| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1486956655-4261-2-git-send-email-yuantian.tang@nxp.com>
Date: Mon, 13 Feb 2017 11:30:55 +0800
From: <yuantian.tang@....com>
To: <rjw@...ysocki.net>
CC: <viresh.kumar@...aro.org>, <leoyang.li@....com>,
<linux-pm@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
Tang Yuantian <Yuantian.Tang@....com>,
Scott Wood <scottwood@....com>,
Tang Yuantian <yuantian.tang@....com>
Subject: [PATCH 2/2 v4] cpufreq: qoriq: Don't look at clock implementation details
From: Tang Yuantian <Yuantian.Tang@....com>
Get the CPU clock's potential parent clocks from the clock interface
itself, rather than manually parsing the clocks property to find a
phandle, looking at the clock-names property of that, and assuming that
those are valid parent clocks for the cpu clock.
This is necessary now that the clocks are generated based on the clock
driver's knowledge of the chip rather than a fragile device-tree
description of the mux options.
We can now rely on the clock driver to ensure that the mux only exposes
options that are valid. The cpufreq driver was currently being overly
conservative in some cases -- for example, the "min_cpufreq =
get_bus_freq()" restriction only applies to chips with erratum
A-004510, and whether the freq_mask used on p5020 is needed depends on
the actual frequencies of the PLLs (FWIW, p5040 has a similar
limitation but its .freq_mask was zero) -- and the frequency mask
mechanism made assumptions about particular parent clock indices that
are no longer valid.
Signed-off-by: Scott Wood <scottwood@....com>
Signed-off-by: Tang Yuantian <yuantian.tang@....com>
Acked-by: Viresh Kumar <viresh.kumar@...aro.org>
---
v2: added more soc compatible strings
v3: Remove the now-unused pnode and the call to of_node_put()
v4: fixed warning:
>> [-Werror=implicit-function-declaration]
> return get_hard_smp_processor_id(cpu);
drivers/cpufreq/qoriq-cpufreq.c | 152 +++++++++++++---------------------------
1 file changed, 49 insertions(+), 103 deletions(-)
diff --git a/drivers/cpufreq/qoriq-cpufreq.c b/drivers/cpufreq/qoriq-cpufreq.c
index 53d8c3f..bfec1bc 100644
--- a/drivers/cpufreq/qoriq-cpufreq.c
+++ b/drivers/cpufreq/qoriq-cpufreq.c
@@ -11,6 +11,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/clk.h>
+#include <linux/clk-provider.h>
#include <linux/cpufreq.h>
#include <linux/cpu_cooling.h>
#include <linux/errno.h>
@@ -22,10 +23,6 @@
#include <linux/slab.h>
#include <linux/smp.h>
-#if !defined(CONFIG_ARM)
-#include <asm/smp.h> /* for get_hard_smp_processor_id() in UP configs */
-#endif
-
/**
* struct cpu_data
* @pclk: the parent clock of cpu
@@ -37,53 +34,20 @@ struct cpu_data {
struct thermal_cooling_device *cdev;
};
+/*
+ * Don't use cpufreq on this SoC -- used when the SoC would have otherwise
+ * matched a more generic compatible.
+ */
+#define SOC_BLACKLIST 1
+
/**
* struct soc_data - SoC specific data
- * @freq_mask: mask the disallowed frequencies
- * @flag: unique flags
+ * @flags: SOC_xxx
*/
struct soc_data {
- u32 freq_mask[4];
- u32 flag;
+ u32 flags;
};
-#define FREQ_MASK 1
-/* see hardware specification for the allowed frqeuencies */
-static const struct soc_data sdata[] = {
- { /* used by p2041 and p3041 */
- .freq_mask = {0x8, 0x8, 0x2, 0x2},
- .flag = FREQ_MASK,
- },
- { /* used by p5020 */
- .freq_mask = {0x8, 0x2},
- .flag = FREQ_MASK,
- },
- { /* used by p4080, p5040 */
- .freq_mask = {0},
- .flag = 0,
- },
-};
-
-/*
- * the minimum allowed core frequency, in Hz
- * for chassis v1.0, >= platform frequency
- * for chassis v2.0, >= platform frequency / 2
- */
-static u32 min_cpufreq;
-static const u32 *fmask;
-
-#if defined(CONFIG_ARM)
-static int get_cpu_physical_id(int cpu)
-{
- return topology_core_id(cpu);
-}
-#else
-static int get_cpu_physical_id(int cpu)
-{
- return get_hard_smp_processor_id(cpu);
-}
-#endif
-
static u32 get_bus_freq(void)
{
struct device_node *soc;
@@ -101,9 +65,10 @@ static u32 get_bus_freq(void)
return sysfreq;
}
-static struct device_node *cpu_to_clk_node(int cpu)
+static struct clk *cpu_to_clk(int cpu)
{
- struct device_node *np, *clk_np;
+ struct device_node *np;
+ struct clk *clk;
if (!cpu_present(cpu))
return NULL;
@@ -112,37 +77,28 @@ static struct device_node *cpu_to_clk_node(int cpu)
if (!np)
return NULL;
- clk_np = of_parse_phandle(np, "clocks", 0);
- if (!clk_np)
- return NULL;
-
+ clk = of_clk_get(np, 0);
of_node_put(np);
-
- return clk_np;
+ return clk;
}
/* traverse cpu nodes to get cpu mask of sharing clock wire */
