| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <jpgwpcp8x17.fsf@linux.bootlegged.copy>
Date: Thu, 16 Feb 2017 19:45:56 -0500
From: Bandan Das <bsd@...hat.com>
To: Paolo Bonzini <pbonzini@...hat.com>
Cc: linux-kernel@...r.kernel.org, kvm@...r.kernel.org
Subject: Re: [PATCH] KVM: x86: remove code for lazy FPU handling
Paolo Bonzini <pbonzini@...hat.com> writes:
> The FPU is always active now when running KVM.
The lazy code was a performance optimization, correct ?
Is this just dormant code and being removed ? Maybe
mentioning the reasoning in a little more detail is a good
idea.
The removal itself looks clean. I was really hoping that you
would have forgotten removing "fpu_active" from struct kvm_vcpu()
but you hadn't ;)
Bandan
> Signed-off-by: Paolo Bonzini <pbonzini@...hat.com>
> ---
> arch/x86/include/asm/kvm_host.h | 3 --
> arch/x86/kvm/cpuid.c | 2 -
> arch/x86/kvm/svm.c | 43 ++-------------
> arch/x86/kvm/vmx.c | 112 ++++++----------------------------------
> arch/x86/kvm/x86.c | 7 +--
> include/linux/kvm_host.h | 1 -
> 6 files changed, 19 insertions(+), 149 deletions(-)
>
> diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
> index e4f13e714bcf..74ef58c8ff53 100644
> --- a/arch/x86/include/asm/kvm_host.h
> +++ b/arch/x86/include/asm/kvm_host.h
> @@ -55,7 +55,6 @@
> #define KVM_REQ_TRIPLE_FAULT 10
> #define KVM_REQ_MMU_SYNC 11
> #define KVM_REQ_CLOCK_UPDATE 12
> -#define KVM_REQ_DEACTIVATE_FPU 13
> #define KVM_REQ_EVENT 14
> #define KVM_REQ_APF_HALT 15
> #define KVM_REQ_STEAL_UPDATE 16
> @@ -936,8 +935,6 @@ struct kvm_x86_ops {
> unsigned long (*get_rflags)(struct kvm_vcpu *vcpu);
> void (*set_rflags)(struct kvm_vcpu *vcpu, unsigned long rflags);
> u32 (*get_pkru)(struct kvm_vcpu *vcpu);
> - void (*fpu_activate)(struct kvm_vcpu *vcpu);
> - void (*fpu_deactivate)(struct kvm_vcpu *vcpu);
>
> void (*tlb_flush)(struct kvm_vcpu *vcpu);
>
> diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c
> index c0e2036217ad..1d155cc56629 100644
> --- a/arch/x86/kvm/cpuid.c
> +++ b/arch/x86/kvm/cpuid.c
> @@ -123,8 +123,6 @@ int kvm_update_cpuid(struct kvm_vcpu *vcpu)
> if (best && (best->eax & (F(XSAVES) | F(XSAVEC))))
> best->ebx = xstate_required_size(vcpu->arch.xcr0, true);
>
> - kvm_x86_ops->fpu_activate(vcpu);
> -
> /*
> * The existing code assumes virtual address is 48-bit in the canonical
> * address checks; exit if it is ever changed.
> diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
> index 4e5905a1ce70..d1efe2c62b3f 100644
> --- a/arch/x86/kvm/svm.c
> +++ b/arch/x86/kvm/svm.c
> @@ -1157,7 +1157,6 @@ static void init_vmcb(struct vcpu_svm *svm)
> struct vmcb_control_area *control = &svm->vmcb->control;
> struct vmcb_save_area *save = &svm->vmcb->save;
>
> - svm->vcpu.fpu_active = 1;
> svm->vcpu.arch.hflags = 0;
>
> set_cr_intercept(svm, INTERCEPT_CR0_READ);
> @@ -1899,15 +1898,12 @@ static void update_cr0_intercept(struct vcpu_svm *svm)
> ulong gcr0 = svm->vcpu.arch.cr0;
> u64 *hcr0 = &svm->vmcb->save.cr0;
>
> - if (!svm->vcpu.fpu_active)
> - *hcr0 |= SVM_CR0_SELECTIVE_MASK;
> - else
> - *hcr0 = (*hcr0 & ~SVM_CR0_SELECTIVE_MASK)
> - | (gcr0 & SVM_CR0_SELECTIVE_MASK);
> + *hcr0 = (*hcr0 & ~SVM_CR0_SELECTIVE_MASK)
> + | (gcr0 & SVM_CR0_SELECTIVE_MASK);
>
> mark_dirty(svm->vmcb, VMCB_CR);
>
> - if (gcr0 == *hcr0 && svm->vcpu.fpu_active) {
> + if (gcr0 == *hcr0) {
> clr_cr_intercept(svm, INTERCEPT_CR0_READ);
> clr_cr_intercept(svm, INTERCEPT_CR0_WRITE);
> } else {
> @@ -1938,8 +1934,6 @@ static void svm_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
> if (!npt_enabled)
> cr0 |= X86_CR0_PG | X86_CR0_WP;
>
> - if (!vcpu->fpu_active)
> - cr0 |= X86_CR0_TS;
> /*
> * re-enable caching here because the QEMU bios
> * does not do it - this results in some delay at
> @@ -2158,22 +2152,6 @@ static int ac_interception(struct vcpu_svm *svm)
> return 1;
> }
>
> -static void svm_fpu_activate(struct kvm_vcpu *vcpu)
> -{
> - struct vcpu_svm *svm = to_svm(vcpu);
> -
> - clr_exception_intercept(svm, NM_VECTOR);
> -
> - svm->vcpu.fpu_active = 1;
> - update_cr0_intercept(svm);
> -}
> -
> -static int nm_interception(struct vcpu_svm *svm)
> -{
> - svm_fpu_activate(&svm->vcpu);
> - return 1;
> -}
> -
> static bool is_erratum_383(void)
> {
> int err, i;
> @@ -2571,9 +2549,6 @@ static int nested_svm_exit_special(struct vcpu_svm *svm)
> if (!npt_enabled && svm->apf_reason == 0)
> return NESTED_EXIT_HOST;
> break;
> - case SVM_EXIT_EXCP_BASE + NM_VECTOR:
> - nm_interception(svm);
> - break;
> default:
> break;
> }
> @@ -4018,7 +3993,6 @@ static int (*const svm_exit_handlers[])(struct vcpu_svm *svm) = {
> [SVM_EXIT_EXCP_BASE + BP_VECTOR] = bp_interception,
> [SVM_EXIT_EXCP_BASE + UD_VECTOR] = ud_interception,
> [SVM_EXIT_EXCP_BASE + PF_VECTOR] = pf_interception,
> - [SVM_EXIT_EXCP_BASE + NM_VECTOR] = nm_interception,
> [SVM_EXIT_EXCP_BASE + MC_VECTOR] = mc_interception,
> [SVM_EXIT_EXCP_BASE + AC_VECTOR] = ac_interception,
> [SVM_EXIT_INTR] = intr_interception,
> @@ -5072,14 +5046,6 @@ static bool svm_has_wbinvd_exit(void)
> return true;
> }
>
> -static void svm_fpu_deactivate(struct kvm_vcpu *vcpu)
> -{
> - struct vcpu_svm *svm = to_svm(vcpu);
> -
> - set_exception_intercept(svm, NM_VECTOR);
> - update_cr0_intercept(svm);
> -}
> -
> #define PRE_EX(exit) { .exit_code = (exit), \
> .stage = X86_ICPT_PRE_EXCEPT, }
> #define POST_EX(exit) { .exit_code = (exit), \
