| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <lsq.1487198500.897433201@decadent.org.uk>
Date: Wed, 15 Feb 2017 22:41:40 +0000
From: Ben Hutchings <ben@...adent.org.uk>
To: linux-kernel@...r.kernel.org, stable@...r.kernel.org
CC: akpm@...ux-foundation.org,
"Srinivas Pandruvada" <srinivas.pandruvada@...ux.intel.com>,
"Jonathan Cameron" <jic23@...nel.org>,
"Song Hongyan" <hongyan.song@...el.com>
Subject: [PATCH 3.16 208/306] iio: hid-sensors: Increase the precision of
scale to fix wrong reading interpretation.
3.16.40-rc1 review patch. If anyone has any objections, please let me know.
------------------
From: Song Hongyan <hongyan.song@...el.com>
commit 6f77199e9e4b84340c751c585691d7642a47d226 upstream.
While testing, it was observed that on some platforms the scale value
from iio sysfs for gyroscope is always 0 (E.g. Yoga 260). This results
in the final angular velocity component values to be zeros.
This is caused by insufficient precision of scale value displayed in sysfs.
If the precision is changed to nano from current micro, then this is
sufficient to display the scale value on this platform.
Since this can be a problem for all other HID sensors, increase scale
precision of all HID sensors to nano from current micro.
Results on Yoga 260:
name scale before scale now
--------------------------------------------
gyro_3d 0.000000 0.000000174
als 0.001000 0.001000000
magn_3d 0.000001 0.000001000
accel_3d 0.000009 0.000009806
Signed-off-by: Song Hongyan <hongyan.song@...el.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@...ux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@...nel.org>
Signed-off-by: Ben Hutchings <ben@...adent.org.uk>
---
.../iio/common/hid-sensors/hid-sensor-attributes.c | 56 +++++++++++-----------
1 file changed, 28 insertions(+), 28 deletions(-)
--- a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
+++ b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
@@ -30,26 +30,26 @@ static struct {
u32 usage_id;
int unit; /* 0 for default others from HID sensor spec */
int scale_val0; /* scale, whole number */
- int scale_val1; /* scale, fraction in micros */
+ int scale_val1; /* scale, fraction in nanos */
} unit_conversion[] = {
- {HID_USAGE_SENSOR_ACCEL_3D, 0, 9, 806650},
+ {HID_USAGE_SENSOR_ACCEL_3D, 0, 9, 806650000},
{HID_USAGE_SENSOR_ACCEL_3D,
HID_USAGE_SENSOR_UNITS_METERS_PER_SEC_SQRD, 1, 0},
{HID_USAGE_SENSOR_ACCEL_3D,
- HID_USAGE_SENSOR_UNITS_G, 9, 806650},
+ HID_USAGE_SENSOR_UNITS_G, 9, 806650000},
- {HID_USAGE_SENSOR_GYRO_3D, 0, 0, 17453},
+ {HID_USAGE_SENSOR_GYRO_3D, 0, 0, 17453293},
{HID_USAGE_SENSOR_GYRO_3D,
HID_USAGE_SENSOR_UNITS_RADIANS_PER_SECOND, 1, 0},
{HID_USAGE_SENSOR_GYRO_3D,
- HID_USAGE_SENSOR_UNITS_DEGREES_PER_SECOND, 0, 17453},
+ HID_USAGE_SENSOR_UNITS_DEGREES_PER_SECOND, 0, 17453293},
- {HID_USAGE_SENSOR_COMPASS_3D, 0, 0, 1000},
+ {HID_USAGE_SENSOR_COMPASS_3D, 0, 0, 1000000},
{HID_USAGE_SENSOR_COMPASS_3D, HID_USAGE_SENSOR_UNITS_GAUSS, 1, 0},
- {HID_USAGE_SENSOR_INCLINOMETER_3D, 0, 0, 17453},
+ {HID_USAGE_SENSOR_INCLINOMETER_3D, 0, 0, 17453293},
{HID_USAGE_SENSOR_INCLINOMETER_3D,
- HID_USAGE_SENSOR_UNITS_DEGREES, 0, 17453},
+ HID_USAGE_SENSOR_UNITS_DEGREES, 0, 17453293},
{HID_USAGE_SENSOR_INCLINOMETER_3D,
HID_USAGE_SENSOR_UNITS_RADIANS, 1, 0},
@@ -57,7 +57,7 @@ static struct {
{HID_USAGE_SENSOR_ALS, HID_USAGE_SENSOR_UNITS_LUX, 1, 0},
{HID_USAGE_SENSOR_PRESSURE, 0, 100, 0},
- {HID_USAGE_SENSOR_PRESSURE, HID_USAGE_SENSOR_UNITS_PASCAL, 0, 1000},
+ {HID_USAGE_SENSOR_PRESSURE, HID_USAGE_SENSOR_UNITS_PASCAL, 0, 1000000},
};
static int pow_10(unsigned power)
@@ -266,15 +266,15 @@ EXPORT_SYMBOL(hid_sensor_write_raw_hyst_
/*
* This fuction applies the unit exponent to the scale.
