linux-kernel - [PATCH v2 2/7] serial: exar: Fix initialization of EXAR registers for ports

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <d0cffd707a9b80418af28930defb3a29c7b49bbe.1486570149.git.jan.kiszka@siemens.com>
Date:   Wed,  8 Feb 2017 17:09:04 +0100
From:   Jan Kiszka <jan.kiszka@...mens.com>
To:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc:     Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        linux-serial@...r.kernel.org,
        Sudip Mukherjee <sudip.mukherjee@...ethink.co.uk>,
        Andy Shevchenko <andy.shevchenko@...il.com>
Subject: [PATCH v2 2/7] serial: exar: Fix initialization of EXAR registers for ports > 0

So far, pci_xr17v35x_setup always initialized 8XMODE, FCTR & Co. for
port 0 because it used the address of that port instead of moving the
pointer according to the port number. Fix this and remove the unneeded
temporary ioremap by moving default_setup up and reusing the membase it
fills into the port structure.

Fixes: 14faa8cce88e ("tty/8250 Add support for Commtech's Fastcom Async-335 and Fastcom Async-PCIe cards")
Signed-off-by: Jan Kiszka <jan.kiszka@...mens.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@...il.com>
---
 drivers/tty/serial/8250/8250_exar.c | 22 +++++++++-------------
 1 file changed, 9 insertions(+), 13 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 58469d9..f489f25 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -157,27 +157,23 @@ pci_xr17v35x_setup(struct exar8250 *priv, struct pci_dev *pcidev,
 	if (board->has_slave && idx >= 8)
 		port->port.uartclk /= 2;
 
-	p = pci_ioremap_bar(pcidev, 0);
-	if (!p)
-		return -ENOMEM;
+	ret = default_setup(priv, pcidev, idx, offset, port);
+	if (ret)
+		return ret;
 
-	/* Setup Multipurpose Input/Output pins. */
-	if (idx == 0)
-		setup_gpio(p);
+	p = port->port.membase;
 
 	writeb(0x00, p + UART_EXAR_8XMODE);
 	writeb(UART_FCTR_EXAR_TRGD, p + UART_EXAR_FCTR);
 	writeb(128, p + UART_EXAR_TXTRG);
 	writeb(128, p + UART_EXAR_RXTRG);
-	iounmap(p);
 
-	ret = default_setup(priv, pcidev, idx, offset, port);
-	if (ret)
-		return ret;
+	if (idx == 0) {
+		/* Setup Multipurpose Input/Output pins. */
+		setup_gpio(p);
 
-	if (idx == 0)
-		port->port.private_data =
-			xr17v35x_register_gpio(pcidev);
+		port->port.private_data = xr17v35x_register_gpio(pcidev);
+	}
 
 	return 0;
 }
-- 
2.1.4