> @@ -5340,9 +5306,6 @@ static inline void avic_post_state_restore(struct kvm_vcpu *vcpu)
>
> .get_pkru = svm_get_pkru,
>
> - .fpu_activate = svm_fpu_activate,
> - .fpu_deactivate = svm_fpu_deactivate,
> -
> .tlb_flush = svm_flush_tlb,
>
> .run = svm_vcpu_run,
> diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
> index 0e0b5d09597e..9856b73a21ad 100644
> --- a/arch/x86/kvm/vmx.c
> +++ b/arch/x86/kvm/vmx.c
> @@ -1856,7 +1856,7 @@ static void update_exception_bitmap(struct kvm_vcpu *vcpu)
> u32 eb;
>
> eb = (1u << PF_VECTOR) | (1u << UD_VECTOR) | (1u << MC_VECTOR) |
> - (1u << NM_VECTOR) | (1u << DB_VECTOR) | (1u << AC_VECTOR);
> + (1u << DB_VECTOR) | (1u << AC_VECTOR);
> if ((vcpu->guest_debug &
> (KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_USE_SW_BP)) ==
> (KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_USE_SW_BP))
> @@ -1865,8 +1865,6 @@ static void update_exception_bitmap(struct kvm_vcpu *vcpu)
> eb = ~0;
> if (enable_ept)
> eb &= ~(1u << PF_VECTOR); /* bypass_guest_pf = 0 */
> - if (vcpu->fpu_active)
> - eb &= ~(1u << NM_VECTOR);
>
> /* When we are running a nested L2 guest and L1 specified for it a
> * certain exception bitmap, we must trap the same exceptions and pass
> @@ -2340,25 +2338,6 @@ static void vmx_vcpu_put(struct kvm_vcpu *vcpu)
> }
> }
>
> -static void vmx_fpu_activate(struct kvm_vcpu *vcpu)
> -{
> - ulong cr0;
> -
> - if (vcpu->fpu_active)
> - return;
> - vcpu->fpu_active = 1;
> - cr0 = vmcs_readl(GUEST_CR0);
> - cr0 &= ~(X86_CR0_TS | X86_CR0_MP);
> - cr0 |= kvm_read_cr0_bits(vcpu, X86_CR0_TS | X86_CR0_MP);
> - vmcs_writel(GUEST_CR0, cr0);
> - update_exception_bitmap(vcpu);
> - vcpu->arch.cr0_guest_owned_bits = X86_CR0_TS;
> - if (is_guest_mode(vcpu))
> - vcpu->arch.cr0_guest_owned_bits &=
> - ~get_vmcs12(vcpu)->cr0_guest_host_mask;
> - vmcs_writel(CR0_GUEST_HOST_MASK, ~vcpu->arch.cr0_guest_owned_bits);
> -}
> -
> static void vmx_decache_cr0_guest_bits(struct kvm_vcpu *vcpu);
>
> /*
> @@ -2377,33 +2356,6 @@ static inline unsigned long nested_read_cr4(struct vmcs12 *fields)
> (fields->cr4_read_shadow & fields->cr4_guest_host_mask);
> }
>
> -static void vmx_fpu_deactivate(struct kvm_vcpu *vcpu)
> -{
> - /* Note that there is no vcpu->fpu_active = 0 here. The caller must
> - * set this *before* calling this function.
> - */
> - vmx_decache_cr0_guest_bits(vcpu);
> - vmcs_set_bits(GUEST_CR0, X86_CR0_TS | X86_CR0_MP);
> - update_exception_bitmap(vcpu);
> - vcpu->arch.cr0_guest_owned_bits = 0;
> - vmcs_writel(CR0_GUEST_HOST_MASK, ~vcpu->arch.cr0_guest_owned_bits);
> - if (is_guest_mode(vcpu)) {
> - /*
> - * L1's specified read shadow might not contain the TS bit,
> - * so now that we turned on shadowing of this bit, we need to
> - * set this bit of the shadow. Like in nested_vmx_run we need
> - * nested_read_cr0(vmcs12), but vmcs12->guest_cr0 is not yet
> - * up-to-date here because we just decached cr0.TS (and we'll
> - * only update vmcs12->guest_cr0 on nested exit).
