Message-Id: <96e4715857cf184536ef46e6ea92465f58a7b12d.1488345270.git.len.brown@intel.com>
Date:   Wed,  1 Mar 2017 00:27:25 -0500
From:   Len Brown <lenb@...nel.org>
To:     linux-pm@...r.kernel.org
Cc:     linux-kernel@...r.kernel.org, Len Brown <len.brown@...el.com>
Subject: [PATCH 21/44] tools/power turbostat: print system config, unless --quiet

From: Len Brown <len.brown@...el.com>

Some users want turbostat to tell them everything, by default.
Some users want turbostat to be quiet, by default.

I find that I'm in the 1st camp, and so I've never liked
needing to type the --debug parameter to decode the system
configuration.

So here we change the default and print the system configuration,
by default.  (The --debug option is now un-documented, though
it does still exist for debugging turbostat internals)

When you do not want to see the system configuration
header, use the new "--quiet" option.

Signed-off-by: Len Brown <len.brown@...el.com>
---
 tools/power/x86/turbostat/turbostat.8 |   7 +--
 tools/power/x86/turbostat/turbostat.c | 105 +++++++++++++++++-----------------
 2 files changed, 52 insertions(+), 60 deletions(-)

diff --git a/tools/power/x86/turbostat/turbostat.8 b/tools/power/x86/turbostat/turbostat.8
index e8fb1e02d121..a08de27713e0 100644
--- a/tools/power/x86/turbostat/turbostat.8
+++ b/tools/power/x86/turbostat/turbostat.8
@@ -53,8 +53,7 @@ name as necessary to disambiguate it from others is necessary.  Note that option
 .PP
 \fB--Dump\fP displays the raw counter values.
 .PP
-\fB--debug\fP displays additional system configuration information.  Invoking this parameter
-more than once may also enable internal turbostat debug information.
+\fB--quiet\fP Do not decode and print the system configuration header information.
 .PP
 \fB--interval seconds\fP overrides the default 5.0 second measurement interval.
 .PP
@@ -124,7 +123,6 @@ Or a command may be specified as in "FORK EXAMPLE" below.
 
 .fi
 .SH DEBUG EXAMPLE
-The "--debug" option prints additional system information before measurements:
 
 The first row of statistics is a summary for the entire system.
 For residency % columns, the summary is a weighted average.
@@ -188,9 +186,6 @@ should be sustainable on all CPUs indefinitely, given nominal power and cooling.
 The remaining rows show what maximum turbo frequency is possible
 depending on the number of idle cores.  Note that not all information is
 available on all processors.
-.PP
-The --debug option adds additional columns to the measurement ouput, including CPU idle power-state residency processor temperature sensor readinds.
-See the field definitions above.
 .SH FORK EXAMPLE
 If turbostat is invoked with a command, it will fork that command
 and output the statistics gathered after the command exits.
diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
index c50b452a404e..6867557596af 100644
--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -49,6 +49,7 @@ FILE *outf;
 int *fd_percpu;
 struct timespec interval_ts = {5, 0};
 unsigned int debug;
+unsigned int quiet;
 unsigned int rapl_joules;
 unsigned int summary_only;
 unsigned int dump_only;
@@ -3114,7 +3115,7 @@ void rapl_probe(unsigned int family, unsigned int model)
 	tdp = get_tdp(model);
 
 	rapl_joule_counter_range = 0xFFFFFFFF * rapl_energy_units / tdp;
-	if (debug)
+	if (!quiet)
 		fprintf(outf, "RAPL: %.0f sec. Joule Counter Range, at %.0f Watts\n", rapl_joule_counter_range, tdp);
 
 	return;
@@ -3239,11 +3240,9 @@ int print_rapl(struct thread_data *t, struct core_data *c, struct pkg_data *p)
 	if (get_msr(cpu, MSR_RAPL_POWER_UNIT, &msr))
 		return -1;
 
