Message-ID: <cbff561b-cc22-d2d0-bf67-7042247d9cc5@collabora.com>
Date:   Fri, 24 Feb 2017 10:34:52 +0100
From:   Enric Balletbo i Serra <enric.balletbo@...labora.com>
To:     Chanwoo Choi <cw00.choi@...sung.com>,
        MyungJoo Ham <myungjoo.ham@...sung.com>,
        Rob Herring <robh+dt@...nel.org>
Cc:     Lee Jones <lee.jones@...aro.org>, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org, Benson Leung <bleung@...omium.org>
Subject: Re: [PATCH 1/2] extcon: cros-ec: Add extcon-cros-ec driver to support
 display out.

Hi,

Thanks for the review.

On 24/02/17 04:41, Chanwoo Choi wrote:
> Hi,
> 
> I tested the build of this driver based on linux-next.git[1].
> The following error happens. But, I think that the needed
> patches have not yet merged. I'll expect to fix build issue on next version.
> 
> drivers/extcon/extcon-cros_ec.c: In function ‘extcon_cros_ec_event’:
> drivers/extcon/extcon-cros_ec.c:315:2: error: implicit declaration of function ‘cros_ec_get_host_event’ [-Werror=implicit-function-declaration]
> drivers/extcon/extcon-cros_ec.c:316:20: error: ‘EC_HOST_EVENT_PD_MCU’ undeclared (first use in this function)
> drivers/extcon/extcon-cros_ec.c:316:20: note: each undeclared identifier is reported only once for each function it appears in
> drivers/extcon/extcon-cros_ec.c:317:6: error: ‘EC_HOST_EVENT_USB_MUX’ undeclared (first use in this function)
> 
> [1] 27fde840c0aa - "Add linux-next specific files for 20170223" on linux-next.git
> 

CC'ing Lee Jones

Sorry I forget to say that these patches depends on cros_ec_rtc series, to be more concrete depends on [1] and [2] to apply cleanly and build. The patches have the necessary acks to land but unfortunately I send too late to be merged in current merge window, they will go through the MFD tree and I expect see them merged for next merge window so hopefully see soon in linux-next. I'll send the second version once the patches land in linux-next.

[1] http://patchwork.ozlabs.org/patch/727997/
[2] http://patchwork.ozlabs.org/patch/727999/
[3] http://patchwork.ozlabs.org/patch/728000/ 
[4] http://patchwork.ozlabs.org/patch/727998/

Thanks,
  Enric

> 
> On 2017년 02월 21일 00:18, Enric Balletbo i Serra wrote:
>> From: Benson Leung <bleung@...omium.org>
>>
>> This is the driver for the USB Type C cable detection mechanism
>> built into the ChromeOS Embedded Controller on systems that
>> have USB Type-C ports.
>>
>> At present, this allows for the presence of display out, but in
>> future, it may also be used to notify host and device type cables
>> and the presence of power.
>>
>> Signed-off-by: Benson Leung <bleung@...omium.org>
>> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@...labora.com>
>> ---
>>  drivers/extcon/Kconfig               |   7 +
>>  drivers/extcon/Makefile              |   1 +
>>  drivers/extcon/extcon-cros_ec.c      | 480 +++++++++++++++++++++++++++++++++++
> 
> You better to change the filename as following with '-' instead of '_'.
> - extcon-cros_ec.c -> extcon-cros-ec.c
> 
>>  include/linux/mfd/cros_ec_commands.h |  75 ++++++
>>  4 files changed, 563 insertions(+)
>>  create mode 100644 drivers/extcon/extcon-cros_ec.c
>>
>> diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
>> index 96bbae5..d2863ee 100644
>> --- a/drivers/extcon/Kconfig
>> +++ b/drivers/extcon/Kconfig
>> @@ -35,6 +35,13 @@ config EXTCON_AXP288
>>  	  Say Y here to enable support for USB peripheral detection
>>  	  and USB MUX switching by X-Power AXP288 PMIC.
