| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 8 Feb 2017 16:51:15 -0800
From: Florian Fainelli <f.fainelli@...il.com>
To: Jon Mason <jon.mason@...adcom.com>,
David Miller <davem@...emloft.net>
Cc: rafal@...ecki.pl, bcm-kernel-feedback-list@...adcom.com,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
Joey Zhong <zhongx@...adcom.com>
Subject: Re: [PATCH net-next v2 3/3] net: ethernet: bgmac: driver power
manangement
On 02/08/2017 01:24 PM, Jon Mason wrote:
> From: Joey Zhong <zhongx@...adcom.com>
>
> Implement suspend/resume callbacks in the bgmac driver. This makes sure
> that we de-initialize and re-initialize the hardware correctly before
> entering suspend and when resuming.
>
> Signed-off-by: Joey Zhong <zhongx@...adcom.com>
> Signed-off-by: Jon Mason <jon.mason@...adcom.com>
> ---
> drivers/net/ethernet/broadcom/bgmac-platform.c | 34 +++++++++++++++++
> drivers/net/ethernet/broadcom/bgmac.c | 51 ++++++++++++++++++++++++++
> drivers/net/ethernet/broadcom/bgmac.h | 2 +
> 3 files changed, 87 insertions(+)
>
> diff --git a/drivers/net/ethernet/broadcom/bgmac-platform.c b/drivers/net/ethernet/broadcom/bgmac-platform.c
> index 2d153f7..3df91e7 100644
> --- a/drivers/net/ethernet/broadcom/bgmac-platform.c
> +++ b/drivers/net/ethernet/broadcom/bgmac-platform.c
> @@ -21,8 +21,12 @@
> #include <linux/of_net.h>
> #include "bgmac.h"
>
> +#define NICPM_PADRING_CFG 0x00000004
> #define NICPM_IOMUX_CTRL 0x00000008
>
> +#define NICPM_PADRING_CFG_INIT_VAL 0x74000000
> +#define NICPM_IOMUX_CTRL_INIT_VAL_AX 0x21880000
> +
> #define NICPM_IOMUX_CTRL_INIT_VAL 0x3196e000
> #define NICPM_IOMUX_CTRL_SPD_SHIFT 10
> #define NICPM_IOMUX_CTRL_SPD_10M 0
> @@ -108,6 +112,10 @@ static void bgmac_nicpm_speed_set(struct net_device *net_dev)
> if (!bgmac->plat.nicpm_base)
> return;
>
> + /* SET RGMII IO CONFIG */
> + writel(NICPM_PADRING_CFG_INIT_VAL,
> + bgmac->plat.nicpm_base + NICPM_PADRING_CFG);
> +
> val = NICPM_IOMUX_CTRL_INIT_VAL;
> switch (bgmac->net_dev->phydev->speed) {
> default:
> @@ -239,6 +247,31 @@ static int bgmac_remove(struct platform_device *pdev)
> return 0;
> }
>
> +#ifdef CONFIG_PM
> +static int bgmac_suspend(struct device *dev)
> +{
> + struct bgmac *bgmac = dev_get_drvdata(dev);
> +
> + return bgmac_enet_suspend(bgmac);
> +}
> +
> +static int bgmac_resume(struct device *dev)
> +{
> + struct bgmac *bgmac = dev_get_drvdata(dev);
> +
> + return bgmac_enet_resume(bgmac);
> +}
> +
> +static const struct dev_pm_ops bgmac_pm_ops = {
> + .suspend = bgmac_suspend,
> + .resume = bgmac_resume
> +};
> +
> +#define BGMAC_PM_OPS (&bgmac_pm_ops)
> +#else
> +#define BGMAC_PM_OPS NULL
> +#endif /* CONFIG_PM */
> +
> static const struct of_device_id bgmac_of_enet_match[] = {
> {.compatible = "brcm,amac",},
> {.compatible = "brcm,nsp-amac",},
