| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1487582091-24695-3-git-send-email-xuejiancheng@hisilicon.com>
Date: Mon, 20 Feb 2017 17:14:51 +0800
From: Jiancheng Xue <xuejiancheng@...ilicon.com>
To: <xuwei5@...ilicon.com>, <linux@...linux.org.uk>,
<robh+dt@...nel.org>
CC: <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <xuejiancheng@...ilicon.com>,
<howell.yang@...ilicon.com>, <suwenping@...ilicon.com>,
<yanhaifeng@...ilicon.com>, Pan Wen <wenpan@...ilicon.com>
Subject: [PATCH v2 2/2] arm: dts: hisi: add dts files for Hi3516CV300 demo board
From: Pan Wen <wenpan@...ilicon.com>
Add dts files for Hi3516CV300 demo board.
Signed-off-by: Pan Wen <wenpan@...ilicon.com>
Signed-off-by: Jiancheng Xue <xuejiancheng@...ilicon.com>
---
ChangeLog:
1. removed i2c and pwm nodes because the drivers were not merged.
2. removed some unused alias and properties.
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/hi3516cv300-demb.dts | 95 +++++++++
arch/arm/boot/dts/hi3516cv300.dtsi | 362 +++++++++++++++++++++++++++++++++
3 files changed, 458 insertions(+)
create mode 100644 arch/arm/boot/dts/hi3516cv300-demb.dts
create mode 100644 arch/arm/boot/dts/hi3516cv300.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 01d178a..69497ad 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -178,6 +178,7 @@ dtb-$(CONFIG_ARCH_HIP01) += \
dtb-$(CONFIG_ARCH_HIP04) += \
hip04-d01.dtb
dtb-$(CONFIG_ARCH_HISI) += \
+ hi3516cv300-demb.dtb \
hi3519-demb.dtb
dtb-$(CONFIG_ARCH_HIX5HD2) += \
hisi-x5hd2-dkb.dtb
diff --git a/arch/arm/boot/dts/hi3516cv300-demb.dts b/arch/arm/boot/dts/hi3516cv300-demb.dts
new file mode 100644
index 0000000..b0e980b
--- /dev/null
+++ b/arch/arm/boot/dts/hi3516cv300-demb.dts
@@ -0,0 +1,95 @@
+/*
+ * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+
+/dts-v1/;
+#include "hi3516cv300.dtsi"
+
+/ {
+ model = "Hisilicon Hi3516CV300 DEMO Board";
+ compatible = "hisilicon,hi3516cv300-demb", "hisilicon,hi3516cv300";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>;
+ };
+};
+
+&dual_timer0 {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&spi_bus1 {
+ status = "okay";
+ num-cs = <2>;
+ cs-gpios = <&gpio_chip5 3 0>, <&gpio_chip5 4 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pmux>;
+};
+
+&fmc {
+ spi-nor@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <160000000>;
+ m25p,fast-read;
+ };
+};
+
+&mdio {
+ phy0: phy@1 {
+ reg = <1>;
+ };
+};
+
+&hisi_femac {
+ phy-mode = "rmii";
+ phy-handle = <&phy0>;
+ hisilicon,phy-reset-delays-us = <10000 10000 150000>;
+};
+
+&dmac {
+ status = "okay";
+};
+
+&pmux {
+ spi1_pmux: spi1_pmux {
+ pinctrl-single,pins = <
+ 0xc4 0x1
+ 0xc8 0x1
+ 0xcc 0x1
+ 0xd0 0x1
+ 0xd4 0x1>;
+ };
+};
diff --git a/arch/arm/boot/dts/hi3516cv300.dtsi b/arch/arm/boot/dts/hi3516cv300.dtsi
new file mode 100644
index 0000000..5132cfe
--- /dev/null
+++ b/arch/arm/boot/dts/hi3516cv300.dtsi
@@ -0,0 +1,362 @@
+/*
+ * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include <dt-bindings/clock/hi3516cv300-clock.h>
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,arm926ej-s";
+ device_type = "cpu";
+ reg = <0>;
+ };
+ };
+
+ vic: interrupt-controller@...40000 {
+ compatible = "arm,pl190-vic";
+ reg = <0x10040000 0x1000>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&vic>;
+ ranges;
+
+ clk_3m: clk_3m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <3000000>;
+ };
+
+ clk_apb: clk_apb {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+
+ crg: clock-reset-controller@...10000 {
+ compatible = "hisilicon,hi3516cv300-crg";
+ reg = <0x12010000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <2>;