>>  
>> +config EXTCON_CROS_EC
>> +	tristate "ChromeOS EC extcon support"
> 
> I prefer to add the detailed word to help the understand as following:
> and better to use the captical letter for 'extcon' word
> because the other entry in Kconfig uses the 'EXTCON' word.
> 
> 	"ChromeOS Embedded Controller EXTCON support"
> 	or
> 	"ChromeOS EC(Embedded Controller) EXTCON support"
> 
>> +	depends on MFD_CROS_EC
>> +	help
>> +	  Say Y here to enable USB Type C cable detection extcon support when
>> +	  using Chrome OS EC based USB Type-C ports.
>> +
>>  config EXTCON_GPIO
>>  	tristate "GPIO extcon support"
>>  	depends on GPIOLIB || COMPILE_TEST
>> diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile
>> index 237ac3f..1c9d155 100644
>> --- a/drivers/extcon/Makefile
>> +++ b/drivers/extcon/Makefile
>> @@ -7,6 +7,7 @@ extcon-core-objs		+= extcon.o devres.o
>>  obj-$(CONFIG_EXTCON_ADC_JACK)	+= extcon-adc-jack.o
>>  obj-$(CONFIG_EXTCON_ARIZONA)	+= extcon-arizona.o
>>  obj-$(CONFIG_EXTCON_AXP288)	+= extcon-axp288.o
>> +obj-$(CONFIG_EXTCON_CROS_EC)	+= extcon-cros_ec.o
> 
> Ditto.
> - extcon-cros_ec.o -> extcon-cros-ec.o
> 
>>  obj-$(CONFIG_EXTCON_GPIO)	+= extcon-gpio.o
>>  obj-$(CONFIG_EXTCON_INTEL_INT3496) += extcon-intel-int3496.o
>>  obj-$(CONFIG_EXTCON_MAX14577)	+= extcon-max14577.o
>> diff --git a/drivers/extcon/extcon-cros_ec.c b/drivers/extcon/extcon-cros_ec.c
>> new file mode 100644
>> index 0000000..e8b9f58
>> --- /dev/null
>> +++ b/drivers/extcon/extcon-cros_ec.c
>> @@ -0,0 +1,480 @@
>> +/**
>> + * drivers/extcon/extcon-cros_ec - ChromeOS Embedded Controller extcon
> 
> Ditto.
> - extcon-cros_ec -> extcon-cros-ec.c
> 
>> + *
>> + * Copyright (C) 2017 Google, Inc
> 
> Maybe, you are missing the author information?
> 
>> + *
>> + * This software is licensed under the terms of the GNU General Public
>> + * License version 2, as published by the Free Software Foundation, and
>> + * may be copied, distributed, and modified under those terms.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + *
> 
> Remove the unneeded blank line.
> 
>> + */
>> +
>> +#include <linux/extcon.h>
>> +#include <linux/kernel.h>
>> +#include <linux/kobject.h>
> 
> 'kobject.h' is already included in the 'module.h'.
> So, you don't need to include it.
> 
>> +#include <linux/mfd/cros_ec.h>
>> +#include <linux/mfd/cros_ec_commands.h>
> 
> The <linux/mfd/cros_ec.h> already includes the "cros_ec_commands.h".
> So, you don't need to include this header file.
> 
>> +#include <linux/module.h>
>> +#include <linux/notifier.h>
>> +#include <linux/of.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/slab.h>
>> +#include <linux/sched.h>
>> +
>> +struct cros_ec_extcon_info {
>> +	struct device *dev;
>> +	struct extcon_dev *edev;
>> +
>> +	int port_id;
>> +
>> +	struct cros_ec_device *ec;
>> +
>> +	struct notifier_block notifier;
>> +
>> +	bool dp; /* DisplayPort enabled */
>> +	bool mux; /* SuperSpeed (usb3) enabled */
>> +	unsigned int power_type;
>> +};
>> +
>> +static const unsigned int usb_type_c_cable[] = {
>> +	EXTCON_USB,
>> +	EXTCON_USB_HOST,
>> +	EXTCON_DISP_DP,
>> +	EXTCON_NONE,
>> +};
>> +
>> +/**
>> + * cros_ec_pd_command() - Send a command to the EC.
