[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CACQ1gAj5ebug28CJ2xiYWKohMhNbGr=tmy6mS-57CFq=K-bqyQ@mail.gmail.com>
Date: Thu, 9 Feb 2017 11:26:48 +0100
From: Richard Genoud <richard.genoud@...il.com>
To: Krzysztof Kozlowski <krzk@...nel.org>,
Marek Szyprowski <m.szyprowski@...sung.com>
Cc: Anand Moon <linux.amoon@...il.com>,
Bartłomiej Żołnierkiewicz
<b.zolnierkie@...sung.com>, Felipe Balbi <balbi@...nel.org>,
Huang Rui <ray.huang@....com>,
Javier Martinez Canillas <javier@....samsung.com>,
Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
Kukjin Kim <kgene@...nel.org>,
devicetree <devicetree@...r.kernel.org>,
Linux USB Mailing List <linux-usb@...r.kernel.org>,
"linux-samsung-soc@...r.kernel.org"
<linux-samsung-soc@...r.kernel.org>,
Linux Kernel <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] ARM: dts: Odroid XU4: fix USB3.0 ports
2017-01-27 8:29 GMT+01:00 Richard Genoud <richard.genoud@...il.com>:
> On 25/01/2017 15:17, Krzysztof Kozlowski wrote:
>> On Wed, Jan 25, 2017 at 3:48 PM, Marek Szyprowski
>> <m.szyprowski@...sung.com> wrote:
>>> Hi Krzysztof,
>>>
>>> On 2017-01-25 08:55, Krzysztof Kozlowski wrote:
>>>>
>>>> On Wed, Jan 25, 2017 at 7:51 AM, Anand Moon <linux.amoon@...il.com> wrote:
>>>>>
>>>>> On 24 January 2017 at 19:18, Richard Genoud <richard.genoud@...il.com>
>>>>> wrote:
>>>>>>
>>>>>> Since commit 2164a476205ccc ("usb: dwc3: set SUSPHY bit for all cores"),
>>>>>> the USB ports on odroid-XU4 don't work anymore.
>>>>>>
>>>>>> Inserting an usb key (USB2.0) on the USB3.0 port result in:
>>>>>> [ 64.488264] xhci-hcd xhci-hcd.2.auto: Port resume took longer than
>>>>>> 20000 msec, port status = 0xc400fe3
>>>>>> [ 74.568156] xhci-hcd xhci-hcd.2.auto: xHCI host not responding to
>>>>>> stop endpoint command.
>>>>>> [ 74.574806] xhci-hcd xhci-hcd.2.auto: Assuming host is dying, halting
>>>>>> host.
>>>>>> [ 74.601970] xhci-hcd xhci-hcd.2.auto: HC died; cleaning up
>>>>>> [ 74.606276] usb 3-1: USB disconnect, device number 2
>>>>>> [ 74.613565] usb 4-1: USB disconnect, device number 2
>>>>>> [ 74.621208] usb usb3-port1: couldn't allocate usb_device
>>>>>> NB: it's not related to USB2.0 devices, I get the same result with an
>>>>>> USB3.0 device (SATA to USB3 for instance).
>>>>>> NB2: it doesn't happen on an odriod-XU3 board, that doesn't have the
>>>>>> realtek RTL8153 chip.
>>>>>>
>>>>>> If the lines:
>>>>>> if (dwc->revision > DWC3_REVISION_194A)
>>>>>> reg |= DWC3_GUSB3PIPECTL_SUSPHY;
>>>>>> are commented out, the USB3.0 start working.
>>>>>>
>>>>>> For a full analyse: https://lkml.org/lkml/2017/1/18/678
>>>>>>
>>>>>> Felipe suggested that suspend should be disabled temporarily while
>>>>>> what's wrong with DCW3 is figured out.
>>>>>>
>>>>>> Tested on Odroid XU4
>>>>>>
>>>>>> Suggested-by: Felipe Balbi <felipe.balbi@...ux.intel.com>
>>>>>> Tested-by: Richard Genoud <richard.genoud@...il.com>
>>>>>> Signed-off-by: Richard Genoud <richard.genoud@...il.com>
>>>>>> Cc: stable@...r.kernel.org # 4.4+
>>>>>> Fixes: 2164a476205ccc ("usb: dwc3: set SUSPHY bit for all cores")
>>>>>> ---
>>>>>> arch/arm/boot/dts/exynos5422-odroidxu4.dts | 9 +++++++++
>>>>>> 1 file changed, 9 insertions(+)
>>>>>>
>>>>>> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts
>>>>>> b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
>>>>>> index 2faf88627a48..f62dbd9b5ad3 100644
>>>>>> --- a/arch/arm/boot/dts/exynos5422-odroidxu4.dts
>>>>>> +++ b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
>>>>>> @@ -43,6 +43,15 @@
>>>>>> status = "okay";
>>>>>> };
>>>>>>
>>>>>> +&usbdrd_dwc3_0 {
>>>>>> + /*
>>>>>> + * without that, usb devices are not recognized when
>>>>>> + * they are plugged.
