| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20170228185117.GA10378@singhal-Inspiron-5558>
Date: Wed, 1 Mar 2017 00:21:17 +0530
From: simran singhal <singhalsimran0@...il.com>
To: lars@...afoo.de
Cc: Michael.Hennerich@...log.com, jic23@...nel.org, knaack.h@....de,
pmeerw@...erw.net, gregkh@...uxfoundation.org,
linux-kernel@...r.kernel.org, linux-iio@...r.kernel.org,
devel@...verdev.osuosl.org, outreachy-kernel@...glegroups.com
Subject: [PATCH v2] staging: iio: accel: Move header file content to source
file
The contents of the header file are used only by this single
source file. Move content into .c and remove .h.
Signed-off-by: simran singhal <singhalsimran0@...il.com>
---
v2:
-Removing ifndef and define
drivers/staging/iio/accel/adis16201.h | 144 -----------------------------
drivers/staging/iio/accel/adis16201_core.c | 142 +++++++++++++++++++++++++++-
2 files changed, 141 insertions(+), 145 deletions(-)
delete mode 100644 drivers/staging/iio/accel/adis16201.h
diff --git a/drivers/staging/iio/accel/adis16201.h b/drivers/staging/iio/accel/adis16201.h
deleted file mode 100644
index 64844ad..0000000
--- a/drivers/staging/iio/accel/adis16201.h
+++ /dev/null
@@ -1,144 +0,0 @@
-#ifndef SPI_ADIS16201_H_
-#define SPI_ADIS16201_H_
-
-#define ADIS16201_STARTUP_DELAY 220 /* ms */
-
-/* Flash memory write count */
-#define ADIS16201_FLASH_CNT 0x00
-
-/* Output, power supply */
-#define ADIS16201_SUPPLY_OUT 0x02
-
-/* Output, x-axis accelerometer */
-#define ADIS16201_XACCL_OUT 0x04
-
-/* Output, y-axis accelerometer */
-#define ADIS16201_YACCL_OUT 0x06
-
-/* Output, auxiliary ADC input */
-#define ADIS16201_AUX_ADC 0x08
-
-/* Output, temperature */
-#define ADIS16201_TEMP_OUT 0x0A
-
-/* Output, x-axis inclination */
-#define ADIS16201_XINCL_OUT 0x0C
-
-/* Output, y-axis inclination */
-#define ADIS16201_YINCL_OUT 0x0E
-
-/* Calibration, x-axis acceleration offset */
-#define ADIS16201_XACCL_OFFS 0x10
-
-/* Calibration, y-axis acceleration offset */
-#define ADIS16201_YACCL_OFFS 0x12
-
-/* x-axis acceleration scale factor */
-#define ADIS16201_XACCL_SCALE 0x14
-
-/* y-axis acceleration scale factor */
-#define ADIS16201_YACCL_SCALE 0x16
-
-/* Calibration, x-axis inclination offset */
-#define ADIS16201_XINCL_OFFS 0x18
-
-/* Calibration, y-axis inclination offset */
-#define ADIS16201_YINCL_OFFS 0x1A
-
-/* x-axis inclination scale factor */
-#define ADIS16201_XINCL_SCALE 0x1C
-
-/* y-axis inclination scale factor */
-#define ADIS16201_YINCL_SCALE 0x1E
-
-/* Alarm 1 amplitude threshold */
-#define ADIS16201_ALM_MAG1 0x20
-
-/* Alarm 2 amplitude threshold */
-#define ADIS16201_ALM_MAG2 0x22
-
-/* Alarm 1, sample period */
-#define ADIS16201_ALM_SMPL1 0x24
-
-/* Alarm 2, sample period */
-#define ADIS16201_ALM_SMPL2 0x26
-
-/* Alarm control */
-#define ADIS16201_ALM_CTRL 0x28
-
-/* Auxiliary DAC data */
-#define ADIS16201_AUX_DAC 0x30
-
