| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <12e52c0c-1e40-3276-7c24-43cc670f00a4@xs4all.nl>
Date: Mon, 13 Feb 2017 15:00:37 +0100
From: Hans Verkuil <hverkuil@...all.nl>
To: Arnd Bergmann <arnd@...db.de>,
Mauro Carvalho Chehab <mchehab@...nel.org>
Cc: linux-media@...r.kernel.org, linux-kernel@...r.kernel.org,
Frank Schäfer <fschaefer.oss@...glemail.com>
Subject: Re: [PATCH 2/4] [media] em28xx: reduce stack usage in probe functions
Hi Arnd,
I'll take the others of this patch series, but will postpone this one until it has
been tested.
I've asked Frank to see if he can test it, if not, then it will have to wait until
March when I have access to an omnivision-em28xx device.
Regards,
Hans
On 02/02/2017 03:53 PM, Arnd Bergmann wrote:
> The two i2c probe functions use a lot of stack since they put
> an i2c_client structure in a local variable:
>
> drivers/media/usb/em28xx/em28xx-camera.c: In function 'em28xx_probe_sensor_micron':
> drivers/media/usb/em28xx/em28xx-camera.c:205:1: error: the frame size of 1256 bytes is larger than 1152 bytes [-Werror=frame-larger-than=]
> drivers/media/usb/em28xx/em28xx-camera.c: In function 'em28xx_probe_sensor_omnivision':
> drivers/media/usb/em28xx/em28xx-camera.c:317:1: error: the frame size of 1248 bytes is larger than 1152 bytes [-Werror=frame-larger-than=]
>
> This cleans up both of the above by removing the need for those
> structures, calling the lower-level i2c function directly.
>
> Signed-off-by: Arnd Bergmann <arnd@...db.de>
> ---
> drivers/media/usb/em28xx/em28xx-camera.c | 87 ++++++++++++++++++--------------
> 1 file changed, 50 insertions(+), 37 deletions(-)
>
> diff --git a/drivers/media/usb/em28xx/em28xx-camera.c b/drivers/media/usb/em28xx/em28xx-camera.c
> index 89c890ba7dd6..e64940f95a91 100644
> --- a/drivers/media/usb/em28xx/em28xx-camera.c
> +++ b/drivers/media/usb/em28xx/em28xx-camera.c
> @@ -99,6 +99,25 @@ static int em28xx_initialize_mt9m001(struct em28xx *dev)
> return 0;
> }
>
> +/* NOTE: i2c_smbus_read_word_data() doesn't work with BE data */
> +static int em28xx_i2c_read_chip_id(struct em28xx *dev, u16 addr, u8 reg, void *buf)
> +{
> + struct i2c_client *client = &dev->i2c_client[dev->def_i2c_bus];
> + struct i2c_msg msg[2];
> +
> + msg[0].addr = addr;
> + msg[0].flags = client->flags & I2C_M_TEN;
> + msg[0].len = 1;
> + msg[0].buf = ®
> + msg[1].addr = addr;
> + msg[1].flags = client->flags & I2C_M_TEN;
> + msg[1].flags |= I2C_M_RD;
> + msg[1].len = 2;
> + msg[1].buf = buf;
> +
> + return i2c_transfer(client->adapter, msg, 2);
> +}
> +
> /*
> * Probes Micron sensors with 8 bit address and 16 bit register width
> */
> @@ -106,48 +125,29 @@ static int em28xx_probe_sensor_micron(struct em28xx *dev)
> {
> int ret, i;
> char *name;
> - u8 reg;
> __be16 id_be;
> + u16 addr;
> u16 id;
>
> - struct i2c_client client = dev->i2c_client[dev->def_i2c_bus];
> -
> dev->em28xx_sensor = EM28XX_NOSENSOR;
> for (i = 0; micron_sensor_addrs[i] != I2C_CLIENT_END; i++) {
> - client.addr = micron_sensor_addrs[i];
> - /* NOTE: i2c_smbus_read_word_data() doesn't work with BE data */
> + addr = micron_sensor_addrs[i];
> /* Read chip ID from register 0x00 */
> - reg = 0x00;
> - ret = i2c_master_send(&client, ®, 1);
> + ret = em28xx_i2c_read_chip_id(dev, addr, 0x00, &id_be);
> if (ret < 0) {
> if (ret != -ENXIO)
> dev_err(&dev->intf->dev,
> "couldn't read from i2c device 0x%02x: error %i\n",
> - client.addr << 1, ret);
> - continue;
> - }
> - ret = i2c_master_recv(&client, (u8 *)&id_be, 2);
> - if (ret < 0) {
> - dev_err(&dev->intf->dev,
> - "couldn't read from i2c device 0x%02x: error %i\n",
> - client.addr << 1, ret);
> + addr << 1, ret);
> continue;
> }
> id = be16_to_cpu(id_be);