>> + * @info: pointer to struct cros_ec_extcon_info
>> + * @command: EC command
>> + * @version: EC command version
>> + * @outdata: EC command output data
>> + * @outsize: Size of outdata
>> + * @indata: EC command input data
>> + * @insize: Size of indata
>> + *
>> + * Return: 0 on success, <0 on failure.
>> + */
>> +static int cros_ec_pd_command(struct cros_ec_extcon_info *info,
>> +			      unsigned int command,
>> +			      unsigned int version,
>> +			      void *outdata,
>> +			      unsigned int outsize,
>> +			      void *indata,
>> +			      unsigned int insize)
>> +{
>> +	struct cros_ec_command *msg;
>> +	int ret;
>> +
>> +	msg = kzalloc(sizeof(*msg) + max(outsize, insize), GFP_KERNEL);
>> +
>> +	msg->version = version;
>> +	msg->command = command;
>> +	msg->outsize = outsize;
>> +	msg->insize = insize;
>> +
>> +	if (outsize)
>> +		memcpy(msg->data, outdata, outsize);
>> +
>> +	ret = cros_ec_cmd_xfer_status(info->ec, msg);
>> +	if (ret >= 0 && insize)
>> +		memcpy(indata, msg->data, insize);
>> +
>> +	kfree(msg);
>> +	return ret;
>> +}
>> +
>> +/**
>> + * cros_ec_usb_get_power_type() - Get power type info about PD device attached
>> + * to given port.
>> + * @info: pointer to struct cros_ec_extcon_info
>> + *
>> + * Return: power type on success, <0 on failure.
>> + */
>> +static int cros_ec_usb_get_power_type(struct cros_ec_extcon_info *info)
>> +{
>> +	struct ec_params_usb_pd_power_info req;
>> +	struct ec_response_usb_pd_power_info resp;
>> +	int ret;
>> +
>> +	req.port = info->port_id;
>> +	ret = cros_ec_pd_command(info, EC_CMD_USB_PD_POWER_INFO, 0,
>> +				 &req, sizeof(req), &resp, sizeof(resp));
>> +	if (ret < 0)
>> +		return ret;
>> +
>> +	return resp.type;
>> +}
>> +
>> +/**
>> + * cros_ec_usb_get_pd_mux_state() - Get PD mux state for given port.
>> + * @info: pointer to struct cros_ec_extcon_info
>> + *
>> + * Return: PD mux state on success, <0 on failure.
>> + */
>> +static int cros_ec_usb_get_pd_mux_state(struct cros_ec_extcon_info *info)
>> +{
>> +	struct ec_params_usb_pd_mux_info req;
>> +	struct ec_response_usb_pd_mux_info resp;
>> +	int ret;
>> +
>> +	req.port = info->port_id;
>> +	ret = cros_ec_pd_command(info, EC_CMD_USB_PD_MUX_INFO, 0,
>> +				 &req, sizeof(req),
>> +				 &resp, sizeof(resp));
>> +	if (ret < 0)
>> +		return ret;
>> +
>> +	return resp.flags;
>> +}
>> +
>> +/**
>> + * cros_ec_usb_get_role() - Get role info about possible PD device attached to a
>> + * given port.
>> + * @info: pointer to struct cros_ec_extcon_info
>> + * @polarity: pointer to cable polarity (return value)
>> + *
>> + * Return: role info on success, -ENOTCONN if no cable is connected, <0 on
>> + * failure.
>> + */
>> +static int cros_ec_usb_get_role(struct cros_ec_extcon_info *info,
>> +				bool *polarity)
>> +{
>> +	struct ec_params_usb_pd_control pd_control;
>> +	struct ec_response_usb_pd_control_v1 resp;
>> +	int ret;
>> +
>> +	pd_control.port = info->port_id;
>> +	pd_control.role = USB_PD_CTRL_ROLE_NO_CHANGE;
>> +	pd_control.mux = USB_PD_CTRL_MUX_NO_CHANGE;
>> +	ret = cros_ec_pd_command(info, EC_CMD_USB_PD_CONTROL, 1,
>> +				 &pd_control, sizeof(pd_control),
>> +				 &resp, sizeof(resp));
>> +	if (ret < 0)
>> +		return ret;
>> +
>> +	if (!(resp.enabled & PD_CTRL_RESP_ENABLED_CONNECTED))
>> +		return -ENOTCONN;
>> +
>> +	*polarity = resp.polarity;
>> +
>> +	return resp.role;
>> +}
>> +
>> +/**
>> + * cros_ec_pd_get_num_ports() - Get number of EC charge ports.
