> + [CLK_SPI0] = &spi0_clk.common.hw,
> + [CLK_SPI1] = &spi1_clk.common.hw,
> + [CLK_I2S0] = &i2s0_clk.common.hw,
> + [CLK_I2S1] = &i2s1_clk.common.hw,
> + [CLK_I2S2] = &i2s2_clk.common.hw,
> + [CLK_SPDIF] = &spdif_clk.common.hw,
> + [CLK_USB_PHY0] = &usb_phy0_clk.common.hw,
> + [CLK_USB_PHY1] = &usb_phy1_clk.common.hw,
> + [CLK_USB_PHY2] = &usb_phy2_clk.common.hw,
> + [CLK_USB_PHY3] = &usb_phy3_clk.common.hw,
> + [CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
> + [CLK_USB_OHCI1] = &usb_ohci1_clk.common.hw,
> + [CLK_USB_OHCI2] = &usb_ohci2_clk.common.hw,
> + [CLK_USB_OHCI3] = &usb_ohci3_clk.common.hw,
> + [CLK_DRAM] = &dram_clk.common.hw,
> + [CLK_DRAM_VE] = &dram_ve_clk.common.hw,
> + [CLK_DRAM_CSI] = &dram_csi_clk.common.hw,
> + [CLK_DRAM_DEINTERLACE] = &dram_deinterlace_clk.common.hw,
> + [CLK_DRAM_TS] = &dram_ts_clk.common.hw,
> + [CLK_DE] = &de_clk.common.hw,
> + [CLK_TCON0] = &tcon_clk.common.hw,
> + [CLK_TVE] = &tve_clk.common.hw,
> + [CLK_DEINTERLACE] = &deinterlace_clk.common.hw,
> + [CLK_CSI_MISC] = &csi_misc_clk.common.hw,
> + [CLK_CSI_SCLK] = &csi_sclk_clk.common.hw,
> + [CLK_CSI_MCLK] = &csi_mclk_clk.common.hw,
> + [CLK_VE] = &ve_clk.common.hw,
> + [CLK_AC_DIG] = &ac_dig_clk.common.hw,
> + [CLK_AVS] = &avs_clk.common.hw,
> + [CLK_HDMI] = &hdmi_clk.common.hw,
> + [CLK_HDMI_DDC] = &hdmi_ddc_clk.common.hw,
> + [CLK_MBUS] = &mbus_clk.common.hw,
> + [CLK_GPU] = &gpu_clk.common.hw,
> + },
> + .num = CLK_NUMBER,
> +};
> +
> +static struct ccu_reset_map sun8i_h3_ccu_resets[] = {
> + [RST_USB_PHY0] = { 0x0cc, BIT(0) },
> + [RST_USB_PHY1] = { 0x0cc, BIT(1) },
> + [RST_USB_PHY2] = { 0x0cc, BIT(2) },
> + [RST_USB_PHY3] = { 0x0cc, BIT(3) },
> +
> + [RST_MBUS] = { 0x0fc, BIT(31) },
> +
> + [RST_BUS_CE] = { 0x2c0, BIT(5) },
> + [RST_BUS_DMA] = { 0x2c0, BIT(6) },
> + [RST_BUS_MMC0] = { 0x2c0, BIT(8) },
> + [RST_BUS_MMC1] = { 0x2c0, BIT(9) },
> + [RST_BUS_MMC2] = { 0x2c0, BIT(10) },
> + [RST_BUS_NAND] = { 0x2c0, BIT(13) },
> + [RST_BUS_DRAM] = { 0x2c0, BIT(14) },
> + [RST_BUS_EMAC] = { 0x2c0, BIT(17) },
> + [RST_BUS_TS] = { 0x2c0, BIT(18) },
> + [RST_BUS_HSTIMER] = { 0x2c0, BIT(19) },
> + [RST_BUS_SPI0] = { 0x2c0, BIT(20) },
> + [RST_BUS_SPI1] = { 0x2c0, BIT(21) },
> + [RST_BUS_OTG] = { 0x2c0, BIT(23) },
> + [RST_BUS_EHCI0] = { 0x2c0, BIT(24) },
> + [RST_BUS_EHCI1] = { 0x2c0, BIT(25) },
> + [RST_BUS_EHCI2] = { 0x2c0, BIT(26) },
> + [RST_BUS_EHCI3] = { 0x2c0, BIT(27) },
> + [RST_BUS_OHCI0] = { 0x2c0, BIT(28) },
> + [RST_BUS_OHCI1] = { 0x2c0, BIT(29) },
> + [RST_BUS_OHCI2] = { 0x2c0, BIT(30) },
> + [RST_BUS_OHCI3] = { 0x2c0, BIT(31) },
> +
> + [RST_BUS_VE] = { 0x2c4, BIT(0) },
> + [RST_BUS_TCON0] = { 0x2c4, BIT(3) },
> + [RST_BUS_TCON1] = { 0x2c4, BIT(4) },
> + [RST_BUS_DEINTERLACE] = { 0x2c4, BIT(5) },
> + [RST_BUS_CSI] = { 0x2c4, BIT(8) },
> + [RST_BUS_TVE] = { 0x2c4, BIT(9) },
> + [RST_BUS_HDMI0] = { 0x2c4, BIT(10) },
> + [RST_BUS_HDMI1] = { 0x2c4, BIT(11) },
> + [RST_BUS_DE] = { 0x2c4, BIT(12) },
> + [RST_BUS_GPU] = { 0x2c4, BIT(20) },