* For example:
- * 9.806650 ->exp:2-> val0[980]val1[665000]
- * 9.000806 ->exp:2-> val0[900]val1[80600]
- * 0.174535 ->exp:2-> val0[17]val1[453500]
- * 1.001745 ->exp:0-> val0[1]val1[1745]
- * 1.001745 ->exp:2-> val0[100]val1[174500]
- * 1.001745 ->exp:4-> val0[10017]val1[450000]
- * 9.806650 ->exp:-2-> val0[0]val1[98066]
+ * 9.806650000 ->exp:2-> val0[980]val1[665000000]
+ * 9.000806000 ->exp:2-> val0[900]val1[80600000]
+ * 0.174535293 ->exp:2-> val0[17]val1[453529300]
+ * 1.001745329 ->exp:0-> val0[1]val1[1745329]
+ * 1.001745329 ->exp:2-> val0[100]val1[174532900]
+ * 1.001745329 ->exp:4-> val0[10017]val1[453290000]
+ * 9.806650000 ->exp:-2-> val0[0]val1[98066500]
*/
-static void adjust_exponent_micro(int *val0, int *val1, int scale0,
+static void adjust_exponent_nano(int *val0, int *val1, int scale0,
int scale1, int exp)
{
int i;
@@ -285,32 +285,32 @@ static void adjust_exponent_micro(int *v
if (exp > 0) {
*val0 = scale0 * pow_10(exp);
res = 0;
- if (exp > 6) {
+ if (exp > 9) {
*val1 = 0;
return;
}
for (i = 0; i < exp; ++i) {
- x = scale1 / pow_10(5 - i);
+ x = scale1 / pow_10(8 - i);
res += (pow_10(exp - 1 - i) * x);
- scale1 = scale1 % pow_10(5 - i);
+ scale1 = scale1 % pow_10(8 - i);
}
*val0 += res;
*val1 = scale1 * pow_10(exp);
} else if (exp < 0) {
exp = abs(exp);
- if (exp > 6) {
+ if (exp > 9) {
*val0 = *val1 = 0;
return;
}
*val0 = scale0 / pow_10(exp);
rem = scale0 % pow_10(exp);
res = 0;
- for (i = 0; i < (6 - exp); ++i) {
- x = scale1 / pow_10(5 - i);
- res += (pow_10(5 - exp - i) * x);
- scale1 = scale1 % pow_10(5 - i);
+ for (i = 0; i < (9 - exp); ++i) {
+ x = scale1 / pow_10(8 - i);
+ res += (pow_10(8 - exp - i) * x);
+ scale1 = scale1 % pow_10(8 - i);
}
- *val1 = rem * pow_10(6 - exp) + res;
+ *val1 = rem * pow_10(9 - exp) + res;
} else {
*val0 = scale0;
*val1 = scale1;
@@ -332,14 +332,14 @@ int hid_sensor_format_scale(u32 usage_id
unit_conversion[i].unit == attr_info->units) {
exp = hid_sensor_convert_exponent(
attr_info->unit_expo);
- adjust_exponent_micro(val0, val1,
+ adjust_exponent_nano(val0, val1,
unit_conversion[i].scale_val0,
unit_conversion[i].scale_val1, exp);
break;
}
}
- return IIO_VAL_INT_PLUS_MICRO;
+ return IIO_VAL_INT_PLUS_NANO;
}
EXPORT_SYMBOL(hid_sensor_format_scale);
Powered by blists - more mailing lists