-/* General-purpose digital input/output control */
-#define ADIS16201_GPIO_CTRL 0x32
-
-/* Miscellaneous control */
-#define ADIS16201_MSC_CTRL 0x34
-
-/* Internal sample period (rate) control */
-#define ADIS16201_SMPL_PRD 0x36
-
-/* Operation, filter configuration */
-#define ADIS16201_AVG_CNT 0x38
-
-/* Operation, sleep mode control */
-#define ADIS16201_SLP_CNT 0x3A
-
-/* Diagnostics, system status register */
-#define ADIS16201_DIAG_STAT 0x3C
-
-/* Operation, system command register */
-#define ADIS16201_GLOB_CMD 0x3E
-
-/* MSC_CTRL */
-
-/* Self-test enable */
-#define ADIS16201_MSC_CTRL_SELF_TEST_EN BIT(8)
-
-/* Data-ready enable: 1 = enabled, 0 = disabled */
-#define ADIS16201_MSC_CTRL_DATA_RDY_EN BIT(2)
-
-/* Data-ready polarity: 1 = active high, 0 = active low */
-#define ADIS16201_MSC_CTRL_ACTIVE_HIGH BIT(1)
-
-/* Data-ready line selection: 1 = DIO1, 0 = DIO0 */
-#define ADIS16201_MSC_CTRL_DATA_RDY_DIO1 BIT(0)
-
-/* DIAG_STAT */
-
-/* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */
-#define ADIS16201_DIAG_STAT_ALARM2 BIT(9)
-
-/* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */
-#define ADIS16201_DIAG_STAT_ALARM1 BIT(8)
-
-/* SPI communications failure */
-#define ADIS16201_DIAG_STAT_SPI_FAIL_BIT 3
-
-/* Flash update failure */
-#define ADIS16201_DIAG_STAT_FLASH_UPT_BIT 2
-
-/* Power supply above 3.625 V */
-#define ADIS16201_DIAG_STAT_POWER_HIGH_BIT 1
-
-/* Power supply below 3.15 V */
-#define ADIS16201_DIAG_STAT_POWER_LOW_BIT 0
-
-/* GLOB_CMD */
-
-#define ADIS16201_GLOB_CMD_SW_RESET BIT(7)
-#define ADIS16201_GLOB_CMD_FACTORY_CAL BIT(1)
-
-#define ADIS16201_ERROR_ACTIVE BIT(14)
-
-enum adis16201_scan {
- ADIS16201_SCAN_ACC_X,
- ADIS16201_SCAN_ACC_Y,
- ADIS16201_SCAN_INCLI_X,
- ADIS16201_SCAN_INCLI_Y,
- ADIS16201_SCAN_SUPPLY,
- ADIS16201_SCAN_AUX_ADC,
- ADIS16201_SCAN_TEMP,
-};
-
-#endif /* SPI_ADIS16201_H_ */
diff --git a/drivers/staging/iio/accel/adis16201_core.c b/drivers/staging/iio/accel/adis16201_core.c
index 7963d4a..dcf8463 100644
--- a/drivers/staging/iio/accel/adis16201_core.c
+++ b/drivers/staging/iio/accel/adis16201_core.c
@@ -20,7 +20,147 @@
#include <linux/iio/buffer.h>
#include <linux/iio/imu/adis.h>
-#include "adis16201.h"
+#define ADIS16201_STARTUP_DELAY 220 /* ms */
+
+/* Flash memory write count */
+#define ADIS16201_FLASH_CNT 0x00
+
+/* Output, power supply */
+#define ADIS16201_SUPPLY_OUT 0x02
+
+/* Output, x-axis accelerometer */
+#define ADIS16201_XACCL_OUT 0x04
+
+/* Output, y-axis accelerometer */
+#define ADIS16201_YACCL_OUT 0x06
+
+/* Output, auxiliary ADC input */
+#define ADIS16201_AUX_ADC 0x08
+
+/* Output, temperature */
+#define ADIS16201_TEMP_OUT 0x0A
+
+/* Output, x-axis inclination */
+#define ADIS16201_XINCL_OUT 0x0C
+
+/* Output, y-axis inclination */
+#define ADIS16201_YINCL_OUT 0x0E
+
+/* Calibration, x-axis acceleration offset */
+#define ADIS16201_XACCL_OFFS 0x10
+
+/* Calibration, y-axis acceleration offset */
