linux-kernel - [PATCH v4 6/7] arm: dts: bcm283x: switch from &sdhci to &sdhost

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1488964751-22763-11-git-send-email-kraxel@redhat.com>
Date:   Wed,  8 Mar 2017 10:19:10 +0100
From:   Gerd Hoffmann <kraxel@...hat.com>
To:     linux-rpi-kernel@...ts.infradead.org
Cc:     ulf.hansson@...aro.org, robh+dt@...nel.org, mark.rutland@....com,
        lee@...nel.org, eric@...olt.net, stefan.wahren@...e.com,
        f.fainelli@...il.com, rjui@...adcom.com, sbranden@...adcom.com,
        bcm-kernel-feedback-list@...adcom.com, linux@...linux.org.uk,
        catalin.marinas@....com, will.deacon@....com,
        linux-mmc@...r.kernel.org, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        Gerd Hoffmann <kraxel@...hat.com>
Subject: [PATCH v4 6/7] arm: dts: bcm283x: switch from &sdhci to &sdhost

sdcard access with the sdhost controller is faster.

Read access (dd with 64k blocks on rpi2):
   CONFIG_MMC_SDHCI_IPROC: 11-12 MB/s
   CONFIG_MMC_BCM2835:     19-20 MB/s

Differences on write access are pretty much in the noise.

Signed-off-by: Gerd Hoffmann <kraxel@...hat.com>
Acked-by: Eric Anholt <eric@...olt.net>
---
 arch/arm/boot/dts/bcm2835-rpi.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index 8b95832..e36c392 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -65,13 +65,13 @@
 &sdhci {
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_gpio48>;
-	status = "okay";
 	bus-width = <4>;
 };
 
 &sdhost {
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdhost_gpio48>;
+	status = "okay";
 	bus-width = <4>;
 };
 
-- 
1.8.3.1