+ };
+
+ sysctrl: system-controller@...20000 {
+ compatible = "hisilicon,hi3516cv300-sysctrl", "syscon";
+ reg = <0x12020000 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ reboot {
+ compatible = "syscon-reboot";
+ regmap = <&sysctrl>;
+ offset = <0x4>;
+ mask = <0xdeadbeef>;
+ };
+
+ dual_timer0: dual_timer@...00000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x12000000 0x1000>;
+ interrupts = <3>;
+ clocks = <&clk_3m>, <&clk_3m>, <&clk_apb>;
+ clock-names = "timer0", "timer1", "apb_pclk";
+ status = "disabled";
+ };
+
+ dual_timer1: dual_timer@...01000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x12001000 0x1000>;
+ interrupts = <4>;
+ clocks = <&clk_3m>, <&clk_3m>, <&clk_apb>;
+ clock-names = "timer0", "timer1", "apb_pclk";
+ status = "disabled";
+ };
+
+ watchdog: watchdog@...80000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ arm,primecell-periphid = <0x00141805>;
+ reg = <0x12080000 0x1000>;
+ clocks = <&sysctrl HI3516CV300_WDT_CLK>,
+ <&crg HI3516CV300_APB_CLK>;
+ clock-names = "wdog_clk", "apb_pclk";
+ status = "disabled";
+ };
+
+ uart0: uart@...00000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x12100000 0x1000>;
+ interrupts = <5>;
+ clocks = <&crg HI3516CV300_UART0_CLK>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ uart1: uart@...01000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x12101000 0x1000>;
+ interrupts = <30>;
+ clocks = <&crg HI3516CV300_UART1_CLK>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ uart2: uart@...02000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x12102000 0x1000>;
+ interrupts = <25>;
+ clocks = <&crg HI3516CV300_UART2_CLK>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ spi_bus0: spi@...20000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x12120000 0x1000>;
+ interrupts = <6>;
+ clocks = <&crg HI3516CV300_SPI0_CLK>;
+ clock-names = "apb_pclk";
+ dmas = <&dmac 12 1>, <&dmac 13 2>;
+ dma-names = "rx", "tx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi_bus1: spi@...21000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x12121000 0x1000>, <0x12030000 0x4>;
+ interrupts = <7>;
+ clocks = <&crg HI3516CV300_SPI1_CLK>;
+ clock-names = "apb_pclk";
+ dmas = <&dmac 14 1>, <&dmac 15 2>;
+ dma-names = "rx", "tx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ fmc: spi-nor-controller@...00000 {
+ compatible = "hisilicon,fmc-spi-nor";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x10000000 0x1000>, <0x14000000 0x1000000>;
+ reg-names = "control", "memory";
+ clocks = <&crg HI3516CV300_FMC_CLK>;
+ assigned-clocks = <&crg HI3516CV300_FMC_CLK>;
+ assigned-clock-rates = <24000000>;
+ };
+
+ mdio: mdio@...51100 {
+ compatible = "hisilicon,hisi-femac-mdio";
+ reg = <0x10051100 0x10>;
+ clocks = <&crg HI3516CV300_ETH_CLK>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ hisi_femac: ethernet@...90000 {
+ compatible = "hisilicon,hi3516cv300-femac",
+ "hisilicon,hisi-femac-v2";
+ reg = <0x10050000 0x1000>,<0x10051300 0x200>;
+ interrupts = <12>;
+ clocks = <&crg HI3516CV300_ETH_CLK>;
+ resets = <&crg 0xec 0>, <&crg 0xec 3>;
+ reset-names = "mac","phy";
+ };
+
+ dmac: dma-controller@...30000 {
+ compatible = "arm,pl080", "arm,primecell";
+ reg = <0x10030000 0x1000>;
+ interrupts = <14>;
+ clocks = <&crg HI3516CV300_DMAC_CLK>;
+ clock-names = "apb_pclk";
+ lli-bus-interface-ahb1;
+ lli-bus-interface-ahb2;
+ mem-bus-interface-ahb1;
+ mem-bus-interface-ahb2;
+ memcpy-burst-size = <256>;
+ memcpy-bus-width = <32>;
+ #dma-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio_chip0: gpio@...40000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x12140000 0x1000>;