-	if (debug) {
-		fprintf(outf, "cpu%d: MSR_RAPL_POWER_UNIT: 0x%08llx "
-			"(%f Watts, %f Joules, %f sec.)\n", cpu, msr,
-			rapl_power_units, rapl_energy_units, rapl_time_units);
-	}
+	fprintf(outf, "cpu%d: MSR_RAPL_POWER_UNIT: 0x%08llx (%f Watts, %f Joules, %f sec.)\n", cpu, msr,
+		rapl_power_units, rapl_energy_units, rapl_time_units);
+
 	if (do_rapl & RAPL_PKG_POWER_INFO) {
 
 		if (get_msr(cpu, MSR_PKG_POWER_INFO, &msr))
@@ -3264,7 +3263,7 @@ int print_rapl(struct thread_data *t, struct core_data *c, struct pkg_data *p)
 			return -9;
 
 		fprintf(outf, "cpu%d: MSR_PKG_POWER_LIMIT: 0x%08llx (%slocked)\n",
-			cpu, msr, (msr >> 63) & 1 ? "": "UN");
+			cpu, msr, (msr >> 63) & 1 ? "" : "UN");
 
 		print_power_limit_msr(cpu, msr, "PKG Limit #1");
 		fprintf(outf, "cpu%d: PKG Limit #2: %sabled (%f Watts, %f* sec, clamp %sabled)\n",
@@ -3290,40 +3289,34 @@ int print_rapl(struct thread_data *t, struct core_data *c, struct pkg_data *p)
 		if (get_msr(cpu, MSR_DRAM_POWER_LIMIT, &msr))
 			return -9;
 		fprintf(outf, "cpu%d: MSR_DRAM_POWER_LIMIT: 0x%08llx (%slocked)\n",
-				cpu, msr, (msr >> 31) & 1 ? "": "UN");
+				cpu, msr, (msr >> 31) & 1 ? "" : "UN");
 
 		print_power_limit_msr(cpu, msr, "DRAM Limit");
 	}
 	if (do_rapl & RAPL_CORE_POLICY) {
-		if (debug) {
-			if (get_msr(cpu, MSR_PP0_POLICY, &msr))
-				return -7;
+		if (get_msr(cpu, MSR_PP0_POLICY, &msr))
+			return -7;
 
-			fprintf(outf, "cpu%d: MSR_PP0_POLICY: %lld\n", cpu, msr & 0xF);
-		}
+		fprintf(outf, "cpu%d: MSR_PP0_POLICY: %lld\n", cpu, msr & 0xF);
 	}
 	if (do_rapl & RAPL_CORES_POWER_LIMIT) {
-		if (debug) {
-			if (get_msr(cpu, MSR_PP0_POWER_LIMIT, &msr))
-				return -9;
-			fprintf(outf, "cpu%d: MSR_PP0_POWER_LIMIT: 0x%08llx (%slocked)\n",
-					cpu, msr, (msr >> 31) & 1 ? "": "UN");
-			print_power_limit_msr(cpu, msr, "Cores Limit");
-		}
+		if (get_msr(cpu, MSR_PP0_POWER_LIMIT, &msr))
+			return -9;
+		fprintf(outf, "cpu%d: MSR_PP0_POWER_LIMIT: 0x%08llx (%slocked)\n",
+				cpu, msr, (msr >> 31) & 1 ? "" : "UN");
+		print_power_limit_msr(cpu, msr, "Cores Limit");
 	}
 	if (do_rapl & RAPL_GFX) {
-		if (debug) {
-			if (get_msr(cpu, MSR_PP1_POLICY, &msr))
-				return -8;
+		if (get_msr(cpu, MSR_PP1_POLICY, &msr))
+			return -8;
 
-			fprintf(outf, "cpu%d: MSR_PP1_POLICY: %lld\n", cpu, msr & 0xF);
+		fprintf(outf, "cpu%d: MSR_PP1_POLICY: %lld\n", cpu, msr & 0xF);
 
-			if (get_msr(cpu, MSR_PP1_POWER_LIMIT, &msr))
-				return -9;
-			fprintf(outf, "cpu%d: MSR_PP1_POWER_LIMIT: 0x%08llx (%slocked)\n",
-					cpu, msr, (msr >> 31) & 1 ? "": "UN");
-			print_power_limit_msr(cpu, msr, "GFX Limit");
-		}
+		if (get_msr(cpu, MSR_PP1_POWER_LIMIT, &msr))
+			return -9;
+		fprintf(outf, "cpu%d: MSR_PP1_POWER_LIMIT: 0x%08llx (%slocked)\n",
+				cpu, msr, (msr >> 31) & 1 ? "" : "UN");
+		print_power_limit_msr(cpu, msr, "GFX Limit");
 	}
 	return 0;
 }
@@ -3469,7 +3462,7 @@ double slm_bclk(void)
 	}
 	freq = slm_freq_table[i];
 