>>>>>> + * cf: https://lkml.org/lkml/2017/1/18/678
>>>>>> + */
>>>>>> + snps,dis_u3_susphy_quirk;
>>>>>> +};
>>>>>> +
>>>>>> &usbdrd_dwc3_1 {
>>>>>> dr_mode = "host";
>>>>>> };
>>>>>> --
>>>>>
>>>>> Thanks for this patch.
>>>>> But could you consider moving this changes as below.
>>>>>
>>>>> https://lkml.org/lkml/2015/3/18/400
>>>>
>>>> The patch above (and other DTS patches from the set) was not even sent
>>>> to linux-samsung-soc nor to me... It is sad how easily one's work can
>>>> disappear. Also, it is really worthless to solve the same problem
>>>> twice.
>>>
>>>
>>> Well, they were sent about 2 years ago... and you were also working on this
>>> topic. ;)
>>
>> Nope, I have never worked on this. That time I was in Korea so my
>> tasks were completely different. Later when I got back, I took for a
>> second U3 OTG which was not involving this thing.
>>
>>>> Cc Marek and Bartlomiej,
>>>> Guys, do you want to continue with Robert's patch (linked above by
>>>> Anand)? If yes, please take the ownership (Robert's address is not
>>>> valid anymore). If not, I will take Richard's patch after
>>>> resubmission.
>>>
>>>
>>> Take Richard's patch because it has a bit more details describing why such
>>> quirk
>>> is needed.
>>>
>>> Richard: in Roberts patch there is also a quirk for USB 2.0 mode
>>> (snps,dis_u2_susphy_quirk). Could you check if it really needed?
>>>
>>> Maybe it would make sense to set those quirks for both DWC3 controllers, as
>>> this
>>> issue with PHY suspend seems to be a Exynos specific thing.
>>
>> Okay,
>> Richard, please continue with your patch.
> Ok, I'll grab a XU3 & XU4 and do some more tests.
> But I didn't recall having problems with the XU3 board. I'll try to add
> a hub or something.
>
I did some tests with XU3 and XU4, playing with USB2 and USB3 quirks
(snps,dis_u{2,3}_susphy_quirk)
kernel for the tests: next-20170206
DTBs: exynos5422-odroidxu3-lite.dtb exynos5422-odroidxu4.dtb
USB devices used for the tests: kingston USB3 key, Akasa sata/USB3
+SSD standard USB2 key
once recognized, a dd if=/dev/sda bs=1M count=100 of=/dev/null is done.
The results are:
- On XU4:
- adding snps,dis_u2_susphy_quirk doesn't change anything:
inserting an USB2 or USB3 device gives the error message:
xhci-hcd xhci-hcd.2.auto: Port resume took longer than 20000 msec,
port status = 0xc400fe3
- with snps,dis_u3_susphy_quirk, USB2 and USB3 devices are recognized
- On XU3:
- Without changing XU3 dts, USB2 devices are recognized.
- With or without the snps,dis_u3_susphy_quirk, USB3 devices are not
recognized/not working properly
(never seen or disconnected, unable to enumerate, etc.)
However, adding an external powered USB3 hub in between works. (with
or without the snps,dis_u3_susphy_quirk)
Anyway, this problem doesn't seems to be related to the other since
addind the quirks doesn't change anything.
- On XU3 USB3 device port (dr_mode = "peripheral"):
- acting as an ethernet gadget only works with the snps,dis_u3_susphy_quirk.
It works well as USB2 or USB3 (tested with ethernet gadget+iperf)
So, at the end, it does seem usefull to add the
snps,dis_u3_susphy_quirk at the exynos5420.dtsi level.
Adding the snps,dis_u2_susphy_quirk doesn't seems to change anything
for XU3/XU4 board,
so I don't know if it is necessary or not.
Powered by blists - more mailing lists