linux-kernel - Re: [PATCH v2 5/6] DT bindings documentation for Broadcom IPROC USB Device controller.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20170227205241.xn7mtmyt645m7dht@rob-hp-laptop>
Date:   Mon, 27 Feb 2017 14:52:41 -0600
From:   Rob Herring <robh@...nel.org>
To:     Raviteja Garimella <raviteja.garimella@...adcom.com>
Cc:     Mark Rutland <mark.rutland@....com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Felipe Balbi <balbi@...nel.org>, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        bcm-kernel-feedback-list@...adcom.com, linux-usb@...r.kernel.org
Subject: Re: [PATCH v2 5/6] DT bindings documentation for Broadcom IPROC USB
 Device controller.

On Tue, Feb 21, 2017 at 05:13:03PM +0530, Raviteja Garimella wrote:
> The device node is used for UDCs integrated into Broadcom's
> iProc family of SoCs'. The UDC is based on Synopsys Designware
> Cores AHB Subsystem USB Device Controller IP.

For subject:
dt-bindings: usb: Add Broadcom IPROC USB Device controller

> 
> Signed-off-by: Raviteja Garimella <raviteja.garimella@...adcom.com>
> ---
>  Documentation/devicetree/bindings/usb/iproc-udc.txt | 21 +++++++++++++++++++++
>  1 file changed, 21 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/iproc-udc.txt
> 
> diff --git a/Documentation/devicetree/bindings/usb/iproc-udc.txt b/Documentation/devicetree/bindings/usb/iproc-udc.txt
> new file mode 100644
> index 0000000..c2ce803
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/iproc-udc.txt
> @@ -0,0 +1,21 @@
> +Broadcom IPROC USB Device controller.
> +
> +The device node is used for UDCs integrated into Broadcom's
> +iProc family (Northstar2, Cygnus) of SoCs'. The UDC is based
> +on Synopsys Designware Cores AHB Subsystem Device Controller
> +IP.
> +
> +Required properties:
> + - compatible: Add the compatibility strings for supported platforms.
> +   For Broadcom NS2 platform, add "brcm,ns2-udc".
> +   For Broadcom Cygnus platform, add "brcm,cygnus-udc".
> + - reg: Offset and length of UDC register set
> + - interrupts: description of interrupt line
> + - phys: phandle to phy node.
> +
> +Example:
> +	udc_dwc: usb@...e0000 {
> +		compatible = "brcm,ns2-udc", "brcm,cygnus-udc";

This doesn't look right?

> +		reg = <0x664e0000 0x2000>;
> +		interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
> +		phys = <&usbdrd_phy>;
> -- 
> 2.1.0
>