> - */
> - struct vmcs12 *vmcs12 = get_vmcs12(vcpu);
> - vmcs12->guest_cr0 = (vmcs12->guest_cr0 & ~X86_CR0_TS) |
> - (vcpu->arch.cr0 & X86_CR0_TS);
> - vmcs_writel(CR0_READ_SHADOW, nested_read_cr0(vmcs12));
> - } else
> - vmcs_writel(CR0_READ_SHADOW, vcpu->arch.cr0);
> -}
> -
> static unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu)
> {
> unsigned long rflags, save_rflags;
> @@ -4232,9 +4184,6 @@ static void vmx_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
> if (enable_ept)
> ept_update_paging_mode_cr0(&hw_cr0, cr0, vcpu);
>
> - if (!vcpu->fpu_active)
> - hw_cr0 |= X86_CR0_TS | X86_CR0_MP;
> -
> vmcs_writel(CR0_READ_SHADOW, cr0);
> vmcs_writel(GUEST_CR0, hw_cr0);
> vcpu->arch.cr0 = cr0;
> @@ -5321,7 +5270,9 @@ static int vmx_vcpu_setup(struct vcpu_vmx *vmx)
> /* 22.2.1, 20.8.1 */
> vm_entry_controls_init(vmx, vmcs_config.vmentry_ctrl);
>
> - vmcs_writel(CR0_GUEST_HOST_MASK, ~0UL);
> + vmx->vcpu.arch.cr0_guest_owned_bits = X86_CR0_TS;
> + vmcs_writel(CR0_GUEST_HOST_MASK, ~X86_CR0_TS);
> +
> set_cr4_guest_host_mask(vmx);
>
> if (vmx_xsaves_supported())
> @@ -5425,7 +5376,7 @@ static void vmx_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event)
> vmx_set_cr0(vcpu, cr0); /* enter rmode */
> vmx_set_cr4(vcpu, 0);
> vmx_set_efer(vcpu, 0);
> - vmx_fpu_activate(vcpu);
> +
> update_exception_bitmap(vcpu);
>
> vpid_sync_context(vmx->vpid);
> @@ -5698,11 +5649,6 @@ static int handle_exception(struct kvm_vcpu *vcpu)
> if (is_nmi(intr_info))
> return 1; /* already handled by vmx_vcpu_run() */
>
> - if (is_no_device(intr_info)) {
> - vmx_fpu_activate(vcpu);
> - return 1;
> - }
> -
> if (is_invalid_opcode(intr_info)) {
> if (is_guest_mode(vcpu)) {
> kvm_queue_exception(vcpu, UD_VECTOR);
> @@ -5892,22 +5838,6 @@ static int handle_set_cr4(struct kvm_vcpu *vcpu, unsigned long val)
> return kvm_set_cr4(vcpu, val);
> }
>
> -/* called to set cr0 as appropriate for clts instruction exit. */
> -static void handle_clts(struct kvm_vcpu *vcpu)
> -{
> - if (is_guest_mode(vcpu)) {
> - /*
> - * We get here when L2 did CLTS, and L1 didn't shadow CR0.TS
> - * but we did (!fpu_active). We need to keep GUEST_CR0.TS on,
> - * just pretend it's off (also in arch.cr0 for fpu_activate).
> - */
> - vmcs_writel(CR0_READ_SHADOW,
> - vmcs_readl(CR0_READ_SHADOW) & ~X86_CR0_TS);
> - vcpu->arch.cr0 &= ~X86_CR0_TS;
> - } else
> - vmx_set_cr0(vcpu, kvm_read_cr0_bits(vcpu, ~X86_CR0_TS));
> -}
> -
> static int handle_cr(struct kvm_vcpu *vcpu)
> {
> unsigned long exit_qualification, val;
> @@ -5953,9 +5883,9 @@ static int handle_cr(struct kvm_vcpu *vcpu)
> }
> break;
> case 2: /* clts */
> - handle_clts(vcpu);
> + WARN_ONCE(1, "Guest should always own CR0.TS");
> + vmx_set_cr0(vcpu, kvm_read_cr0_bits(vcpu, ~X86_CR0_TS));
> trace_kvm_cr_write(0, kvm_read_cr0(vcpu));
> - vmx_fpu_activate(vcpu);
> return kvm_skip_emulated_instruction(vcpu);
> case 1: /*mov from cr*/
> switch (cr) {
> @@ -10349,8 +10279,8 @@ static int prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12,
> }
>
> /*
> - * This sets GUEST_CR0 to vmcs12->guest_cr0, with possibly a modified
> - * TS bit (for lazy fpu) and bits which we consider mandatory enabled.
