| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20170222190952.2tfbtqotbi2bwd3f@lukather>
Date: Wed, 22 Feb 2017 11:09:52 -0800
From: Maxime Ripard <maxime.ripard@...e-electrons.com>
To: Icenowy Zheng <icenowy@...c.xyz>
Cc: Rob Herring <robh+dt@...nel.org>, Chen-Yu Tsai <wens@...e.org>,
Jernej Skrabec <jernej.skrabec@...l.net>,
David Airlie <airlied@...ux.ie>,
Jean-Francois Moine <moinejf@...e.fr>,
linux-clk@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
dri-devel@...ts.freedesktop.org, linux-sunxi@...glegroups.com
Subject: Re: [PATCH 2/8] clk: sunxi-ng: add support for DE2 CCU
Hi,
On Wed, Feb 22, 2017 at 11:18:48PM +0800, Icenowy Zheng wrote:
> +config SUNXI_DE2_CCU
> + bool "Support for the Allwinner SoCs DE2 CCU"
> + select SUNXI_CCU_DIV
> + select SUNXI_CCU_GATE
> + default n
This is already the default.
> +
> endif
> diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
> index 6feaac0c5600..1d36c40384a6 100644
> --- a/drivers/clk/sunxi-ng/Makefile
> +++ b/drivers/clk/sunxi-ng/Makefile
> @@ -28,3 +28,4 @@ obj-$(CONFIG_SUN8I_V3S_CCU) += ccu-sun8i-v3s.o
> obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80.o
> obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80-de.o
> obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80-usb.o
> +obj-$(CONFIG_SUNXI_DE2_CCU) += ccu-sunxi-de2.o
sun8i-de2 please
> diff --git a/drivers/clk/sunxi-ng/ccu-sunxi-de2.c b/drivers/clk/sunxi-ng/ccu-sunxi-de2.c
> new file mode 100644
> index 000000000000..4259c145d5da
> --- /dev/null
> +++ b/drivers/clk/sunxi-ng/ccu-sunxi-de2.c
> @@ -0,0 +1,204 @@
> +/*
> + * Copyright (c) 2016 Chen-Yu Tsai. All rights reserved.
Wrong author?
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/of_address.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset.h>
> +
> +#include "ccu_common.h"
> +#include "ccu_div.h"
> +#include "ccu_gate.h"
> +#include "ccu_reset.h"
> +
> +#include "ccu-sunxi-de2.h"
> +
> +static SUNXI_CCU_GATE(bus_mixer0_clk, "bus-mixer0", "bus-de",
> + 0x04, BIT(0), 0);
> +static SUNXI_CCU_GATE(bus_mixer1_clk, "bus-mixer1", "bus-de",
> + 0x04, BIT(1), 0);
> +static SUNXI_CCU_GATE(bus_wb_clk, "bus-wb", "bus-de",
> + 0x04, BIT(2), 0);
> +
> +static SUNXI_CCU_GATE(mixer0_clk, "mixer0", "mixer0-div",
> + 0x00, BIT(0), CLK_SET_RATE_PARENT);
> +static SUNXI_CCU_GATE(mixer1_clk, "mixer1", "mixer1-div",
> + 0x00, BIT(1), CLK_SET_RATE_PARENT);
> +static SUNXI_CCU_GATE(wb_clk, "wb", "wb-div",
> + 0x00, BIT(2), CLK_SET_RATE_PARENT);
> +
> +static SUNXI_CCU_M(mixer0_div_clk, "mixer0-div", "de", 0x0c, 0, 4,
> + CLK_SET_RATE_PARENT);
> +static SUNXI_CCU_M(mixer1_div_clk, "mixer1-div", "de", 0x0c, 4, 4,
> + CLK_SET_RATE_PARENT);
> +static SUNXI_CCU_M(wb_div_clk, "wb-div", "de", 0x0c, 8, 4,
> + CLK_SET_RATE_PARENT);
> +
> +static struct ccu_common *sunxi_de2_clks[] = {
> + &mixer0_clk.common,
> + &mixer1_clk.common,
> + &wb_clk.common,
> +
> + &bus_mixer0_clk.common,
> + &bus_mixer1_clk.common,
> + &bus_wb_clk.common,
> +
> + &mixer0_div_clk.common,