>> + * @info: pointer to struct cros_ec_extcon_info
>> + *
>> + * Return: number of ports on success, <0 on failure.
>> + */
>> +static int cros_ec_pd_get_num_ports(struct cros_ec_extcon_info *info)
>> +{
>> +	struct ec_response_usb_pd_ports resp;
>> +	int ret;
>> +
>> +	ret = cros_ec_pd_command(info, EC_CMD_USB_PD_PORTS,
>> +				 0, NULL, 0, &resp, sizeof(resp));
>> +	if (ret < 0)
>> +		return ret;
>> +
>> +	return resp.num_ports;
>> +}
>> +
>> +static const char *cros_ec_usb_power_type_string(unsigned int type)
>> +{
>> +	switch (type) {
>> +	case USB_CHG_TYPE_NONE:
>> +		return "USB_CHG_TYPE_NONE";
>> +	case USB_CHG_TYPE_PD:
>> +		return "USB_CHG_TYPE_PD";
>> +	case USB_CHG_TYPE_PROPRIETARY:
>> +		return "USB_CHG_TYPE_PROPRIETARY";
>> +	case USB_CHG_TYPE_C:
>> +		return "USB_CHG_TYPE_C";
>> +	case USB_CHG_TYPE_BC12_DCP:
>> +		return "USB_CHG_TYPE_BC12_DCP";
>> +	case USB_CHG_TYPE_BC12_CDP:
>> +		return "USB_CHG_TYPE_BC12_CDP";
>> +	case USB_CHG_TYPE_BC12_SDP:
>> +		return "USB_CHG_TYPE_BC12_SDP";
>> +	case USB_CHG_TYPE_OTHER:
>> +		return "USB_CHG_TYPE_OTHER";
>> +	case USB_CHG_TYPE_VBUS:
>> +		return "USB_CHG_TYPE_VBUS";
>> +	case USB_CHG_TYPE_UNKNOWN:
>> +		return "USB_CHG_TYPE_UNKNOWN";
>> +	default:
>> +		return "USB_CHG_TYPE_UNKNOWN";
>> +	}
>> +}
>> +
>> +static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info,
>> +				       bool force)
>> +{
>> +	struct device *dev = info->dev;
>> +	int role, power_type;
>> +	bool polarity, dp, mux, hpd;
>> +
>> +	power_type = cros_ec_usb_get_power_type(info);
>> +	if (power_type < 0) {
>> +		dev_err(dev, "failed getting power type err = %d\n",
>> +			power_type);
>> +		return power_type;
>> +	}
>> +
>> +	role = cros_ec_usb_get_role(info, &polarity);
>> +	if (role < 0) {
>> +		if (role != -ENOTCONN) {
>> +			dev_err(dev, "failed getting role err = %d\n", role);
>> +			return role;
>> +		}
>> +		polarity = false;
>> +		dp = false;
>> +		mux = false;
>> +		hpd = false;
> 
> Minor comment,
> I think that you better to initializes the 'polarity, dp, mux, hpd'
> when it declared. And, if the external connector is connected,
> you can set the value. But, I don't force to change it.
