[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20170208135121.GB32594@kroah.com>
Date: Wed, 8 Feb 2017 14:51:21 +0100
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: Alexander Stein <alexander.stein@...tec-electronic.com>
Cc: Mathias Nyman <mathias.nyman@...el.com>, linux-usb@...r.kernel.org,
linux-kernel@...r.kernel.org, "Wang, Yu" <yu.y.wang@...el.com>,
"Li, Guanglei" <guangleix.li@...el.com>,
"Wu, Hao" <hao.wu@...el.com>
Subject: Re: [PATCH v2 1/1] xhci: add USB2 test mode support
On Wed, Feb 08, 2017 at 02:44:44PM +0100, Alexander Stein wrote:
> This patch adds support for USB2 test mode (Test_J, Test_K,
> Test_SE0_NAK and Test_Packet) per XHCI spec 4.19.6.
>
> USB2 test mode is a required hardware feature for system integrators
> validating their hardware according to USB spec, regarding signal
> strength and stuff. It is purely a hardware test feature.
>
> Usually you need an oscilloscope and have to enable those test modes on
> the hardware. This will send some specific test patterns on D+/D-. There
> is no report available (in Linux itself) as it is purely externally
> visible. Regular USB usage is not possible at that time.
> Anyone (well access to e.g. /dev/bus/usb/001/001 provided) can use it by
> sending appropriate USB_PORT_FEAT_TEST requests to the hub.
> The same feature for ehci based hosts is already available at
> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/drivers/usb/host/ehci-hub.c#n1267
>
> Signed-off-by: "Wang, Yu" <yu.y.wang@...el.com>
> Signed-off-by: "Li, Guanglei" <guangleix.li@...el.com>
> Signed-off-by: "Wu, Hao" <hao.wu@...el.com>
> Signed-off-by: Alexander Stein <alexander.stein@...tec-electronic.com>
> ---
> Changes in v2:
> * Added additional info about USB2 test modes itself into commit message
> * Add URL for same test mode feature on ehci hosts.
Much nicer, thanks.
Powered by blists - more mailing lists