| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20170214200908.GA31242@singhal-Inspiron-5558>
Date: Wed, 15 Feb 2017 01:39:09 +0530
From: simran singhal <singhalsimran0@...il.com>
To: gregkh@...uxfoundation.org
Cc: devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org
Subject: [PATCH v2 3/9] staging: rtl8192u: Adding space after enum and struct
definition
Fixes checkpatch.pl warning:
WARNING: missing space after struct definition
WARNING: missing space after enum definition
Signed-off-by: simran singhal <singhalsimran0@...il.com>
---
drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h | 38 ++++++++++++-------------
1 file changed, 19 insertions(+), 19 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h b/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
index c3aabba..5f54d93 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
@@ -35,7 +35,7 @@
#define HT_SUPPORTED_MCS_1SS_2SS_BITMAP HT_MCS_1SS_BITMAP|HT_MCS_1SS_2SS_BITMAP
-typedef enum _HT_MCS_RATE{
+typedef enum _HT_MCS_RATE {
HT_MCS0 = 0x00000001,
HT_MCS1 = 0x00000002,
HT_MCS2 = 0x00000004,
@@ -58,7 +58,7 @@ typedef enum _HT_MCS_RATE{
//
// Represent Channel Width in HT Capabilities
//
-typedef enum _HT_CHANNEL_WIDTH{
+typedef enum _HT_CHANNEL_WIDTH {
HT_CHANNEL_WIDTH_20 = 0,
HT_CHANNEL_WIDTH_20_40 = 1,
}HT_CHANNEL_WIDTH, *PHT_CHANNEL_WIDTH;
@@ -67,14 +67,14 @@ typedef enum _HT_CHANNEL_WIDTH{
// Represent Extension Channel Offset in HT Capabilities
// This is available only in 40Mhz mode.
//
-typedef enum _HT_EXTCHNL_OFFSET{
+typedef enum _HT_EXTCHNL_OFFSET {
HT_EXTCHNL_OFFSET_NO_EXT = 0,
HT_EXTCHNL_OFFSET_UPPER = 1,
HT_EXTCHNL_OFFSET_NO_DEF = 2,
HT_EXTCHNL_OFFSET_LOWER = 3,
}HT_EXTCHNL_OFFSET, *PHT_EXTCHNL_OFFSET;
-typedef enum _CHNLOP{
+typedef enum _CHNLOP {
CHNLOP_NONE = 0, // No Action now
CHNLOP_SCAN = 1, // Scan in progress
CHNLOP_SWBW = 2, // Bandwidth switching in progress
@@ -119,7 +119,7 @@ typedef union _HT_CAPABILITY_MACPARA{
}HT_CAPABILITY_MACPARA, *PHT_CAPABILITY_MACPARA;
*/
-typedef enum _HT_ACTION{
+typedef enum _HT_ACTION {
ACT_RECOMMAND_WIDTH = 0,
ACT_MIMO_PWR_SAVE = 1,
ACT_PSMP = 2,
@@ -134,14 +134,14 @@ typedef enum _HT_ACTION{
/* 2007/06/07 MH Define sub-carrier mode for 40MHZ. */
-typedef enum _HT_Bandwidth_40MHZ_Sub_Carrier{
+typedef enum _HT_Bandwidth_40MHZ_Sub_Carrier {
SC_MODE_DUPLICATE = 0,
SC_MODE_LOWER = 1,
SC_MODE_UPPER = 2,
SC_MODE_FULL40MHZ = 3,
}HT_BW40_SC_E;
-typedef struct _HT_CAPABILITY_ELE{
+typedef struct _HT_CAPABILITY_ELE {
//HT capability info
u8 AdvCoding:1;
@@ -184,7 +184,7 @@ typedef struct _HT_CAPABILITY_ELE{
// Only AP is required to include this element
//------------------------------------------------------------
-typedef struct _HT_INFORMATION_ELE{
+typedef struct _HT_INFORMATION_ELE {
u8 ControlChl;
u8 ExtChlOffset:2;
@@ -215,18 +215,18 @@ typedef struct _HT_INFORMATION_ELE{
// MIMO Power Save control field.
