linux-kernel - Re: [PATCH 4/5] ARM: dts: qcom-apq8064: Collapse usb support into one node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Tue, 28 Feb 2017 15:50:31 -0800
From:   John Stultz <john.stultz@...aro.org>
To:     Stephen Boyd <stephen.boyd@...aro.org>
Cc:     Andy Gross <andy.gross@...aro.org>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        lkml <linux-kernel@...r.kernel.org>,
        "linux-arm-msm@...r.kernel.org" <linux-arm-msm@...r.kernel.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
        Nicolas Dechesne <nicolas.dechesne@...aro.org>
Subject: Re: [PATCH 4/5] ARM: dts: qcom-apq8064: Collapse usb support into one node

On Thu, Jan 26, 2017 at 4:47 PM, Stephen Boyd <stephen.boyd@...aro.org> wrote:
> We currently have three device nodes for the same USB hardware
> block, as evident by the reuse of the same reg address multiple
> times. Now that the chipidea driver fully supports OTG with the
> MSM wrapper we can collapse the three nodes into one USB device
> node, reflecting the true nature of the hardware.
>
> Since we're here, we also mark the irq trigger flags correctly,
> as IRQ_TYPE_LEVEL_HIGH instead of IRQ_TYPE_NONE.
>
> Cc: Bjorn Andersson <bjorn.andersson@...aro.org>
> Cc: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
> Cc: Nicolas Dechesne <nicolas.dechesne@...aro.org>
> Cc: John Stultz <john.stultz@...aro.org>
> Signed-off-by: Stephen Boyd <stephen.boyd@...aro.org>


Applies with noise now, but I was able to get USB working with this
and some changes to my config.

Hotplug still doesn't work, but that was the same situation before as
well, so I need to dig on that.

So..
Tested-by: John Stultz <john.stultz@...aro.org>

thanks
-john