| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1486793980.1874.7.camel@HansenPartnership.com>
Date: Fri, 10 Feb 2017 22:19:40 -0800
From: James Bottomley <James.Bottomley@...senPartnership.com>
To: Andrew Morton <akpm@...ux-foundation.org>,
Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-scsi <linux-scsi@...r.kernel.org>,
linux-kernel <linux-kernel@...r.kernel.org>
Subject: [GIT PULL] SCSI fixes for 4.10-rc7
Six fairly small fixes. None is a real show stopper, two automation
detected problems: one memory leak, one use after free and four others
each of which fixes something that has been a significant source of
annoyance to someone.
The patch is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes
The short changelog is:
Bart Van Assche (1):
scsi: qla2xxx: Fix a recently introduced memory leak
Dave Carroll (1):
scsi: aacraid: Fix INTx/MSI-x issue with older controllers
Mauricio Faria de Oliveira (1):
scsi: qla2xxx: Avoid that issuing a LIP triggers a kernel crash
Ram Pai (1):
scsi: mpt3sas: Force request partial completion alignment
Steffen Maier (1):
scsi: zfcp: fix use-after-free by not tracing WKA port open/close on failed send
ojab (1):
scsi: mpt3sas: disable ASPM for MPI2 controllers
And the diffstat:
drivers/s390/scsi/zfcp_fsf.c | 8 ++++----
drivers/scsi/aacraid/comminit.c | 8 ++++++--
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 18 ++++++++++++++++++
drivers/scsi/qla2xxx/qla_isr.c | 3 ++-
drivers/scsi/qla2xxx/qla_os.c | 2 +-
5 files changed, 31 insertions(+), 8 deletions(-)
With full diff below.
James
---
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index 75f820ca..27ff38f 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -1583,7 +1583,7 @@ static void zfcp_fsf_open_wka_port_handler(struct zfcp_fsf_req *req)
int zfcp_fsf_open_wka_port(struct zfcp_fc_wka_port *wka_port)
{
struct zfcp_qdio *qdio = wka_port->adapter->qdio;
- struct zfcp_fsf_req *req = NULL;
+ struct zfcp_fsf_req *req;
int retval = -EIO;
spin_lock_irq(&qdio->req_q_lock);
@@ -1612,7 +1612,7 @@ int zfcp_fsf_open_wka_port(struct zfcp_fc_wka_port *wka_port)
zfcp_fsf_req_free(req);
out:
spin_unlock_irq(&qdio->req_q_lock);
- if (req && !IS_ERR(req))
+ if (!retval)
zfcp_dbf_rec_run_wka("fsowp_1", wka_port, req->req_id);
return retval;
}
@@ -1638,7 +1638,7 @@ static void zfcp_fsf_close_wka_port_handler(struct zfcp_fsf_req *req)
int zfcp_fsf_close_wka_port(struct zfcp_fc_wka_port *wka_port)
{
struct zfcp_qdio *qdio = wka_port->adapter->qdio;
- struct zfcp_fsf_req *req = NULL;
+ struct zfcp_fsf_req *req;
int retval = -EIO;
spin_lock_irq(&qdio->req_q_lock);
@@ -1667,7 +1667,7 @@ int zfcp_fsf_close_wka_port(struct zfcp_fc_wka_port *wka_port)
zfcp_fsf_req_free(req);
out:
spin_unlock_irq(&qdio->req_q_lock);
- if (req && !IS_ERR(req))
+ if (!retval)
zfcp_dbf_rec_run_wka("fscwp_1", wka_port, req->req_id);
return retval;
}
diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c
index 4f56b10..5b48bed 100644
--- a/drivers/scsi/aacraid/comminit.c
+++ b/drivers/scsi/aacraid/comminit.c
@@ -50,9 +50,13 @@ struct aac_common aac_config = {
static inline int aac_is_msix_mode(struct aac_dev *dev)
{
- u32 status;
+ u32 status = 0;
- status = src_readl(dev, MUnit.OMR);
+ if (dev->pdev->device == PMC_DEVICE_S6 ||
+ dev->pdev->device == PMC_DEVICE_S7 ||
+ dev->pdev->device == PMC_DEVICE_S8) {
+ status = src_readl(dev, MUnit.OMR);
+ }
return (status & AAC_INT_MODE_MSIX);
}
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 75f3fce..0b5b423 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -51,6 +51,7 @@
#include <linux/workqueue.h>
#include <linux/delay.h>
#include <linux/pci.h>
+#include <linux/pci-aspm.h>
#include <linux/interrupt.h>
#include <linux/aer.h>
#include <linux/raid_class.h>
@@ -4657,6 +4658,7 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
struct MPT3SAS_DEVICE *sas_device_priv_data;
u32 response_code = 0;
unsigned long flags;
+ unsigned int sector_sz;
mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
scmd = _scsih_scsi_lookup_get_clear(ioc, smid);
@@ -4715,6 +4717,20 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
}
xfer_cnt = le32_to_cpu(mpi_reply->TransferCount);
+
+ /* In case of bogus fw or device, we could end up having
+ * unaligned partial completion. We can force alignment here,
+ * then scsi-ml does not need to handle this misbehavior.
+ */
+ sector_sz = scmd->device->sector_size;
+ if (unlikely(scmd->request->cmd_type == REQ_TYPE_FS && sector_sz &&
+ xfer_cnt % sector_sz)) {
+ sdev_printk(KERN_INFO, scmd->device,
+ "unaligned partial completion avoided (xfer_cnt=%u, sector_sz=%u)\n",
+ xfer_cnt, sector_sz);
+ xfer_cnt = round_down(xfer_cnt, sector_sz);
+ }
+
scsi_set_resid(scmd, scsi_bufflen(scmd) - xfer_cnt);
if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE)
log_info = le32_to_cpu(mpi_reply->IOCLogInfo);
@@ -8746,6 +8762,8 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
switch (hba_mpi_version) {
case MPI2_VERSION:
+ pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S |
+ PCIE_LINK_STATE_L1 | PCIE_LINK_STATE_CLKPM);
/* Use mpt2sas driver host template for SAS 2.0 HBA's */
shost = scsi_host_alloc(&mpt2sas_driver_template,
sizeof(struct MPT3SAS_ADAPTER));
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 54e1223..28ffafe 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -3238,7 +3238,7 @@ qla2x00_free_irqs(scsi_qla_host_t *vha)
* from a probe failure context.
*/
if (!ha->rsp_q_map || !ha->rsp_q_map[0])
- return;
+ goto free_irqs;
rsp = ha->rsp_q_map[0];
if (ha->flags.msix_enabled) {
@@ -3258,6 +3258,7 @@ qla2x00_free_irqs(scsi_qla_host_t *vha)
free_irq(pci_irq_vector(ha->pdev, 0), rsp);
}
+free_irqs:
pci_free_irq_vectors(ha->pdev);
}
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index ad4edc1..1cd3c48 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1616,7 +1616,7 @@ qla2x00_abort_all_cmds(scsi_qla_host_t *vha, int res)
/* Don't abort commands in adapter during EEH
* recovery as it's not accessible/responding.
*/
- if (!ha->flags.eeh_busy) {
+ if (GET_CMD_SP(sp) && !ha->flags.eeh_busy) {
/* Get a reference to the sp and drop the lock.
* The reference ensures this sp->done() call
* - and not the call in qla2xxx_eh_abort() -
Powered by blists - more mailing lists