+ interrupts = <31>;
+ clocks = <&crg HI3516CV300_APB_CLK>;
+ clock-names = "apb_pclk";
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmux 0 61 2>,
+ <&pmux 4 11 1>,
+ <&pmux 5 10 1>,
+ <&pmux 6 13 2>;
+
+ status = "disabled";
+ };
+
+ gpio_chip1: gpio@...41000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x12141000 0x1000>;
+ interrupts = <31>;
+ clocks = <&crg HI3516CV300_APB_CLK>;
+ clock-names = "apb_pclk";
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmux 0 16 7>,
+ <&pmux 7 0 1>;
+ status = "disabled";
+ };
+
+ gpio_chip2: gpio@...42000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x12142000 0x1000>;
+ interrupts = <31>;
+ clocks = <&crg HI3516CV300_APB_CLK>;
+ clock-names = "apb_pclk";
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmux 0 46 1>,
+ <&pmux 1 45 1>,
+ <&pmux 2 44 1>,
+ <&pmux 3 43 1>,
+ <&pmux 4 39 1>,
+ <&pmux 5 38 1>,
+ <&pmux 6 40 1>,
+ <&pmux 7 48 1>;
+ status = "disabled";
+ };
+
+ gpio_chip3: gpio@...43000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x12143000 0x1000>;
+ interrupts = <31>;
+ clocks = <&crg HI3516CV300_APB_CLK>;
+ clock-names = "apb_pclk";
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmux 0 37 1>,
+ <&pmux 1 36 1>,
+ <&pmux 2 35 1>,
+ <&pmux 3 34 1>,
+ <&pmux 4 23 2>,
+ <&pmux 6 8 2>;
+ status = "disabled";
+ };
+
+ gpio_chip4: gpio@...44000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x12144000 0x1000>;
+ interrupts = <31>;
+ clocks = <&crg HI3516CV300_APB_CLK>;
+ clock-names = "apb_pclk";
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmux 0 27 1>,
+ <&pmux 1 26 1>,
+ <&pmux 2 31 1>,
+ <&pmux 3 30 1>,
+ <&pmux 4 28 2>,
+ <&pmux 6 33 1>,
+ <&pmux 7 32 1>;
+ status = "disabled";
+ };
+
+ gpio_chip5: gpio@...45000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x12145000 0x1000>;
+ interrupts = <31>;
+ clocks = <&crg HI3516CV300_APB_CLK>;
+ clock-names = "apb_pclk";
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmux 0 53 1>,
+ <&pmux 1 51 2>,
+ <&pmux 3 50 1>,
+ <&pmux 4 49 1>,
+ <&pmux 5 47 1>,
+ <&pmux 6 40 2>;
+ status = "disabled";
+ };
+
+ gpio_chip6: gpio@...46000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x12146000 0x1000>;
+ interrupts = <31>;
+ clocks = <&crg HI3516CV300_APB_CLK>;
+ clock-names = "apb_pclk";
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmux 0 7 1>,
+ <&pmux 1 6 1>,
+ <&pmux 2 4 1>,
+ <&pmux 3 5 1>,
+ <&pmux 4 15 1>,
+ <&pmux 5 1 3>;
+ status = "disabled";
+ };
+
+ gpio_chip7: gpio@...47000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x12147000 0x1000>;
+ interrupts = <31>;
+ clocks = <&crg HI3516CV300_APB_CLK>;
+ clock-names = "apb_pclk";
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmux 1 55 6>,
+ <&pmux 7 25 1>;
+ status = "disabled";
+ };
+
+ gpio_chip8: gpio@...48000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x12148000 0x1000>;
+ interrupts = <31>;
+ clocks = <&crg HI3516CV300_APB_CLK>;
+ clock-names = "apb_pclk";
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmux 0 63 3>,
+ <&pmux 3 12 1>;
+ status = "disabled";
+ };
+
+ pmux: pinmux@...40000 {
+ compatible = "pinctrl-single";
+ reg = <0x12040000 0x108>;
+ #gpio-range-cells = <3>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <7>;
+ pinctrl-single,gpio-range = <&range 0 54 0
+ &range 55 6 1
+ &range 61 5 0>;
+
+ range: gpio-range {
+ #pinctrl-single,gpio-range-cells = <3>;
+ };
+ };
+
+ pconf: pinconf@...40800 {
+ compatible = "pinconf-single";
+ reg = <0x12040800 0x130>;
+ pinctrl-single,register-width = <32>;
+ };
+ };
+};
--
1.9.1
Powered by blists - more mailing lists