> /* Read chip ID from register 0xff */
> - reg = 0xff;
> - ret = i2c_master_send(&client, ®, 1);
> + ret = em28xx_i2c_read_chip_id(dev, addr, 0xff, &id_be);
> if (ret < 0) {
> dev_err(&dev->intf->dev,
> "couldn't read from i2c device 0x%02x: error %i\n",
> - client.addr << 1, ret);
> - continue;
> - }
> - ret = i2c_master_recv(&client, (u8 *)&id_be, 2);
> - if (ret < 0) {
> - dev_err(&dev->intf->dev,
> - "couldn't read from i2c device 0x%02x: error %i\n",
> - client.addr << 1, ret);
> + addr << 1, ret);
> continue;
> }
> /* Validate chip ID to be sure we have a Micron device */
> @@ -197,13 +197,26 @@ static int em28xx_probe_sensor_micron(struct em28xx *dev)
> dev_info(&dev->intf->dev,
> "sensor %s detected\n", name);
>
> - dev->i2c_client[dev->def_i2c_bus].addr = client.addr;
> + dev->i2c_client[dev->def_i2c_bus].addr = addr;
> return 0;
> }
>
> return -ENODEV;
> }
>
> +/* like i2c_smbus_read_byte_data, but allows passing an addr */
> +static int em28xx_smbus_read_byte(struct em28xx *dev, u16 addr, u8 command)
> +{
> + struct i2c_client *client = &dev->i2c_client[dev->def_i2c_bus];
> + union i2c_smbus_data data;
> + int status;
> +
> + status = i2c_smbus_xfer(client->adapter, addr, client->flags,
> + I2C_SMBUS_READ, command,
> + I2C_SMBUS_BYTE_DATA, &data);
> + return (status < 0) ? status : data.byte;
> +}
> +
> /*
> * Probes Omnivision sensors with 8 bit address and register width
> */
> @@ -212,31 +225,31 @@ static int em28xx_probe_sensor_omnivision(struct em28xx *dev)
> int ret, i;
> char *name;
> u8 reg;
> + u16 addr;
> u16 id;
> - struct i2c_client client = dev->i2c_client[dev->def_i2c_bus];
>
> dev->em28xx_sensor = EM28XX_NOSENSOR;
> /* NOTE: these devices have the register auto incrementation disabled
> * by default, so we have to use single byte reads ! */
> for (i = 0; omnivision_sensor_addrs[i] != I2C_CLIENT_END; i++) {
> - client.addr = omnivision_sensor_addrs[i];
> + addr = omnivision_sensor_addrs[i];
> /* Read manufacturer ID from registers 0x1c-0x1d (BE) */
> reg = 0x1c;
> - ret = i2c_smbus_read_byte_data(&client, reg);
> + ret = em28xx_smbus_read_byte(dev, addr, reg);
> if (ret < 0) {
> if (ret != -ENXIO)
> dev_err(&dev->intf->dev,
> "couldn't read from i2c device 0x%02x: error %i\n",
> - client.addr << 1, ret);
> + addr << 1, ret);
> continue;
> }
> id = ret << 8;
> reg = 0x1d;
> - ret = i2c_smbus_read_byte_data(&client, reg);
> + ret = em28xx_smbus_read_byte(dev, addr, reg);
> if (ret < 0) {
> dev_err(&dev->intf->dev,
> "couldn't read from i2c device 0x%02x: error %i\n",
> - client.addr << 1, ret);
> + addr << 1, ret);
> continue;
> }
> id += ret;
> @@ -245,20 +258,20 @@ static int em28xx_probe_sensor_omnivision(struct em28xx *dev)
> continue;
> /* Read product ID from registers 0x0a-0x0b (BE) */
> reg = 0x0a;
> - ret = i2c_smbus_read_byte_data(&client, reg);
> + ret = em28xx_smbus_read_byte(dev, addr, reg);
> if (ret < 0) {
> dev_err(&dev->intf->dev,
> "couldn't read from i2c device 0x%02x: error %i\n",
> - client.addr << 1, ret);
> + addr << 1, ret);
> continue;
> }
> id = ret << 8;
> reg = 0x0b;
> - ret = i2c_smbus_read_byte_data(&client, reg);
> + ret = em28xx_smbus_read_byte(dev, addr, reg);
> if (ret < 0) {
> dev_err(&dev->intf->dev,
> "couldn't read from i2c device 0x%02x: error %i\n",
> - client.addr << 1, ret);
> + addr << 1, ret);
> continue;
> }
> id += ret;
> @@ -309,7 +322,7 @@ static int em28xx_probe_sensor_omnivision(struct em28xx *dev)
> dev_info(&dev->intf->dev,
> "sensor %s detected\n", name);
>
> - dev->i2c_client[dev->def_i2c_bus].addr = client.addr;
> + dev->i2c_client[dev->def_i2c_bus].addr = addr;
> return 0;
> }
>
>
Powered by blists - more mailing lists