[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <884efafc-6b34-0cb6-4c9f-e3a926114130@baylibre.com>
Date: Mon, 27 Feb 2017 15:03:57 +0100
From: Frode Isaksen <fisaksen@...libre.com>
To: Vignesh R <vigneshr@...com>, David Woodhouse <dwmw2@...radead.org>,
Brian Norris <computersforpeace@...il.com>,
Boris Brezillon <boris.brezillon@...e-electrons.com>,
Marek Vasut <marek.vasut@...il.com>,
Richard Weinberger <richard@....at>,
Cyrille Pitchen <cyrille.pitchen@...el.com>
Cc: linux-mtd@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-omap@...r.kernel.org, linux-spi@...r.kernel.org
Subject: Re: [RFC PATCH 0/2] mtd: spi-nor: Handle vmalloc'd buffers
On 27/02/2017 13:08, Vignesh R wrote:
> This series implements bounce buffer support to handle vmalloc'd buffers
> in case of drivers use DMA, similar to what is done in MTD NAND
> framework.
>
> I have tested this on two platform:
> DRA74 SoC (cortex a15 @1GHz) with s25fl256s1 QSPI (SPI bus frequency
> 76.8 MHz) and I don't see any performance degradation with UBIFS
> read/write(10MB file).
> AM437x SoC (cortex a9 @1GHz) with macronix mx66l51235l QSPI flash (SPI bus
> frequency 48MHz) and performance degradation is <4% for UBIFS.
>
>
> Vignesh R (2):
> mtd: spi-nor: Introduce bounce buffer to handle vmalloc'd buffers
> mtd: devices: m25p80: Enable spi-nor bounce buffer support
>
> drivers/mtd/devices/m25p80.c | 1 +
> drivers/mtd/spi-nor/spi-nor.c | 30 +++++++++++++++++++++++++++---
> include/linux/mtd/spi-nor.h | 4 ++++
> 3 files changed, 32 insertions(+), 3 deletions(-)
>
I have tested this on a daVinci EVM board with SPI DMA enabled and the UBIFS tests all passed.
Thanks,
Frode
Powered by blists - more mailing lists