> 
> -       bool polarity, dp, mux, hpd;
> +       bool polarity = false;
> +       bool dp = false;
> +       bool mux = false;
> +       bool hpd = false;
>  
>         power_type = cros_ec_usb_get_power_type(info);
>         if (power_type < 0) {
> @@ -233,10 +236,6 @@ static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info,
>                         dev_err(dev, "failed getting role err = %d\n", role);
>                         return role;
>                 }
> -               polarity = false;
> -               dp = false;
> -               mux = false;
> -               hpd = false;
>                 dev_dbg(dev, "disconnected\n");
>         } else {
>                 int pd_mux_state;
> @@ -245,6 +244,7 @@ static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info,
>                 if (pd_mux_state < 0)
>                         pd_mux_state = USB_PD_MUX_USB_ENABLED;
>  
> +               polarity = true;
>                 dp = pd_mux_state & USB_PD_MUX_DP_ENABLED;
>                 mux = pd_mux_state & USB_PD_MUX_USB_ENABLED;
>                 hpd = pd_mux_state & USB_PD_MUX_HPD_IRQ;
> 
> 
> 
>> +		dev_dbg(dev, "disconnected\n");
> 
> This debug message is necessary?
> 
> If you want to add the debug message, I recommend you print
> the more detailed message with the connector type or name.
> 
> 	For example,
> 	    'xxx' connector is disconnected'.
> 
>> +	} else {
>> +		int pd_mux_state;
>> +
>> +		pd_mux_state = cros_ec_usb_get_pd_mux_state(info);
>> +		if (pd_mux_state < 0)
>> +			pd_mux_state = USB_PD_MUX_USB_ENABLED;
>> +
>> +		dp = pd_mux_state & USB_PD_MUX_DP_ENABLED;
>> +		mux = pd_mux_state & USB_PD_MUX_USB_ENABLED;
>> +		hpd = pd_mux_state & USB_PD_MUX_HPD_IRQ;
>> +	}
>> +
>> +	if (force || info->dp != dp ||
>> +	    info->mux != mux || info->power_type != power_type) {
> 
> Use the tab for indentation instead of space as following.
> 
> 	if (force || info->dp != dp ||
> 		info->mux != mux || info->power_type != power_type) {
> 
> 
>> +		bool host_connected = false, device_connected = false;
> 
> I prefer to define the each variable on different line
> when the variables should be initialized as following:
> 
> 		bool host_connected = false;
> 		bool device_connected = false;
> 
>> +
>> +		dev_dbg(dev, "Type/Role switch! type = %s\n",
>> +			cros_ec_usb_power_type_string(power_type));
>> +
>> +		info->dp = dp;
>> +		info->mux = mux;
>> +		info->power_type = power_type;
>> +
>> +		extcon_set_state(info->edev, EXTCON_USB, device_connected);
>> +		extcon_set_state(info->edev, EXTCON_USB_HOST, host_connected);
> 
> EXTCON_USB and EXTCON_USB_HOST are always disconnected?
> 
>> +		extcon_set_state(info->edev, EXTCON_DISP_DP, dp);
> 
> You better to add one blank line to split out between state and property setting.
> 
>> +		extcon_set_property(info->edev, EXTCON_USB,
>> +				    EXTCON_PROP_USB_TYPEC_POLARITY,
>> +				    (union extcon_property_value)(int)polarity);
>> +		extcon_set_property(info->edev, EXTCON_USB_HOST,
>> +				    EXTCON_PROP_USB_TYPEC_POLARITY,
>> +				    (union extcon_property_value)(int)polarity);
>> +		extcon_set_property(info->edev, EXTCON_DISP_DP,
>> +				    EXTCON_PROP_USB_TYPEC_POLARITY,
