linux-kernel - [PATCH v3 6/8] arm64: dts: mt8173: split usb SuperSpeed port into two ports

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1487753705-6745-6-git-send-email-chunfeng.yun@mediatek.com>
Date:   Wed, 22 Feb 2017 16:55:03 +0800
From:   Chunfeng Yun <chunfeng.yun@...iatek.com>
To:     Kishon Vijay Abraham I <kishon@...com>
CC:     Matthias Brugger <matthias.bgg@...il.com>,
        Felipe Balbi <felipe.balbi@...ux.intel.com>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Ian Campbell <ijc+devicetree@...lion.org.uk>,
        Chunfeng Yun <chunfeng.yun@...iatek.com>,
        <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-usb@...r.kernel.org>, <linux-mediatek@...ts.infradead.org>,
        <devicetree@...r.kernel.org>
Subject: [PATCH v3 6/8] arm64: dts: mt8173: split usb SuperSpeed port into two ports

split the old SuperSpeed port node into a HighSpeed one and a new
SuperSpeed one.

Signed-off-by: Chunfeng Yun <chunfeng.yun@...iatek.com>
---
 arch/arm64/boot/dts/mediatek/mt8173.dtsi |   19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 12e7027..12c90e5 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -724,8 +724,9 @@
 			      <0 0x11280700 0 0x0100>;
 			reg-names = "mac", "ippc";
 			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_LOW>;
-			phys = <&phy_port0 PHY_TYPE_USB3>,
-			       <&phy_port1 PHY_TYPE_USB2>;
+			phys = <&u2port0 PHY_TYPE_USB2>,
+			       <&u3port0 PHY_TYPE_USB3>,
+			       <&u2port1 PHY_TYPE_USB2>;
 			power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
 			clocks = <&topckgen CLK_TOP_USB30_SEL>,
 				 <&pericfg CLK_PERI_USB0>,
@@ -761,14 +762,20 @@
 			ranges;
 			status = "okay";
 
-			phy_port0: port@...90800 {
-				reg = <0 0x11290800 0 0x800>;
+			u2port0: usb-phy@...90800 {
+				reg = <0 0x11290800 0 0x100>;
 				#phy-cells = <1>;
 				status = "okay";
 			};
 
-			phy_port1: port@...91000 {
-				reg = <0 0x11291000 0 0x800>;
+			u3port0: usb-phy@...90900 {
+				reg = <0 0x11290900 0 0x700>;
+				#phy-cells = <1>;
+				status = "okay";
+			};
+
+			u2port1: usb-phy@...91000 {
+				reg = <0 0x11291000 0 0x100>;
 				#phy-cells = <1>;
 				status = "okay";
 			};
-- 
1.7.9.5