-	if (debug)
+	if (!quiet)
 		fprintf(outf, "SLM BCLK: %.1f Mhz\n", freq);
 
 	return freq;
@@ -3533,7 +3526,7 @@ int set_temperature_target(struct thread_data *t, struct core_data *c, struct pk
 
 	target_c_local = (msr >> 16) & 0xFF;
 
-	if (debug)
+	if (!quiet)
 		fprintf(outf, "cpu%d: MSR_IA32_TEMPERATURE_TARGET: 0x%08llx (%d C)\n",
 			cpu, msr, target_c_local);
 
@@ -3648,7 +3641,7 @@ void process_cpuid()
 	if (ebx == 0x756e6547 && edx == 0x49656e69 && ecx == 0x6c65746e)
 		genuine_intel = 1;
 
-	if (debug)
+	if (!quiet)
 		fprintf(outf, "CPUID(0): %.4s%.4s%.4s ",
 			(char *)&ebx, (char *)&edx, (char *)&ecx);
 
@@ -3659,7 +3652,7 @@ void process_cpuid()
 	if (family == 6 || family == 0xf)
 		model += ((fms >> 16) & 0xf) << 4;
 
-	if (debug) {
+	if (!quiet) {
 		fprintf(outf, "%d CPUID levels; family:model:stepping 0x%x:%x:%x (%d:%d:%d)\n",
 			max_level, family, model, stepping, family, model, stepping);
 		fprintf(outf, "CPUID(1): %s %s %s %s %s %s %s %s %s\n",
@@ -3721,7 +3714,7 @@ void process_cpuid()
 	has_hwp_pkg = eax & (1 << 11);
 	has_epb = ecx & (1 << 3);
 
-	if (debug)
+	if (!quiet)
 		fprintf(outf, "CPUID(6): %sAPERF, %sTURBO, %sDTS, %sPTM, %sHWP, "
 			"%sHWPnotify, %sHWPwindow, %sHWPepp, %sHWPpkg, %sEPB\n",
 			has_aperf ? "" : "No-",
@@ -3735,11 +3728,11 @@ void process_cpuid()
 			has_hwp_pkg ? "" : "No-",
 			has_epb ? "" : "No-");
 
-	if (debug)
+	if (!quiet)
 		decode_misc_enable_msr();
 
 
-	if (max_level >= 0x7 && debug) {
+	if (max_level >= 0x7 && !quiet) {
 		int has_sgx;
 
 		ecx = 0;
@@ -3765,7 +3758,7 @@ void process_cpuid()
 
 		if (ebx_tsc != 0) {
 
-			if (debug && (ebx != 0))
+			if (!quiet && (ebx != 0))
 				fprintf(outf, "CPUID(0x15): eax_crystal: %d ebx_tsc: %d ecx_crystal_hz: %d\n",
 					eax_crystal, ebx_tsc, crystal_hz);
 
@@ -3790,7 +3783,7 @@ void process_cpuid()
 
 			if (crystal_hz) {
 				tsc_hz =  (unsigned long long) crystal_hz * ebx_tsc / eax_crystal;
-				if (debug)
+				if (!quiet)
 					fprintf(outf, "TSC: %lld MHz (%d Hz * %d / %d / 1000000)\n",
 						tsc_hz / 1000000, crystal_hz, ebx_tsc,  eax_crystal);
 			}
@@ -3805,7 +3798,7 @@ void process_cpuid()
 		base_mhz = max_mhz = bus_mhz = edx = 0;
 
 		__cpuid(0x16, base_mhz, max_mhz, bus_mhz, edx);
-		if (debug)
+		if (!quiet)
 			fprintf(outf, "CPUID(0x16): base_mhz: %d max_mhz: %d bus_mhz: %d\n",
 				base_mhz, max_mhz, bus_mhz);
 	}
@@ -3845,16 +3838,16 @@ void process_cpuid()
 	do_slm_cstates = is_slm(family, model);
 	do_knl_cstates  = is_knl(family, model);
 