>> +				    (union extcon_property_value)(int)polarity);
> 
>> +		extcon_set_property(info->edev, EXTCON_USB,
>> +				    EXTCON_PROP_USB_SS,
>> +				    (union extcon_property_value)(int)mux);
>> +		extcon_set_property(info->edev, EXTCON_USB_HOST,
>> +				    EXTCON_PROP_USB_SS,
>> +				    (union extcon_property_value)(int)mux);
>> +		extcon_set_property(info->edev, EXTCON_DISP_DP,
>> +				    EXTCON_PROP_USB_SS,
>> +				    (union extcon_property_value)(int)mux);
>> +
>> +		extcon_set_property(info->edev, EXTCON_DISP_DP,
>> +				    EXTCON_PROP_DISP_HPD,
>> +				    (union extcon_property_value)(int)hpd);
>> +
>> +		extcon_sync(info->edev, EXTCON_USB);
>> +		extcon_sync(info->edev, EXTCON_USB_HOST);
>> +		extcon_sync(info->edev, EXTCON_DISP_DP);
>> +
>> +	} else if (hpd) {
>> +		extcon_set_property(info->edev, EXTCON_DISP_DP,
>> +				    EXTCON_PROP_DISP_HPD,
>> +				    (union extcon_property_value)(int)hpd);
>> +		extcon_sync(info->edev, EXTCON_DISP_DP);
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static int extcon_cros_ec_event(struct notifier_block *nb,
>> +				unsigned long queued_during_suspend,
>> +				void *_notify)
>> +{
>> +	struct cros_ec_extcon_info *info;
>> +	struct cros_ec_device *ec;
>> +	u32 host_event;
>> +
>> +	info = container_of(nb, struct cros_ec_extcon_info, notifier);
>> +	ec = info->ec;
>> +
>> +	host_event = cros_ec_get_host_event(ec);
>> +	if (host_event & (EC_HOST_EVENT_MASK(EC_HOST_EVENT_PD_MCU) |
>> +			  EC_HOST_EVENT_MASK(EC_HOST_EVENT_USB_MUX))) {
>> +		extcon_cros_ec_detect_cable(info, false);
>> +		return NOTIFY_OK;
>> +	}
>> +
>> +	return NOTIFY_DONE;
>> +}
>> +
>> +static int extcon_cros_ec_probe(struct platform_device *pdev)
>> +{
>> +	struct cros_ec_extcon_info *info;
>> +	struct cros_ec_device *ec = dev_get_drvdata(pdev->dev.parent);
>> +	struct device *dev = &pdev->dev;
>> +	struct device_node *np = dev->of_node;
>> +	int numports, ret;
>> +
>> +	info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
>> +	if (!info)
>> +		return -ENOMEM;
>> +
>> +	info->dev = dev;
>> +	info->ec = ec;
>> +
>> +	if (np) {
>> +		u32 port;
>> +
>> +		ret = of_property_read_u32(np, "google,usb-port-id", &port);
>> +		if (ret < 0) {
>> +			dev_err(dev, "Missing google,usb-port-id property\n");
>> +			return ret;
>> +		}
>> +		info->port_id = port;
>> +	} else {
>> +		info->port_id = pdev->id;
>> +	}
>> +
>> +	numports = cros_ec_pd_get_num_ports(info);
>> +	if (numports < 0) {
>> +		dev_err(dev, "failed getting number of ports! ret = %d\n",
>> +			numports);
>> +		return numports;
>> +	}
>> +
>> +	if (info->port_id >= numports) {
>> +		dev_err(dev, "This system only supports %d ports\n", numports);
>> +		return -ENODEV;
>> +	}
>> +
>> +	info->edev = devm_extcon_dev_allocate(dev, usb_type_c_cable);
>> +	if (IS_ERR(info->edev)) {
>> +		dev_err(dev, "failed to allocate extcon device\n");
>> +		return -ENOMEM;
>> +	}
>> +
>> +	ret = devm_extcon_dev_register(dev, info->edev);
>> +	if (ret < 0) {
>> +		dev_err(dev, "failed to register extcon device\n");
>> +		return ret;
>> +	}
>> +
>> +	extcon_set_property_capability(info->edev, EXTCON_USB,
>> +				       EXTCON_PROP_USB_VBUS);
>> +	extcon_set_property_capability(info->edev, EXTCON_USB_HOST,