> @@ -252,6 +285,7 @@ static struct platform_driver bgmac_enet_driver = {
> .driver = {
> .name = "bgmac-enet",
> .of_match_table = bgmac_of_enet_match,
> + .pm = BGMAC_PM_OPS
> },
> .probe = bgmac_probe,
> .remove = bgmac_remove,
> diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c
> index bd549f8..e78c91d 100644
> --- a/drivers/net/ethernet/broadcom/bgmac.c
> +++ b/drivers/net/ethernet/broadcom/bgmac.c
> @@ -1478,6 +1478,7 @@ int bgmac_enet_probe(struct bgmac *bgmac)
>
> net_dev->irq = bgmac->irq;
> SET_NETDEV_DEV(net_dev, bgmac->dev);
> + dev_set_drvdata(bgmac->dev, bgmac);
>
> if (!is_valid_ether_addr(bgmac->mac_addr)) {
> dev_err(bgmac->dev, "Invalid MAC addr: %pM\n",
> @@ -1551,5 +1552,55 @@ void bgmac_enet_remove(struct bgmac *bgmac)
> }
> EXPORT_SYMBOL_GPL(bgmac_enet_remove);
>
> +int bgmac_enet_suspend(struct bgmac *bgmac)
> +{
> + if (!netif_running(bgmac->net_dev))
> + return 0;
> +
> + phy_stop(bgmac->net_dev->phydev);
> +
> + netif_stop_queue(bgmac->net_dev);
> +
> + napi_disable(&bgmac->napi);
> +
> + netif_tx_lock(bgmac->net_dev);
> + netif_device_detach(bgmac->net_dev);
> + netif_tx_unlock(bgmac->net_dev);
> +
> + bgmac_chip_intrs_off(bgmac);
> + bgmac_chip_reset(bgmac);
> + bgmac_dma_cleanup(bgmac);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(bgmac_enet_suspend);
> +
> +int bgmac_enet_resume(struct bgmac *bgmac)
> +{
> + int rc;
> +
> + if (netif_running(bgmac->net_dev))
> + return 0;
This should be if (!netif_running()) here, if it is running, we need to
do all of what is below.
With that fixed:
Reviewed-by: Florian Fainelli <f.fainelli@...il.com>
> +
> + rc = bgmac_dma_init(bgmac);
> + if (rc)
> + return rc;
> +
> + bgmac_chip_init(bgmac);
> +
> + napi_enable(&bgmac->napi);
> +
> + netif_tx_lock(bgmac->net_dev);
> + netif_device_attach(bgmac->net_dev);
> + netif_tx_unlock(bgmac->net_dev);
> +
> + netif_start_queue(bgmac->net_dev);
> +
> + phy_start(bgmac->net_dev->phydev);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(bgmac_enet_resume);
> +
> MODULE_AUTHOR("Rafał Miłecki");
> MODULE_LICENSE("GPL");
> diff --git a/drivers/net/ethernet/broadcom/bgmac.h b/drivers/net/ethernet/broadcom/bgmac.h
> index 5a518fe..741ca27 100644
> --- a/drivers/net/ethernet/broadcom/bgmac.h
> +++ b/drivers/net/ethernet/broadcom/bgmac.h
> @@ -538,6 +538,8 @@ int bgmac_enet_probe(struct bgmac *bgmac);
> void bgmac_enet_remove(struct bgmac *bgmac);
> void bgmac_adjust_link(struct net_device *net_dev);
> int bgmac_phy_connect_direct(struct bgmac *bgmac);
> +int bgmac_enet_suspend(struct bgmac *bgmac);
> +int bgmac_enet_resume(struct bgmac *bgmac);
>
> struct mii_bus *bcma_mdio_mii_register(struct bgmac *bgmac);
> void bcma_mdio_mii_unregister(struct mii_bus *mii_bus);
>
--
Florian
Powered by blists - more mailing lists