[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20170220170739.GL21222@n2100.armlinux.org.uk>
Date: Mon, 20 Feb 2017 17:07:39 +0000
From: Russell King - ARM Linux <linux@...linux.org.uk>
To: Gregory CLEMENT <gregory.clement@...e-electrons.com>
Cc: Ulf Hansson <ulf.hansson@...aro.org>,
Adrian Hunter <adrian.hunter@...el.com>,
linux-mmc@...r.kernel.org, Jimmy Xu <zmxu@...vell.com>,
Andrew Lunn <andrew@...n.ch>,
Mike Turquette <mturquette@...libre.com>,
Nadav Haklai <nadavh@...vell.com>,
Ziji Hu <huziji@...vell.com>, Victor Gu <xigu@...vell.com>,
Doug Jones <dougj@...vell.com>, linux-clk@...r.kernel.org,
Jisheng Zhang <jszhang@...vell.com>,
Yehuda Yitschak <yehuday@...vell.com>,
Marcin Wojtas <mw@...ihalf.com>,
Kostya Porotchkin <kostap@...vell.com>,
Hanna Hawa <hannah@...vell.com>,
Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
devicetree@...r.kernel.org, Jason Cooper <jason@...edaemon.net>,
Rob Herring <robh+dt@...nel.org>, Ryan Gao <ygao@...vell.com>,
"Wei(SOCP) Liu" <liuw@...vell.com>,
linux-arm-kernel@...ts.infradead.org,
Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>,
Stephen Boyd <sboyd@...eaurora.org>,
linux-kernel@...r.kernel.org, Wilson Ding <dingwei@...vell.com>
Subject: Re: [PATCH v6 00/14] mmc: Add support to Marvell Xenon SD Host
Controller
On Tue, Feb 14, 2017 at 06:01:40PM +0100, Gregory CLEMENT wrote:
> Hello,
>
> This the sixth version of the series adding support for the SDHCI
> Xenon controller. It can be currently found on the Armada 37xx and the
> Armada 7K/8K but will be also used in more Marvell SoC (and not only
> the mvebu ones actually).
>
> Most of the following changes had been discussed on the mailing list,
> except the new compatible string.
>
> It occurred that the xenon controller was integrated in a different
> way in the AP806 and the CP110 which both are part of the Armada 7K/8K
> SoCs. For example the Xenon controller in CP110 doesn't not support
> HS200.
Seems to continnue to work on the Macchiatobin board.
Tested-by: Russell King <rmk+kernel@...linux.org.uk>
Thanks.
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
Powered by blists - more mailing lists