[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAGb2v64gJ13DB3UxfG7DnJCzE+CZ02repkX8=iOQASsHw2cG5A@mail.gmail.com>
Date: Wed, 8 Mar 2017 12:25:59 +0800
From: Chen-Yu Tsai <wens@...e.org>
To: Maxime Ripard <maxime.ripard@...e-electrons.com>
Cc: Mike Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...eaurora.org>,
Chen-Yu Tsai <wens@...e.org>,
dri-devel <dri-devel@...ts.freedesktop.org>,
Daniel Vetter <daniel.vetter@...el.com>,
David Airlie <airlied@...ux.ie>,
Mark Rutland <mark.rutland@....com>,
Rob Herring <robh+dt@...nel.org>,
devicetree <devicetree@...r.kernel.org>,
linux-clk <linux-clk@...r.kernel.org>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
linux-sunxi <linux-sunxi@...glegroups.com>
Subject: Re: [PATCH 11/15] drm/sun4i: tcon: Fix tcon channel 1 backporch calculation
On Tue, Mar 7, 2017 at 4:56 PM, Maxime Ripard
<maxime.ripard@...e-electrons.com> wrote:
> It seems like what's called a backporch in the datasheet is actually the
> backporch plus the sync period. Fix that in our driver.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@...e-electrons.com>
> ---
> drivers/gpu/drm/sun4i/sun4i_tcon.c | 5 ++---
> 1 file changed, 2 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
> index 93249c5ab1e4..e44217fb4f6f 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
> +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
> @@ -240,15 +240,14 @@ void sun4i_tcon1_mode_set(struct sun4i_tcon *tcon, struct drm_encoder *encoder,
> SUN4I_TCON1_BASIC2_Y(mode->crtc_vdisplay));
>
> /* Set horizontal display timings */
> - bp = mode->crtc_htotal - mode->crtc_hsync_end;
> + bp = mode->crtc_htotal - mode->crtc_hsync_start;
> DRM_DEBUG_DRIVER("Setting horizontal total %d, backporch %d\n",
> mode->htotal, bp);
> regmap_write(tcon->regs, SUN4I_TCON1_BASIC3_REG,
> SUN4I_TCON1_BASIC3_H_TOTAL(mode->crtc_htotal) |
> SUN4I_TCON1_BASIC3_H_BACKPORCH(bp));
>
> - /* Set vertical display timings */
Why remove the comment?
Otherwise,
Acked-by: Chen-Yu Tsai <wens@...e.org>
> - bp = mode->crtc_vtotal - mode->crtc_vsync_end;
> + bp = mode->crtc_vtotal - mode->crtc_vsync_start;
> DRM_DEBUG_DRIVER("Setting vertical total %d, backporch %d\n",
> mode->vtotal, bp);
> regmap_write(tcon->regs, SUN4I_TCON1_BASIC4_REG,
> --
> git-series 0.8.11
Powered by blists - more mailing lists