> + [RST_BUS_MSGBOX] = { 0x2c4, BIT(21) },
> + [RST_BUS_SPINLOCK] = { 0x2c4, BIT(22) },
> + [RST_BUS_DBG] = { 0x2c4, BIT(31) },
> +
> + [RST_BUS_EPHY] = { 0x2c8, BIT(2) },
> +
> + [RST_BUS_CODEC] = { 0x2d0, BIT(0) },
> + [RST_BUS_SPDIF] = { 0x2d0, BIT(1) },
> + [RST_BUS_THS] = { 0x2d0, BIT(8) },
> + [RST_BUS_I2S0] = { 0x2d0, BIT(12) },
> + [RST_BUS_I2S1] = { 0x2d0, BIT(13) },
> + [RST_BUS_I2S2] = { 0x2d0, BIT(14) },
> +
> + [RST_BUS_I2C0] = { 0x2d8, BIT(0) },
> + [RST_BUS_I2C1] = { 0x2d8, BIT(1) },
> + [RST_BUS_I2C2] = { 0x2d8, BIT(2) },
> + [RST_BUS_UART0] = { 0x2d8, BIT(16) },
> + [RST_BUS_UART1] = { 0x2d8, BIT(17) },
> + [RST_BUS_UART2] = { 0x2d8, BIT(18) },
> + [RST_BUS_UART3] = { 0x2d8, BIT(19) },
> + [RST_BUS_SCR0] = { 0x2d8, BIT(20) },
> +};
> +
> +static struct ccu_reset_map sun50i_h5_ccu_resets[] = {
> [RST_USB_PHY0] = { 0x0cc, BIT(0) },
> [RST_USB_PHY1] = { 0x0cc, BIT(1) },
> [RST_USB_PHY2] = { 0x0cc, BIT(2) },
> @@ -791,6 +973,7 @@ static struct ccu_reset_map sunxi_h3_h5_ccu_resets[] = {
> [RST_BUS_UART2] = { 0x2d8, BIT(18) },
> [RST_BUS_UART3] = { 0x2d8, BIT(19) },
> [RST_BUS_SCR0] = { 0x2d8, BIT(20) },
> + [RST_BUS_SCR1] = { 0x2d8, BIT(21) },
> };
>
> static const struct sunxi_ccu_desc sun8i_h3_ccu_desc = {
> @@ -799,8 +982,18 @@ static const struct sunxi_ccu_desc sun8i_h3_ccu_desc = {
>
> .hw_clks = &sun8i_h3_hw_clks,
>
> - .resets = sunxi_h3_h5_ccu_resets,
> - .num_resets = ARRAY_SIZE(sunxi_h3_h5_ccu_resets),
> + .resets = sun8i_h3_ccu_resets,
> + .num_resets = ARRAY_SIZE(sun8i_h3_ccu_resets),
> +};
> +
> +static const struct sunxi_ccu_desc sun50i_h5_ccu_desc = {
> + .ccu_clks = sunxi_h3_h5_ccu_clks,
> + .num_ccu_clks = ARRAY_SIZE(sunxi_h3_h5_ccu_clks),
> +
> + .hw_clks = &sun50i_h5_hw_clks,
> +
> + .resets = sun50i_h5_ccu_resets,
> + .num_resets = ARRAY_SIZE(sun50i_h5_ccu_resets),
> };
>
> static struct ccu_mux_nb sunxi_h3_h5_cpu_nb = {
> @@ -840,3 +1033,10 @@ static void __init sun8i_h3_ccu_setup(struct device_node *node)
> }
> CLK_OF_DECLARE(sun8i_h3_ccu, "allwinner,sun8i-h3-ccu",
> sun8i_h3_ccu_setup);
> +
> +static void __init sun50i_h5_ccu_setup(struct device_node *node)
> +{
> + sunxi_h3_h5_ccu_init(node, &sun50i_h5_ccu_desc);
> +}
> +CLK_OF_DECLARE(sun50i_h5_ccu, "allwinner,sun50i-h5-ccu",
> + sun50i_h5_ccu_setup);
> diff --git a/drivers/clk/sunxi-ng/ccu-sunxi-h3-h5.h b/drivers/clk/sunxi-ng/ccu-sunxi-h3-h5.h
> index e2a4656d2cf3..e5a78cc66d6b 100644
> --- a/drivers/clk/sunxi-ng/ccu-sunxi-h3-h5.h
> +++ b/drivers/clk/sunxi-ng/ccu-sunxi-h3-h5.h
> @@ -57,6 +57,9 @@
>
> /* And the GPU module clock is exported */
>
> -#define CLK_NUMBER (CLK_GPU + 1)
> +/* New clocks imported in H5 */
H5 clocks seems more natural, and you don't have to put it twice.
> +/* The SCR1 bus gate is exported */
> +
> +#define CLK_NUMBER (CLK_BUS_SCR1 + 1)
This introduces an off-by-one error on the H3
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
Download attachment "signature.asc" of type "application/pgp-signature" (802 bytes)
Powered by blists - more mailing lists