-	if (debug)
+	if (!quiet)
 		decode_misc_pwr_mgmt_msr();
 
-	if (debug && has_slv_msrs(family, model))
+	if (!quiet && has_slv_msrs(family, model))
 		decode_c6_demotion_policy_msr();
 
 	rapl_probe(family, model);
 	perf_limit_reasons_probe(family, model);
 
-	if (debug)
+	if (!quiet)
 		dump_cstate_pstate_config_info(family, model);
 
 	if (has_skl_msrs(family, model))
@@ -3866,7 +3859,7 @@ void process_cpuid()
 	if (!access("/sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz", R_OK))
 		BIC_PRESENT(BIC_GFXMHz);
 
-	if (debug)
+	if (!quiet)
 		decode_misc_feature_control();
 
 	return;
@@ -3883,7 +3876,7 @@ void help()
 	"to print statistics, until interrupted.\n"
 	"--add		add a counter\n"
 	"		eg. --add msr0x10,u64,cpu,delta,MY_TSC\n"
-	"--debug	run in \"debug\" mode\n"
+	"--quiet	skip decoding system configuration header\n"
 	"--interval sec	Override default 5-second measurement interval\n"
 	"--help		print this help message\n"
 	"--out file	create or truncate \"file\" for all output\n"
@@ -4136,24 +4129,24 @@ void turbostat_init()
 	process_cpuid();
 
 
-	if (debug)
+	if (!quiet)
 		for_all_cpus(print_hwp, ODD_COUNTERS);
 
-	if (debug)
+	if (!quiet)
 		for_all_cpus(print_epb, ODD_COUNTERS);
 
-	if (debug)
+	if (!quiet)
 		for_all_cpus(print_perf_limit, ODD_COUNTERS);
 
-	if (debug)
+	if (!quiet)
 		for_all_cpus(print_rapl, ODD_COUNTERS);
 
 	for_all_cpus(set_temperature_target, ODD_COUNTERS);
 
-	if (debug)
+	if (!quiet)
 		for_all_cpus(print_thermal, ODD_COUNTERS);
 
-	if (debug && do_irtl_snb)
+	if (!quiet && do_irtl_snb)
 		print_irtl();
 }
 
@@ -4429,7 +4422,7 @@ void cmdline(int argc, char **argv)
 	static struct option long_options[] = {
 		{"add",		required_argument,	0, 'a'},
 		{"Dump",	no_argument,		0, 'D'},
-		{"debug",	no_argument,		0, 'd'},
+		{"debug",	no_argument,		0, 'd'},	/* internal, not documented */
 		{"interval",	required_argument,	0, 'i'},
 		{"help",	no_argument,		0, 'h'},
 		{"hide",	required_argument,	0, 'H'},	// meh, -h taken by --help
@@ -4437,6 +4430,7 @@ void cmdline(int argc, char **argv)
 		{"out",		required_argument,	0, 'o'},
 		{"Package",	no_argument,		0, 'p'},
 		{"processor",	no_argument,		0, 'p'},
+		{"quiet",	no_argument,		0, 'q'},
 		{"show",	required_argument,	0, 's'},
 		{"Summary",	no_argument,		0, 'S'},
 		{"TCC",		required_argument,	0, 'T'},
@@ -4446,7 +4440,7 @@ void cmdline(int argc, char **argv)
 
 	progname = argv[0];
 
-	while ((opt = getopt_long_only(argc, argv, "+C:c:Ddhi:JM:m:o:PpST:v",
+	while ((opt = getopt_long_only(argc, argv, "+C:c:Ddhi:JM:m:o:PpqST:v",
 				long_options, &option_index)) != -1) {
 		switch (opt) {
 		case 'a':
@@ -4491,6 +4485,9 @@ void cmdline(int argc, char **argv)
 		case 'p':
 			show_core_only++;
 			break;
+		case 'q':
+			quiet = 1;
+			break;
 		case 's':
 			parse_show_hide(optarg, SHOW_LIST);
 			break;
@@ -4514,7 +4511,7 @@ int main(int argc, char **argv)
 
 	cmdline(argc, argv);
 
-	if (debug)
+	if (!quiet)
 		print_version();
 
 	turbostat_init();
-- 
2.11.0.161.g6610af872

Powered by blists - more mailing lists