linux-kernel - Re: [PATCHv2] omap3isp: add support for CSI1 bus

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Sat, 4 Mar 2017 17:39:46 +0200
From:   Sakari Ailus <sakari.ailus@....fi>
To:     Pavel Machek <pavel@....cz>
Cc:     Laurent Pinchart <laurent.pinchart@...asonboard.com>,
        mchehab@...nel.org, kernel list <linux-kernel@...r.kernel.org>,
        ivo.g.dimitrov.75@...il.com, sre@...nel.org, pali.rohar@...il.com,
        linux-media@...r.kernel.org
Subject: Re: [PATCHv2] omap3isp: add support for CSI1 bus

On Sat, Mar 04, 2017 at 03:03:18PM +0200, Sakari Ailus wrote:
> Hi Pavel,
> 
> On Thu, Mar 02, 2017 at 01:38:48PM +0100, Pavel Machek wrote:
> > Hi!
> > 
> > > > Ok, how about this one?
> > > > omap3isp: add rest of CSI1 support
> > > >     
> > > > CSI1 needs one more bit to be set up. Do just that.
> > > >     
> > > > It is not as straightforward as I'd like, see the comments in the code
> > > > for explanation.
> > ...
> > > > +	if (isp->phy_type == ISP_PHY_TYPE_3430) {
> > > > +		struct media_pad *pad;
> > > > +		struct v4l2_subdev *sensor;
> > > > +		const struct isp_ccp2_cfg *buscfg;
> > > > +
> > > > +		pad = media_entity_remote_pad(&ccp2->pads[CCP2_PAD_SINK]);
> > > > +		sensor = media_entity_to_v4l2_subdev(pad->entity);
> > > > +		/* Struct isp_bus_cfg has union inside */
> > > > +		buscfg = &((struct isp_bus_cfg *)sensor->host_priv)->bus.ccp2;
> > > > +
> > > > +		csiphy_routing_cfg_3430(&isp->isp_csiphy2,
> > > > +					ISP_INTERFACE_CCP2B_PHY1,
> > > > +					enable, !!buscfg->phy_layer,
> > > > +					buscfg->strobe_clk_pol);
> > > 
> > > You should do this through omap3isp_csiphy_acquire(), and not call
> > > csiphy_routing_cfg_3430() directly from here.
> > 
> > Well, unfortunately omap3isp_csiphy_acquire() does have csi2
> > assumptions hard-coded :-(.
> > 
> > This will probably fail.
> > 
> > 	        rval = omap3isp_csi2_reset(phy->csi2);
> > 	        if (rval < 0)
> > 		                goto done;
> 
> Could you try to two patches I've applied on the ccp2 branch (I'll remove
> them if there are issues).
> 
> That's compile tested for now only.

One more thing. What's needed for configuring the PHY for CCP2?

For instance, is the CSI-2 PHY regulator still needed in
omap3isp_csiphy_acquire()? One way to do this might go to see the original
driver for N900; I don't have the TRM at hand right now.

-- 
Kind regards,

Sakari Ailus
e-mail: sakari.ailus@....fi	XMPP: sailus@...iisi.org.uk