> + * This sets GUEST_CR0 to vmcs12->guest_cr0, possibly modifying those
> + * bits which we consider mandatory enabled.
> * The CR0_READ_SHADOW is what L2 should have expected to read given
> * the specifications by L1; It's not enough to take
> * vmcs12->cr0_read_shadow because on our cr0_guest_host_mask we we
> @@ -10963,24 +10893,15 @@ static void load_vmcs12_host_state(struct kvm_vcpu *vcpu,
> vmx_set_rflags(vcpu, X86_EFLAGS_FIXED);
> /*
> * Note that calling vmx_set_cr0 is important, even if cr0 hasn't
> - * actually changed, because it depends on the current state of
> - * fpu_active (which may have changed).
> - * Note that vmx_set_cr0 refers to efer set above.
> + * actually changed, because vmx_set_cr0 refers to efer set above.
> + *
> + * CR0_GUEST_HOST_MASK is already set in the original vmcs01
> + * (KVM doesn't change it);
> */
> + vcpu->arch.cr0_guest_owned_bits = X86_CR0_TS;
> vmx_set_cr0(vcpu, vmcs12->host_cr0);
> - /*
> - * If we did fpu_activate()/fpu_deactivate() during L2's run, we need
> - * to apply the same changes to L1's vmcs. We just set cr0 correctly,
> - * but we also need to update cr0_guest_host_mask and exception_bitmap.
> - */
> - update_exception_bitmap(vcpu);
> - vcpu->arch.cr0_guest_owned_bits = (vcpu->fpu_active ? X86_CR0_TS : 0);
> - vmcs_writel(CR0_GUEST_HOST_MASK, ~vcpu->arch.cr0_guest_owned_bits);
>
> - /*
> - * Note that CR4_GUEST_HOST_MASK is already set in the original vmcs01
> - * (KVM doesn't change it)- no reason to call set_cr4_guest_host_mask();
> - */
> + /* Same as above - no reason to call set_cr4_guest_host_mask(). */
> vcpu->arch.cr4_guest_owned_bits = ~vmcs_readl(CR4_GUEST_HOST_MASK);
> kvm_set_cr4(vcpu, vmcs12->host_cr4);
>
> @@ -11609,9 +11530,6 @@ static void vmx_setup_mce(struct kvm_vcpu *vcpu)
>
> .get_pkru = vmx_get_pkru,
>
> - .fpu_activate = vmx_fpu_activate,
> - .fpu_deactivate = vmx_fpu_deactivate,
> -
> .tlb_flush = vmx_flush_tlb,
>
> .run = vmx_vcpu_run,
> diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
> index 8d3047c8cce7..c48404017e4f 100644
> --- a/arch/x86/kvm/x86.c
> +++ b/arch/x86/kvm/x86.c
> @@ -6751,10 +6751,6 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
> r = 0;
> goto out;
> }
> - if (kvm_check_request(KVM_REQ_DEACTIVATE_FPU, vcpu)) {
> - vcpu->fpu_active = 0;
> - kvm_x86_ops->fpu_deactivate(vcpu);
> - }
> if (kvm_check_request(KVM_REQ_APF_HALT, vcpu)) {
> /* Page is swapped out. Do synthetic halt */
> vcpu->arch.apf.halted = true;
> @@ -6856,8 +6852,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
> preempt_disable();
>
> kvm_x86_ops->prepare_guest_switch(vcpu);
> - if (vcpu->fpu_active)
> - kvm_load_guest_fpu(vcpu);
> + kvm_load_guest_fpu(vcpu);
>
> /*
> * Disable IRQs before setting IN_GUEST_MODE. Posted interrupt
> diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
> index 2db458ee94b0..8d69d5150748 100644
> --- a/include/linux/kvm_host.h
> +++ b/include/linux/kvm_host.h
> @@ -221,7 +221,6 @@ struct kvm_vcpu {
> struct mutex mutex;
> struct kvm_run *run;
>
> - int fpu_active;
> int guest_fpu_loaded, guest_xcr0_loaded;
> struct swait_queue_head wq;
> struct pid *pid;
Powered by blists - more mailing lists