// This is appear in MIMO Power Save Action Frame
//
-typedef struct _MIMOPS_CTRL{
+typedef struct _MIMOPS_CTRL {
u8 MimoPsEnable:1;
u8 MimoPsMode:1;
u8 Reserved:6;
} MIMOPS_CTRL, *PMIMOPS_CTRL;
-typedef enum _HT_SPEC_VER{
+typedef enum _HT_SPEC_VER {
HT_SPEC_VER_IEEE = 0,
HT_SPEC_VER_EWC = 1,
}HT_SPEC_VER, *PHT_SPEC_VER;
-typedef enum _HT_AGGRE_MODE_E{
+typedef enum _HT_AGGRE_MODE_E {
HT_AGG_AUTO = 0,
HT_AGG_FORCE_ENABLE = 1,
HT_AGG_FORCE_DISABLE = 2,
@@ -238,7 +238,7 @@ typedef enum _HT_AGGRE_MODE_E{
// to default value in HTInitializeHTInfo()
//------------------------------------------------------------
-typedef struct _RT_HIGH_THROUGHPUT{
+typedef struct _RT_HIGH_THROUGHPUT {
u8 bEnableHT;
u8 bCurrentHTSupport;
@@ -347,7 +347,7 @@ typedef struct _RT_HIGH_THROUGHPUT{
// when card is configured as "AP mode"
//------------------------------------------------------------
-typedef struct _RT_HTINFO_STA_ENTRY{
+typedef struct _RT_HTINFO_STA_ENTRY {
u8 bEnableHT;
u8 bSupportCck;
@@ -377,7 +377,7 @@ typedef struct _RT_HTINFO_STA_ENTRY{
// when card is configured as "STA mode"
//------------------------------------------------------------
-typedef struct _BSS_HT{
+typedef struct _BSS_HT {
u8 bdSupportHT;
@@ -395,7 +395,7 @@ typedef struct _BSS_HT{
u8 bdRT2RTLongSlotTime;
} __attribute__ ((packed)) BSS_HT, *PBSS_HT;
-typedef struct _MIMO_RSSI{
+typedef struct _MIMO_RSSI {
u32 EnableAntenna;
u32 AntennaA;
u32 AntennaB;
@@ -404,12 +404,12 @@ typedef struct _MIMO_RSSI{
u32 Average;
}MIMO_RSSI, *PMIMO_RSSI;
-typedef struct _MIMO_EVM{
+typedef struct _MIMO_EVM {
u32 EVM1;
u32 EVM2;
}MIMO_EVM, *PMIMO_EVM;
-typedef struct _FALSE_ALARM_STATISTICS{
+typedef struct _FALSE_ALARM_STATISTICS {
u32 Cnt_Parity_Fail;
u32 Cnt_Rate_Illegal;
u32 Cnt_Crc8_fail;
@@ -442,7 +442,7 @@ extern u8 MCS_FILTER_1SS[16];
#define IS_11N_MCS_RATE(rate) (rate&0x80)
-typedef enum _HT_AGGRE_SIZE{
+typedef enum _HT_AGGRE_SIZE {
HT_AGG_SIZE_8K = 0,
HT_AGG_SIZE_16K = 1,
HT_AGG_SIZE_32K = 2,
@@ -464,7 +464,7 @@ typedef enum _HT_IOT_PEER
//
// IOT Action for different AP
//
-typedef enum _HT_IOT_ACTION{
+typedef enum _HT_IOT_ACTION {
HT_IOT_ACT_TX_USE_AMSDU_4K = 0x00000001,
HT_IOT_ACT_TX_USE_AMSDU_8K = 0x00000002,
HT_IOT_ACT_DISABLE_MCS14 = 0x00000004,
--
2.7.4
Powered by blists - more mailing lists