[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <f1d46b79f933df724a6750d557ebe9517b6339b5.1488876832.git-series.maxime.ripard@free-electrons.com>
Date: Tue, 7 Mar 2017 09:56:25 +0100
From: Maxime Ripard <maxime.ripard@...e-electrons.com>
To: Mike Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...eaurora.org>,
Chen-Yu Tsai <wens@...e.org>,
Maxime Ripard <maxime.ripard@...e-electrons.com>
Cc: dri-devel@...ts.freedesktop.org,
Daniel Vetter <daniel.vetter@...el.com>,
David Airlie <airlied@...ux.ie>,
Mark Rutland <mark.rutland@....com>,
Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
linux-clk@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-sunxi@...glegroups.com
Subject: [PATCH 6/15] dt-bindings: display: sun4i: Add HDMI display bindings
One of the possible output of the display pipeline, on the SoCs that have
it, is the HDMI controller.
Add a binding for it.
Signed-off-by: Maxime Ripard <maxime.ripard@...e-electrons.com>
---
Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt | 21 +++++++-
1 file changed, 21 insertions(+), 0 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
index b82c00449468..4b280672658e 100644
--- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
+++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
@@ -4,6 +4,27 @@ Allwinner A10 Display Pipeline
The Allwinner A10 Display pipeline is composed of several components
that are going to be documented below:
+HDMI Encoder
+------------
+
+The HDMI Encoder supports the HDMI video and audio outputs, and does
+CEC. It is one end of the pipeline.
+
+Required properties:
+ - compatible: value must be one of:
+ * allwinner,sun5i-a10s-hdmi
+ - reg: base address and size of memory-mapped region
+ - clocks: phandles to the clocks feeding the HDMI encoder
+ * ahb: the HDMI interface clock
+ * mod: the HDMI module clock
+ * pll-0: the first video PLL
+ * pll-1: the second video PLL
+ - clock-names: the clock names mentioned above
+
+ - ports: A ports node with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt. The
+ first port should be the input endpoint.
+
TV Encoder
----------
--
git-series 0.8.11
Powered by blists - more mailing lists