> + &mixer1_div_clk.common,
> + &wb_div_clk.common,
> +};
> +
> +static struct clk_hw_onecell_data sunxi_de2_hw_clks = {
> + .hws = {
> + [CLK_MIXER0] = &mixer0_clk.common.hw,
> + [CLK_MIXER1] = &mixer1_clk.common.hw,
> + [CLK_WB] = &wb_clk.common.hw,
> +
> + [CLK_BUS_MIXER0] = &bus_mixer0_clk.common.hw,
> + [CLK_BUS_MIXER1] = &bus_mixer1_clk.common.hw,
> + [CLK_BUS_WB] = &bus_wb_clk.common.hw,
> +
> + [CLK_MIXER0_DIV] = &mixer1_div_clk.common.hw,
> + [CLK_MIXER1_DIV] = &mixer0_div_clk.common.hw,
> + [CLK_WB_DIV] = &wb_div_clk.common.hw,
> + },
> + .num = CLK_NUMBER,
> +};
> +
> +static struct ccu_reset_map sun8i_a83t_de2_resets[] = {
> + [RST_MIXER0] = { 0x08, BIT(0) },
> + /*
> + * For A83T, H3 and R40, mixer1 reset line is shared with wb, so
> + * only RST_WB is exported here.
> + */
> + [RST_WB] = { 0x08, BIT(2) },
> +};
> +
> +static struct ccu_reset_map sun50i_a64_de2_resets[] = {
> + [RST_MIXER0] = { 0x08, BIT(0) },
> + [RST_MIXER1] = { 0x08, BIT(1) },
> + [RST_WB] = { 0x08, BIT(2) },
> +};
> +
> +static const struct sunxi_ccu_desc sun8i_a83t_de2_clk_desc = {
> + .ccu_clks = sunxi_de2_clks,
> + .num_ccu_clks = ARRAY_SIZE(sunxi_de2_clks),
> +
> + .hw_clks = &sunxi_de2_hw_clks,
> +
> + .resets = sun8i_a83t_de2_resets,
> + .num_resets = ARRAY_SIZE(sun8i_a83t_de2_resets),
> +};
> +
> +static const struct sunxi_ccu_desc sun50i_a64_de2_clk_desc = {
> + .ccu_clks = sunxi_de2_clks,
> + .num_ccu_clks = ARRAY_SIZE(sunxi_de2_clks),
> +
> + .hw_clks = &sunxi_de2_hw_clks,
> +
> + .resets = sun50i_a64_de2_resets,
> + .num_resets = ARRAY_SIZE(sun50i_a64_de2_resets),
> +};
> +
> +static int sunxi_de2_clk_probe(struct platform_device *pdev)
> +{
> + struct resource *res;
> + struct clk *bus_clk;
> + struct reset_control *rstc;
> + void __iomem *reg;
> + const struct sunxi_ccu_desc *ccu_desc;
> + int ret;
> +
> + ccu_desc = of_device_get_match_data(&pdev->dev);
> + if (!ccu_desc)
> + return -EINVAL;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + reg = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(reg))
> + return PTR_ERR(reg);
> +
> + bus_clk = devm_clk_get(&pdev->dev, "bus");
> + if (IS_ERR(bus_clk)) {
> + ret = PTR_ERR(bus_clk);
> + if (ret != -EPROBE_DEFER)
> + dev_err(&pdev->dev, "Couldn't get bus clk: %d\n", ret);
> + return ret;
> + }
> +
> + rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
> + if (IS_ERR(rstc)) {
> + ret = PTR_ERR(bus_clk);
> + if (ret != -EPROBE_DEFER)
> + dev_err(&pdev->dev,
> + "Couldn't get reset control: %d\n", ret);
> + return ret;
> + }
> +
> + /* The bus clock needs to be enabled for us to access the registers */
> + ret = clk_prepare_enable(bus_clk);
> + if (ret) {
> + dev_err(&pdev->dev, "Couldn't enable bus clk: %d\n", ret);
> + return ret;
> + }
That looks inefficient if none of the clocks are enabled. Maybe you
can use CLK_OPS_PARENT_ENABLE?
Thanks,
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
Download attachment "signature.asc" of type "application/pgp-signature" (802 bytes)
Powered by blists - more mailing lists