[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <8b22ae13-f197-4642-53b7-d5fcc63c082f@rock-chips.com>
Date: Thu, 2 Mar 2017 09:12:52 +0800
From: Shawn Lin <shawn.lin@...k-chips.com>
To: Guenter Roeck <linux@...ck-us.net>,
Ulf Hansson <ulf.hansson@...aro.org>
Cc: shawn.lin@...k-chips.com, linux-mmc@...r.kernel.org,
linux-kernel@...r.kernel.org,
Anssi Hannula <anssi.hannula@...wise.fi>,
Douglas Anderson <dianders@...omium.org>,
Brian Norris <briannorris@...omium.org>
Subject: Re: [PATCH] mmc: core: Fix access to HS400-ES devices
On 2017/3/2 6:11, Guenter Roeck wrote:
> HS400-ES devices fail to initialize with the following error messages.
>
> mmc1: power class selection to bus width 8 ddr 0 failed
> mmc1: error -110 whilst initialising MMC card
>
> This was seen on Samsung Chromebook Plus. Code analysis points to
> commit 3d4ef329757c ("mmc: core: fix multi-bit bus width without
> high-speed mode"), which attempts to set the bus width for all but
> HS200 devices unconditionally. However, for HS400-ES, the bus width
> is already selected.
>
Thanks Guenter for catching this early!
Well, I wasn't cc'ed for that patch and it was queued for just one day
without fully reviewed. And Doug pointed out the key point here, so,
Reviewed-by: Shawn Lin <shawn.lin@...k-chip.com>
btw, I think kernelci need some rk3399 platforms with hs400es
and CQ engine support for future test. I will try to find a way
to help kernelci to get some boards if possible..
> Cc: Anssi Hannula <anssi.hannula@...wise.fi>
> Cc: Douglas Anderson <dianders@...omium.org>
> Cc: Brian Norris <briannorris@...omium.org>
> Fixes: 3d4ef329757c ("mmc: core: fix multi-bit bus width ...")
> Signed-off-by: Guenter Roeck <linux@...ck-us.net>
> ---
> drivers/mmc/core/mmc.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
> index 7fd722868875..b502601df228 100644
> --- a/drivers/mmc/core/mmc.c
> +++ b/drivers/mmc/core/mmc.c
> @@ -1730,7 +1730,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
> err = mmc_select_hs400(card);
> if (err)
> goto free_card;
> - } else {
> + } else if (!mmc_card_hs400es(card)) {
> /* Select the desired bus width optionally */
> err = mmc_select_bus_width(card);
> if (err > 0 && mmc_card_hs(card)) {
>
--
Best Regards
Shawn Lin
Powered by blists - more mailing lists