static void set_affected_cpus(struct cpufreq_policy *policy)
{
- struct device_node *np, *clk_np;
struct cpumask *dstp = policy->cpus;
+ struct clk *clk;
int i;
- np = cpu_to_clk_node(policy->cpu);
- if (!np)
- return;
-
for_each_present_cpu(i) {
- clk_np = cpu_to_clk_node(i);
- if (!clk_np)
+ clk = cpu_to_clk(i);
+ if (IS_ERR(clk)) {
+ pr_err("%s: no clock for cpu %d\n", __func__, i);
continue;
+ }
- if (clk_np == np)
+ if (clk_is_match(policy->clk, clk))
cpumask_set_cpu(i, dstp);
-
- of_node_put(clk_np);
}
- of_node_put(np);
}
/* reduce the duplicated frequencies in frequency table */
@@ -198,10 +154,11 @@ static void freq_table_sort(struct cpufreq_frequency_table *freq_table,
static int qoriq_cpufreq_cpu_init(struct cpufreq_policy *policy)
{
- struct device_node *np, *pnode;
+ struct device_node *np;
int i, count, ret;
- u32 freq, mask;
+ u32 freq;
struct clk *clk;
+ const struct clk_hw *hwclk;
struct cpufreq_frequency_table *table;
struct cpu_data *data;
unsigned int cpu = policy->cpu;
@@ -221,17 +178,13 @@ static int qoriq_cpufreq_cpu_init(struct cpufreq_policy *policy)
goto err_nomem2;
}
- pnode = of_parse_phandle(np, "clocks", 0);
- if (!pnode) {
- pr_err("%s: could not get clock information\n", __func__);
- goto err_nomem2;
- }
+ hwclk = __clk_get_hw(policy->clk);
+ count = clk_hw_get_num_parents(hwclk);
- count = of_property_count_strings(pnode, "clock-names");
data->pclk = kcalloc(count, sizeof(struct clk *), GFP_KERNEL);
if (!data->pclk) {
pr_err("%s: no memory\n", __func__);
- goto err_node;
+ goto err_nomem2;
}
table = kcalloc(count + 1, sizeof(*table), GFP_KERNEL);
@@ -240,23 +193,11 @@ static int qoriq_cpufreq_cpu_init(struct cpufreq_policy *policy)
goto err_pclk;
}
- if (fmask)
- mask = fmask[get_cpu_physical_id(cpu)];
- else
- mask = 0x0;
-
for (i = 0; i < count; i++) {
- clk = of_clk_get(pnode, i);
+ clk = clk_hw_get_parent_by_index(hwclk, i)->clk;
data->pclk[i] = clk;
freq = clk_get_rate(clk);
- /*
- * the clock is valid if its frequency is not masked
- * and large than minimum allowed frequency.
- */
- if (freq < min_cpufreq || (mask & (1 << i)))
- table[i].frequency = CPUFREQ_ENTRY_INVALID;
- else
- table[i].frequency = freq / 1000;
+ table[i].frequency = freq / 1000;
table[i].driver_data = i;
}
freq_table_redup(table, count);
@@ -282,7 +223,6 @@ static int qoriq_cpufreq_cpu_init(struct cpufreq_policy *policy)
policy->cpuinfo.transition_latency = u64temp + 1;
of_node_put(np);
- of_node_put(pnode);
return 0;
@@ -290,10 +230,7 @@ static int qoriq_cpufreq_cpu_init(struct cpufreq_policy *policy)
kfree(table);
err_pclk:
kfree(data->pclk);
-err_node:
- of_node_put(pnode);
err_nomem2:
- policy->driver_data = NULL;
kfree(data);
err_np:
of_node_put(np);
@@ -357,12 +294,25 @@ static struct cpufreq_driver qoriq_cpufreq_driver = {
.attr = cpufreq_generic_attr,
};
+static const struct soc_data blacklist = {
+ .flags = SOC_BLACKLIST,
+};
+
static const struct of_device_id node_matches[] __initconst = {
- { .compatible = "fsl,p2041-clockgen", .data = &sdata[0], },
- { .compatible = "fsl,p3041-clockgen", .data = &sdata[0], },
- { .compatible = "fsl,p5020-clockgen", .data = &sdata[1], },
- { .compatible = "fsl,p4080-clockgen", .data = &sdata[2], },
- { .compatible = "fsl,p5040-clockgen", .data = &sdata[2], },
+ /* e6500 cannot use cpufreq due to erratum A-008083 */
+ { .compatible = "fsl,b4420-clockgen", &blacklist },
+ { .compatible = "fsl,b4860-clockgen", &blacklist },
+ { .compatible = "fsl,t2080-clockgen", &blacklist },
+ { .compatible = "fsl,t4240-clockgen", &blacklist },
+
+ { .compatible = "fsl,ls1012a-clockgen", },
+ { .compatible = "fsl,ls1021a-clockgen", },
+ { .compatible = "fsl,ls1043a-clockgen", },
+ { .compatible = "fsl,ls1046a-clockgen", },
+ { .compatible = "fsl,ls1088a-clockgen", },
+ { .compatible = "fsl,ls2080a-clockgen", },
+ { .compatible = "fsl,p4080-clockgen", },
+ { .compatible = "fsl,qoriq-clockgen-1.0", },
{ .compatible = "fsl,qoriq-clockgen-2.0", },
{}
};
@@ -380,16 +330,12 @@ static int __init qoriq_cpufreq_init(void)
match = of_match_node(node_matches, np);
data = match->data;
- if (data) {
- if (data->flag)
- fmask = data->freq_mask;
- min_cpufreq = get_bus_freq();
- } else {
- min_cpufreq = get_bus_freq() / 2;
- }
of_node_put(np);
+ if (data && data->flags & SOC_BLACKLIST)
+ return -ENODEV;
+
ret = cpufreq_register_driver(&qoriq_cpufreq_driver);
if (!ret)
pr_info("Freescale QorIQ CPU frequency scaling driver\n");
--
2.1.0.27.g96db324
Powered by blists - more mailing lists