linux-kernel - Re: [PATCH v6 2/2] backlight arcxcnn devicetree bindings for ArcticSand

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <73fb917e-d71c-b094-7d33-8ccddd0ea1cf@linaro.org>
Date:   Fri, 10 Mar 2017 14:17:32 +0100
From:   Daniel Thompson <daniel.thompson@...aro.org>
To:     Olimpiu Dejeu <olimpiu@...ticsand.com>, robh@...nel.org
Cc:     lee.jones@...aro.org, linux-kernel@...r.kernel.org,
        linux-fbdev@...r.kernel.org, devicetree@...r.kernel.org,
        jingoohan1@...il.com, bdodge@...ticsand.com, joe@...ches.com,
        medasaro@...ticsand.com
Subject: Re: [PATCH v6 2/2] backlight arcxcnn devicetree bindings for
 ArcticSand

On 28/02/17 19:20, Olimpiu Dejeu wrote:
> backlight: Add devicetree bindings for the Arctic Sand backlight driver
> This patch provides devicetree bindings for the Arctic Sand
>     driver submitted in the previous patch
> Acked-by: Rob Herring <robh@...nel.org>
> Signed-off-by: Olimpiu Dejeu <olimpiu@...ticsand.com>

Acked-by: Daniel Thompson <daniel.thompson@...aro.org>

But...

This binding documentation patch should precede the code in the patch 
series (amoung other things this avoids transient checkpatch errors).


> ---
> v5 => v6:
> - Version updated to match other patch in set. No other changes.
> v4 => v5:
> - Added spaces for increased readability per Lee Jones
> v3 => v4:
> - Added spaces for increased readability per Lee Jones
> v2 => v3:
> - Version updated to match other patch in set. No other changes.
> v1 => v2:
> - Version updated to match other patch in set. No other changes.
>
>  .../bindings/leds/backlight/arcxcnn_bl.txt         | 33 ++++++++++++++++++++++
>  1 file changed, 31 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt
>
> diff --git a/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt b/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt
> new file mode 100644
> index 0000000..ecb7731
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt
> @@ -0,0 +1,33 @@
> +Binding for ArcticSand arc2c0608 LED driver
> +
> +Required properties:
> +- compatible:		should be "arc,arc2c0608"
> +- reg:			slave address
> +
> +Optional properties:
> +- default-brightness:	brightness value on boot, value from: 0-4095
> +- label:		The name of the backlight device
> +			See Documentation/devicetree/bindings/leds/common.txt
> +- led-sources:		List of enabled channels from 0 to 5.
> +			See Documentation/devicetree/bindings/leds/common.txt
> +
> +- arc,led-config-0:	setting for register ILED_CONFIG_0
> +- arc,led-config-1:	setting for register ILED_CONFIG_1
> +- arc,dim-freq:		PWM mode frequence setting (bits [3:0] used)
> +- arc,comp-config:	setting for register CONFIG_COMP
> +- arc,filter-config:	setting for register FILTER_CONFIG
> +- arc,trim-config:	setting for register IMAXTUNE
> +
> +Note: Optional properties not specified will default to values in IC EPROM
> +
> +Example:
> +
> +arc2c0608@30 {
> +	compatible = "arc,arc2c0608";
> +	reg = <0x30>;
> +	default-brightness = <500>;
> +	label = "lcd-backlight";
> +	linux,default-trigger = "backlight";
> +	led-sources = <0 1 2 5>;
> +};
> +
>