[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20170209131211.GA16072@linux-mips.org>
Date: Thu, 9 Feb 2017 14:12:11 +0100
From: Ralf Baechle <ralf@...ux-mips.org>
To: netdev@...r.kernel.org, "David S. Miller" <davem@...emloft.net>,
Andrew Morton <akpm@...ux-foundation.org>,
linux-kernel@...r.kernel.org
Cc: Thomas Osterried <thomas@...erried.de>
Subject: [PATCH] NET: mkiss: Fix panic
If a USB-to-serial adapter is unplugged, the driver re-initializes, with
dev->hard_header_len and dev->addr_len set to zero, instead of the correct
values. If then a packet is sent through the half-dead interface, the
kernel will panic due to running out of headroom in the skb when pushing
for the AX.25 headers resulting in this panic:
[<c0595468>] (skb_panic) from [<c0401f70>] (skb_push+0x4c/0x50)
[<c0401f70>] (skb_push) from [<bf0bdad4>] (ax25_hard_header+0x34/0xf4 [ax25])
[<bf0bdad4>] (ax25_hard_header [ax25]) from [<bf0d05d4>] (ax_header+0x38/0x40 [mkiss])
[<bf0d05d4>] (ax_header [mkiss]) from [<c041b584>] (neigh_compat_output+0x8c/0xd8)
[<c041b584>] (neigh_compat_output) from [<c043e7a8>] (ip_finish_output+0x2a0/0x914)
[<c043e7a8>] (ip_finish_output) from [<c043f948>] (ip_output+0xd8/0xf0)
[<c043f948>] (ip_output) from [<c043f04c>] (ip_local_out_sk+0x44/0x48)
This patch makes mkiss behave like the 6pack driver. 6pack does not
panic. In 6pack.c sp_setup() (same function name here) the values for
dev->hard_header_len and dev->addr_len are set to the same values as in
my mkiss patch.
[ralf@...ux-mips.org: Massages original submission to conform to the usual
standards for patch submissions.]
Signed-off-by: Thomas Osterried <thomas@...erried.de>
Signed-off-by: Ralf Baechle <ralf@...ux-mips.org>
---
drivers/net/hamradio/mkiss.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c
index 1dfe230..e0a6b1a 100644
--- a/drivers/net/hamradio/mkiss.c
+++ b/drivers/net/hamradio/mkiss.c
@@ -648,8 +648,8 @@ static void ax_setup(struct net_device *dev)
{
/* Finish setting up the DEVICE info. */
dev->mtu = AX_MTU;
- dev->hard_header_len = 0;
- dev->addr_len = 0;
+ dev->hard_header_len = AX25_MAX_HEADER_LEN;
+ dev->addr_len = AX25_ADDR_LEN;
dev->type = ARPHRD_AX25;
dev->tx_queue_len = 10;
dev->header_ops = &ax25_header_ops;
Powered by blists - more mailing lists