linux-kernel - [PATCH 4.9 031/153] hwmon: (it87) Do not overwrite bit 2..6 of pwm control registers

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20170310083949.004552374@linuxfoundation.org>
Date:   Fri, 10 Mar 2017 10:07:44 +0100
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Guenter Roeck <linux@...ck-us.net>
Subject: [PATCH 4.9 031/153] hwmon: (it87) Do not overwrite bit 2..6 of pwm control registers

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Guenter Roeck <linux@...ck-us.net>

commit 4c7b8ca1ae5ed9e27014732c8a918ba11a86cf09 upstream.

In IT8620E, after setting pwm control to manual, it was observed that
pwm values for fan 4..6 have reversed results (writing 0 results in fans
running at full speed, writing 255 results in fans turned off).

With the new PWM control, pwm polarity for pwm control 4..6 is specified
in its pwm control registers. Those registers are overwritten when setting
the pwm mode or the temperature mapping. Do not touch bit 2..6 of pwm
control registers on register writes to fix the problem.

Signed-off-by: Guenter Roeck <linux@...ck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>

---
 drivers/hwmon/it87.c |   37 ++++++++++++++++++++++++-------------
 1 file changed, 24 insertions(+), 13 deletions(-)

--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -1300,25 +1300,35 @@ static ssize_t set_pwm_enable(struct dev
 			it87_write_value(data, IT87_REG_FAN_MAIN_CTRL,
 					 data->fan_main_ctrl);
 		} else {
+			u8 ctrl;
+
 			/* No on/off mode, set maximum pwm value */
 			data->pwm_duty[nr] = pwm_to_reg(data, 0xff);
 			it87_write_value(data, IT87_REG_PWM_DUTY[nr],
 					 data->pwm_duty[nr]);
 			/* and set manual mode */
-			data->pwm_ctrl[nr] = has_newer_autopwm(data) ?
-					     data->pwm_temp_map[nr] :
-					     data->pwm_duty[nr];
-			it87_write_value(data, IT87_REG_PWM[nr],
-					 data->pwm_ctrl[nr]);
+			if (has_newer_autopwm(data)) {
+				ctrl = (data->pwm_ctrl[nr] & 0x7c) |
+					data->pwm_temp_map[nr];
+			} else {
+				ctrl = data->pwm_duty[nr];
+			}
+			data->pwm_ctrl[nr] = ctrl;
+			it87_write_value(data, IT87_REG_PWM[nr], ctrl);
 		}
 	} else {
-		if (val == 1)				/* Manual mode */
-			data->pwm_ctrl[nr] = has_newer_autopwm(data) ?
-					     data->pwm_temp_map[nr] :
-					     data->pwm_duty[nr];
-		else					/* Automatic mode */
-			data->pwm_ctrl[nr] = 0x80 | data->pwm_temp_map[nr];
-		it87_write_value(data, IT87_REG_PWM[nr], data->pwm_ctrl[nr]);
+		u8 ctrl;
+
+		if (has_newer_autopwm(data)) {
+			ctrl = (data->pwm_ctrl[nr] & 0x7c) |
+				data->pwm_temp_map[nr];
+			if (val != 1)
+				ctrl |= 0x80;
+		} else {
+			ctrl = (val == 1 ? data->pwm_duty[nr] : 0x80);
+		}
+		data->pwm_ctrl[nr] = ctrl;
+		it87_write_value(data, IT87_REG_PWM[nr], ctrl);
 
 		if (data->type != it8603 && nr < 3) {
 			/* set SmartGuardian mode */
@@ -1462,7 +1472,8 @@ static ssize_t set_pwm_temp_map(struct d
 	 * otherwise, just store it for later use.
 	 */
 	if (data->pwm_ctrl[nr] & 0x80) {
-		data->pwm_ctrl[nr] = 0x80 | data->pwm_temp_map[nr];
+		data->pwm_ctrl[nr] = (data->pwm_ctrl[nr] & 0xfc) |
+						data->pwm_temp_map[nr];
 		it87_write_value(data, IT87_REG_PWM[nr], data->pwm_ctrl[nr]);
 	}
 	mutex_unlock(&data->update_lock);