+#define ADIS16201_YACCL_OFFS 0x12
+
+/* x-axis acceleration scale factor */
+#define ADIS16201_XACCL_SCALE 0x14
+
+/* y-axis acceleration scale factor */
+#define ADIS16201_YACCL_SCALE 0x16
+
+/* Calibration, x-axis inclination offset */
+#define ADIS16201_XINCL_OFFS 0x18
+
+/* Calibration, y-axis inclination offset */
+#define ADIS16201_YINCL_OFFS 0x1A
+
+/* x-axis inclination scale factor */
+#define ADIS16201_XINCL_SCALE 0x1C
+
+/* y-axis inclination scale factor */
+#define ADIS16201_YINCL_SCALE 0x1E
+
+/* Alarm 1 amplitude threshold */
+#define ADIS16201_ALM_MAG1 0x20
+
+/* Alarm 2 amplitude threshold */
+#define ADIS16201_ALM_MAG2 0x22
+
+/* Alarm 1, sample period */
+#define ADIS16201_ALM_SMPL1 0x24
+
+/* Alarm 2, sample period */
+#define ADIS16201_ALM_SMPL2 0x26
+
+/* Alarm control */
+#define ADIS16201_ALM_CTRL 0x28
+
+/* Auxiliary DAC data */
+#define ADIS16201_AUX_DAC 0x30
+
+/* General-purpose digital input/output control */
+#define ADIS16201_GPIO_CTRL 0x32
+
+/* Miscellaneous control */
+#define ADIS16201_MSC_CTRL 0x34
+
+/* Internal sample period (rate) control */
+#define ADIS16201_SMPL_PRD 0x36
+
+/* Operation, filter configuration */
+#define ADIS16201_AVG_CNT 0x38
+
+/* Operation, sleep mode control */
+#define ADIS16201_SLP_CNT 0x3A
+
+/* Diagnostics, system status register */
+#define ADIS16201_DIAG_STAT 0x3C
+
+/* Operation, system command register */
+#define ADIS16201_GLOB_CMD 0x3E
+
+/* MSC_CTRL */
+
+/* Self-test enable */
+#define ADIS16201_MSC_CTRL_SELF_TEST_EN BIT(8)
+
+/* Data-ready enable: 1 = enabled, 0 = disabled */
+#define ADIS16201_MSC_CTRL_DATA_RDY_EN BIT(2)
+
+/* Data-ready polarity: 1 = active high, 0 = active low */
+#define ADIS16201_MSC_CTRL_ACTIVE_HIGH BIT(1)
+
+/* Data-ready line selection: 1 = DIO1, 0 = DIO0 */
+#define ADIS16201_MSC_CTRL_DATA_RDY_DIO1 BIT(0)
+
+/* DIAG_STAT */
+
+/* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */
+#define ADIS16201_DIAG_STAT_ALARM2 BIT(9)
+
+/* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */
+#define ADIS16201_DIAG_STAT_ALARM1 BIT(8)
+
+/* SPI communications failure */
+#define ADIS16201_DIAG_STAT_SPI_FAIL_BIT 3
+
+/* Flash update failure */
+#define ADIS16201_DIAG_STAT_FLASH_UPT_BIT 2
+
+/* Power supply above 3.625 V */
+#define ADIS16201_DIAG_STAT_POWER_HIGH_BIT 1
+
+/* Power supply below 3.15 V */
+#define ADIS16201_DIAG_STAT_POWER_LOW_BIT 0
+
+/* GLOB_CMD */
+
+#define ADIS16201_GLOB_CMD_SW_RESET BIT(7)
+#define ADIS16201_GLOB_CMD_FACTORY_CAL BIT(1)
+
+#define ADIS16201_ERROR_ACTIVE BIT(14)
+
+enum adis16201_scan {
+ ADIS16201_SCAN_ACC_X,
+ ADIS16201_SCAN_ACC_Y,
+ ADIS16201_SCAN_INCLI_X,
+ ADIS16201_SCAN_INCLI_Y,
+ ADIS16201_SCAN_SUPPLY,
+ ADIS16201_SCAN_AUX_ADC,
+ ADIS16201_SCAN_TEMP,
+};
+
+#endif /* SPI_ADIS16201_H_ */
static const u8 adis16201_addresses[] = {
[ADIS16201_SCAN_ACC_X] = ADIS16201_XACCL_OFFS,
--
2.7.4
Powered by blists - more mailing lists