>> +				       EXTCON_PROP_USB_VBUS);
>> +	extcon_set_property_capability(info->edev, EXTCON_USB,
>> +				       EXTCON_PROP_USB_TYPEC_POLARITY);
>> +	extcon_set_property_capability(info->edev, EXTCON_USB_HOST,
>> +				       EXTCON_PROP_USB_TYPEC_POLARITY);
>> +	extcon_set_property_capability(info->edev, EXTCON_DISP_DP,
>> +				       EXTCON_PROP_USB_TYPEC_POLARITY);
>> +	extcon_set_property_capability(info->edev, EXTCON_USB,
>> +				       EXTCON_PROP_USB_SS);
>> +	extcon_set_property_capability(info->edev, EXTCON_USB_HOST,
>> +				       EXTCON_PROP_USB_SS);
>> +	extcon_set_property_capability(info->edev, EXTCON_DISP_DP,
>> +				       EXTCON_PROP_USB_SS);
>> +	extcon_set_property_capability(info->edev, EXTCON_DISP_DP,
>> +				       EXTCON_PROP_DISP_HPD);
>> +
>> +	platform_set_drvdata(pdev, info);
>> +
>> +	/* Get PD events from the EC */
>> +	info->notifier.notifier_call = extcon_cros_ec_event;
>> +	ret = blocking_notifier_chain_register(&info->ec->event_notifier,
>> +					       &info->notifier);
>> +	if (ret < 0) {
>> +		dev_err(dev, "failed to register notifier\n");
>> +		return ret;
>> +	}
>> +
>> +	/* Perform initial detection */
>> +	ret = extcon_cros_ec_detect_cable(info, true);
>> +	if (ret < 0) {
>> +		dev_err(dev, "failed to detect initial cable state\n");
>> +		goto unregister_notifier;
>> +	}
>> +
>> +	return 0;
>> +
>> +unregister_notifier:
>> +	blocking_notifier_chain_unregister(&info->ec->event_notifier,
>> +					   &info->notifier);
>> +	return ret;
>> +}
>> +
>> +static int extcon_cros_ec_remove(struct platform_device *pdev)
>> +{
>> +	struct cros_ec_extcon_info *info = platform_get_drvdata(pdev);
>> +
>> +	blocking_notifier_chain_unregister(&info->ec->event_notifier,
>> +					   &info->notifier);
>> +
>> +	return 0;
>> +}
>> +
>> +#ifdef CONFIG_PM_SLEEP
>> +static int extcon_cros_ec_suspend(struct device *dev)
>> +{
>> +	return 0;
>> +}
>> +
>> +static int extcon_cros_ec_resume(struct device *dev)
>> +{
>> +	int ret;
>> +	struct cros_ec_extcon_info *info = dev_get_drvdata(dev);
>> +
>> +	ret = extcon_cros_ec_detect_cable(info, true);
>> +	if (ret < 0)
>> +		dev_err(dev, "failed to detect cable state on resume\n");
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct dev_pm_ops extcon_cros_ec_dev_pm_ops = {
>> +	SET_SYSTEM_SLEEP_PM_OPS(extcon_cros_ec_suspend, extcon_cros_ec_resume)
>> +};
>> +
>> +#define DEV_PM_OPS	(&extcon_cros_ec_dev_pm_ops)
>> +#else
>> +#define DEV_PM_OPS	NULL
>> +#endif /* CONFIG_PM_SLEEP */
>> +
>> +#ifdef CONFIG_OF
>> +static const struct of_device_id extcon_cros_ec_of_match[] = {
>> +	{ .compatible = "google,extcon-cros-ec" },
>> +	{ /* sentinel */ }
>> +};
>> +MODULE_DEVICE_TABLE(of, extcon_cros_ec_of_match);
>> +#endif /* CONFIG_OF */
>> +
>> +static struct platform_driver extcon_cros_ec_driver = {
>> +	.driver = {
>> +		.name  = "extcon-cros-ec",
>> +		.of_match_table = of_match_ptr(extcon_cros_ec_of_match),
>> +		.pm = DEV_PM_OPS,
>> +	},
>> +	.remove  = extcon_cros_ec_remove,
>> +	.probe   = extcon_cros_ec_probe,
>> +};
>> +
>> +module_platform_driver(extcon_cros_ec_driver);
>> +
>> +MODULE_LICENSE("GPL");
>> +MODULE_DESCRIPTION("ChromeOS Embedded Controller extcon driver");
> 
> You have to add the author information.
