[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-id: <1487574582-15746-2-git-send-email-hoegeun.kwon@samsung.com>
Date: Mon, 20 Feb 2017 16:09:40 +0900
From: Hoegeun Kwon <hoegeun.kwon@...sung.com>
To: thierry.reding@...il.com, airlied@...ux.ie, kgene@...nel.org,
krzk@...nel.org, robh+dt@...nel.org
Cc: dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, linux-samsung-soc@...r.kernel.org,
inki.dae@...sung.com, a.hajda@...sung.com, cw00.choi@...sung.com,
jh80.chung@...sung.com, andi.shyti@...sung.com,
Hoegeun Kwon <hoegeun.kwon@...sung.com>,
Donghwa Lee <dh09.lee@...sung.com>,
Hyungwon Hwang <human.hwang@...sung.com>
Subject: [PATCH v10 1/3] dt-bindings: Add support for samsung s6e3ha2 panel
binding
The Samsung s6e3ha2 is a 5.7" 1440x2560 AMOLED panel connected
using MIPI-DSI interfaces.
Signed-off-by: Donghwa Lee <dh09.lee@...sung.com>
Signed-off-by: Hyungwon Hwang <human.hwang@...sung.com>
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@...sung.com>
Reviewed-by: Andrzej Hajda <a.hajda@...sung.com>
Acked-by: Rob Herring <robh@...nel.org>
---
.../bindings/display/panel/samsung,s6e3ha2.txt | 28 ++++++++++++++++++++++
1 file changed, 28 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
new file mode 100644
index 0000000..18854f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
@@ -0,0 +1,28 @@
+Samsung S6E3HA2 5.7" 1440x2560 AMOLED panel
+
+Required properties:
+ - compatible: "samsung,s6e3ha2"
+ - reg: the virtual channel number of a DSI peripheral
+ - vdd3-supply: I/O voltage supply
+ - vci-supply: voltage supply for analog circuits
+ - reset-gpios: a GPIO spec for the reset pin (active low)
+ - enable-gpios: a GPIO spec for the panel enable pin (active high)
+
+Optional properties:
+ - te-gpios: a GPIO spec for the tearing effect synchronization signal
+ gpio pin (active high)
+
+Example:
+&dsi {
+ ...
+
+ panel@0 {
+ compatible = "samsung,s6e3ha2";
+ reg = <0>;
+ vdd3-supply = <&ldo27_reg>;
+ vci-supply = <&ldo28_reg>;
+ reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
+ enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
+ te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
+ };
+};
--
1.9.1
Powered by blists - more mailing lists