| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <85c405428279c1c8e062d825112db800342a98ca.1488287639.git.peter.senna@collabora.com>
Date: Tue, 28 Feb 2017 15:28:10 +0100
From: Peter Senna Tschudin <peter.senna@...labora.com>
To: airlied@...ux.ie, architt@...eaurora.org,
akpm@...ux-foundation.org, daniel.vetter@...ll.ch,
davem@...emloft.net, devicetree@...r.kernel.org,
dri-devel@...ts.freedesktop.org, enric.balletbo@...labora.com,
eballetbo@...il.com, galak@...eaurora.org,
gregkh@...uxfoundation.org, heiko@...ech.de,
ijc+devicetree@...lion.org.uk, javier@...hile0.org, jslaby@...e.cz,
kernel@...gutronix.de, linux-arm-kernel@...ts.infradead.org,
linux@...linux.org.uk, linux-kernel@...r.kernel.org,
linux@...ck-us.net, mark.rutland@....com, martin.donnelly@...com,
martyn.welch@...labora.co.uk, mchehab@....samsung.com,
pawel.moll@....com, peter.senna@...labora.com,
peter.senna@...il.com, p.zabel@...gutronix.de,
thierry.reding@...il.com, rmk+kernel@...linux.org.uk,
robh+dt@...nel.org, shawnguo@...nel.org, tiwai@...e.com,
treding@...dia.com, ykk@...k-chips.com,
laurent.pinchart@...asonboard.com
Cc: Rob Herring <robh@...nel.org>,
Fabio Estevam <fabio.estevam@....com>,
Rask Ingemann Lambertsen <ccc94453@....cybercity.dk>
Subject: [PATCH V2 1/4] dt-bindings: display: megachips-stdpxxxx-ge-b850v3-fw
Devicetree binding documentation for the second video output
of the GE B850v3:
STDP4028-ge-b850v3-fw bridges (LVDS-DP)
STDP2690-ge-b850v3-fw bridges (DP-DP++)
Added entry for MegaChips at:
Documentation/devicetree/bindings/vendor-prefixes.txt
Cc: Laurent Pinchart <laurent.pinchart@...asonboard.com>
Cc: Martyn Welch <martyn.welch@...labora.co.uk>
Cc: Martin Donnelly <martin.donnelly@...com>
Cc: Javier Martinez Canillas <javier@...hile0.org>
Cc: Enric Balletbo i Serra <enric.balletbo@...labora.com>
Cc: Philipp Zabel <p.zabel@...gutronix.de>
Cc: Rob Herring <robh@...nel.org>
Cc: Fabio Estevam <fabio.estevam@....com>
Signed-off-by: Peter Senna Tschudin <peter.senna@...labora.com>
---
Changes from V1:
- New subject
- Moved binding documentation from bindings/video/ to bindings/display/bridge/
- Reworded to describe hardware instead of the driver
- Reformated the bindings to have one set of required properties per device
- Updated reg description
- Defined number of ports and what they are for
.../bridge/megachips-stdpxxxx-ge-b850v3-fw.txt | 94 ++++++++++++++++++++++
.../devicetree/bindings/vendor-prefixes.txt | 1 +
2 files changed, 95 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
diff --git a/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt b/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
new file mode 100644
index 0000000..7baa658
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
@@ -0,0 +1,94 @@
+Drivers for the second video output of the GE B850v3:
+ STDP4028-ge-b850v3-fw bridges (LVDS-DP)
+ STDP2690-ge-b850v3-fw bridges (DP-DP++)
+
+The video processing pipeline on the second output on the GE B850v3:
+
+ Host -> LVDS|--(STDP4028)--|DP -> DP|--(STDP2690)--|DP++ -> Video output
+
+Each bridge has a dedicated flash containing firmware for supporting the custom
+design. The result is that, in this design, neither the STDP4028 nor the
+STDP2690 behave as the stock bridges would. The compatible strings include the
+suffix "-ge-b850v3-fw" to make it clear that the driver is for the bridges with
+the firmware specific for the GE B850v3.
+
+The hardware do not provide control over the video processing pipeline, as the
+two bridges behaves as a single one. The only interfaces exposed by the
+hardware are EDID, HPD, and interrupts.
+
+stdp4028-ge-b850v3-fw required properties:
+ - compatible : "megachips,stdp4028-ge-b850v3-fw"
+ - reg : I2C bus address
+ - interrupt-parent : phandle of the interrupt controller that services
+ interrupts to the device
+ - interrupts : one interrupt should be described here, as in
+ <0 IRQ_TYPE_LEVEL_HIGH>
+ - ports : One input port(reg = <0>) and one output port(reg = <1>)
+
+stdp2690-ge-b850v3-fw required properties:
+ compatible : "megachips,stdp2690-ge-b850v3-fw"
+ - reg : I2C bus address
+ - ports : One input port(reg = <0>) and one output port(reg = <1>)
+
+Example:
+
+&mux2_i2c2 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ stdp4028@73 {
+ compatible = "megachips,stdp4028-ge-b850v3-fw";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0x73>;
+
+ interrupt-parent = <&gpio2>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ stdp4028_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ stdp4028_out: endpoint {
+ remote-endpoint = <&stdp2690_in>;
+ };
+ };
+ };
+ };
+
+ stdp2690@72 {
+ compatible = "megachips,stdp2690-ge-b850v3-fw";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0x72>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ stdp2690_in: endpoint {
+ remote-endpoint = <&stdp4028_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ stdp2690_out: endpoint {
+ /* Connector for external display */
+ };
+ };
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index ec0bfb9..4686f4b 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -178,6 +178,7 @@ maxim Maxim Integrated Products
mcube mCube
meas Measurement Specialties
mediatek MediaTek Inc.
+megachips MegaChips
melexis Melexis N.V.
melfas MELFAS Inc.
memsic MEMSIC Inc.
--
2.9.3
Powered by blists - more mailing lists