> 
> 
>> diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
>> index 255d14a..3ca9953 100644
>> --- a/include/linux/mfd/cros_ec_commands.h
>> +++ b/include/linux/mfd/cros_ec_commands.h
>> @@ -285,10 +285,15 @@ enum host_event_code {
>>  	EC_HOST_EVENT_HANG_DETECT = 20,
>>  	/* Hang detect logic detected a hang and warm rebooted the AP */
>>  	EC_HOST_EVENT_HANG_REBOOT = 21,
>> +	/* PD MCU triggering host event */
>> +	EC_HOST_EVENT_PD_MCU = 22,
>>  
>>  	/* EC RTC event occurred */
>>  	EC_HOST_EVENT_RTC = 26,
>>  
>> +	/* EC desires to change state of host-controlled USB mux */
>> +	EC_HOST_EVENT_USB_MUX = 28,
>> +
>>  	/*
>>  	 * The high bit of the event mask is not used as a host event code.  If
>>  	 * it reads back as set, then the entire event mask should be
>> @@ -2873,6 +2878,76 @@ struct ec_params_usb_pd_control {
>>  	uint8_t mux;
>>  } __packed;
>>  
>> +#define PD_CTRL_RESP_ENABLED_COMMS      (1 << 0) /* Communication enabled */
>> +#define PD_CTRL_RESP_ENABLED_CONNECTED  (1 << 1) /* Device connected */
>> +#define PD_CTRL_RESP_ENABLED_PD_CAPABLE (1 << 2) /* Partner is PD capable */
>> +
>> +struct ec_response_usb_pd_control_v1 {
>> +	uint8_t enabled;
>> +	uint8_t role;
>> +	uint8_t polarity;
>> +	char state[32];
>> +} __packed;
>> +
>> +#define EC_CMD_USB_PD_PORTS 0x102
>> +
>> +struct ec_response_usb_pd_ports {
>> +	uint8_t num_ports;
>> +} __packed;
>> +
>> +#define EC_CMD_USB_PD_POWER_INFO 0x103
>> +
>> +#define PD_POWER_CHARGING_PORT 0xff
>> +struct ec_params_usb_pd_power_info {
>> +	uint8_t port;
>> +} __packed;
>> +
>> +enum usb_chg_type {
>> +	USB_CHG_TYPE_NONE,
>> +	USB_CHG_TYPE_PD,
>> +	USB_CHG_TYPE_C,
>> +	USB_CHG_TYPE_PROPRIETARY,
>> +	USB_CHG_TYPE_BC12_DCP,
>> +	USB_CHG_TYPE_BC12_CDP,
>> +	USB_CHG_TYPE_BC12_SDP,
>> +	USB_CHG_TYPE_OTHER,
>> +	USB_CHG_TYPE_VBUS,
>> +	USB_CHG_TYPE_UNKNOWN,
>> +};
>> +
>> +struct usb_chg_measures {
>> +	uint16_t voltage_max;
>> +	uint16_t voltage_now;
>> +	uint16_t current_max;
>> +	uint16_t current_lim;
>> +} __packed;
>> +
>> +struct ec_response_usb_pd_power_info {
>> +	uint8_t role;
>> +	uint8_t type;
>> +	uint8_t dualrole;
>> +	uint8_t reserved1;
>> +	struct usb_chg_measures meas;
>> +	uint32_t max_power;
>> +} __packed;
>> +
>> +/* Get info about USB-C SS muxes */
>> +#define EC_CMD_USB_PD_MUX_INFO 0x11a
>> +
>> +struct ec_params_usb_pd_mux_info {
>> +	uint8_t port; /* USB-C port number */
>> +} __packed;
>> +
>> +/* Flags representing mux state */
>> +#define USB_PD_MUX_USB_ENABLED       (1 << 0)
>> +#define USB_PD_MUX_DP_ENABLED        (1 << 1)
>> +#define USB_PD_MUX_POLARITY_INVERTED (1 << 2)
>> +#define USB_PD_MUX_HPD_IRQ           (1 << 3)
>> +
>> +struct ec_response_usb_pd_mux_info {
>> +	uint8_t flags; /* USB_PD_MUX_*-encoded USB mux state */
>> +} __packed;
>> +
>>  /*****************************************************************************/
>>  /*
>>   * Passthru commands
>>
> 
> 

Powered by blists - more mailing lists