[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1487268237-4240-3-git-send-email-bgolaszewski@baylibre.com>
Date: Thu, 16 Feb 2017 19:03:57 +0100
From: Bartosz Golaszewski <bgolaszewski@...libre.com>
To: Sekhar Nori <nsekhar@...com>, David Lechner <david@...hnology.com>,
Kevin Hilman <khilman@...libre.com>,
Michael Turquette <mturquette@...libre.com>,
Patrick Titiano <ptitiano@...libre.com>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org,
Bartosz Golaszewski <bgolaszewski@...libre.com>
Subject: [PATCH 2/2] media: dt-bindings: vpif: extend the example with an output port
This makes the example more or less correspond with the da850-evm
hardware setup.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@...libre.com>
---
.../devicetree/bindings/media/ti,da850-vpif.txt | 36 +++++++++++++++++-----
1 file changed, 29 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/ti,da850-vpif.txt b/Documentation/devicetree/bindings/media/ti,da850-vpif.txt
index 9c7510b..d6f93a1 100644
--- a/Documentation/devicetree/bindings/media/ti,da850-vpif.txt
+++ b/Documentation/devicetree/bindings/media/ti,da850-vpif.txt
@@ -16,7 +16,7 @@ Required properties:
Video Capture:
VPIF has a 16-bit parallel bus input, supporting 2 8-bit channels or a
-single 16-bit channel. It should contain at least one port child node
+single 16-bit channel. It should contain one or two port child nodes
with child 'endpoint' node. Please refer to the bindings defined in
Documentation/devicetree/bindings/media/video-interfaces.txt.
@@ -28,19 +28,26 @@ I2C-connected TVP5147 decoder:
reg = <0x217000 0x1000>;
interrupts = <92>;
- port {
- vpif_ch0: endpoint@0 {
+ port@0 {
+ vpif_input_ch0: endpoint@0 {
reg = <0>;
bus-width = <8>;
- remote-endpoint = <&composite>;
+ remote-endpoint = <&composite_in>;
};
- vpif_ch1: endpoint@1 {
+ vpif_input_ch1: endpoint@1 {
reg = <1>;
bus-width = <8>;
data-shift = <8>;
};
};
+
+ port@1 {
+ vpif_output_ch0: endpoint {
+ bus-width = <8>;
+ remote-endpoint = <&composite_out>;
+ };
+ };
};
[ ... ]
@@ -53,13 +60,28 @@ I2C-connected TVP5147 decoder:
status = "okay";
port {
- composite: endpoint {
+ composite_in: endpoint {
hsync-active = <1>;
vsync-active = <1>;
pclk-sample = <0>;
/* VPIF channel 0 (lower 8-bits) */
- remote-endpoint = <&vpif_ch0>;
+ remote-endpoint = <&vpif_input_ch0>;
+ bus-width = <8>;
+ };
+ };
+ };
+
+ adv7343@2a {
+ compatible = "adi,adv7343";
+ reg = <0x2a>;
+
+ port {
+ composite_out: endpoint {
+ adi,dac-enable = <1 1 1>;
+ adi,sd-dac-enable = <1>;
+
+ remote-endpoint = <&vpif_output_ch0>;
bus-width = <8>;
};
};
--
2.9.3
Powered by blists - more mailing lists