[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <m2r324bq9s.fsf@baylibre.com>
Date: Fri, 10 Mar 2017 16:39:27 -0800
From: Kevin Hilman <khilman@...libre.com>
To: Jerome Brunet <jbrunet@...libre.com>
Cc: Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...eaurora.org>,
Carlo Caione <carlo@...one.org>, linux-clk@...r.kernel.org,
linux-amlogic@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org
Subject: Re: [PATCH v2 0/9] clk: meson: update clock controller for audio support
Jerome Brunet <jbrunet@...libre.com> writes:
> This patchset is a first round of update to the meson clock controllers
> to bring audio support. The patchset is based on clk-next. It could be
> rebased on amlogic tree later on, if you prefer the patches to go through
> Kevin's tree.
I'd prefer these go through the clk tree, and get an immutable branch
that I can use for my stuff that goes through the arm-soc tree.
Kevin
> First patch fix an issue found while writing patch 5 (Giving ternary
> operator to SET_PARM)
>
> Following Stephen comment on the v1, patch 2 adds the const qualifiers
> missing upstream.
>
> Patches 3 and 4 put the generic muxes and divisors declaration in tables so
> the register address fixup works in the same way as the clock gates. We are
> going to add more of these clock types for audio or gpu support, so we
> can't continue to fix addresses individually like it is currently done.
>
> Patches 5 to 8 improve the support of the mpll clocks, now allowing the
> rate to be set. Among other things, the mplls are the parent clocks of the
> i2s and spdif clocks.
>
> Patch 9 expose the clock gates required to power on the i2s output.
>
> These patches have been tested on the meson gxbb p200 board, as part of the
> ongoing work to bring audio support to meson SoC family.
>
> Changes since v1 [0]:
> * Add SET_PARM fix to the series
> * Add missing const qualifiers to the clock arrays
> * No more additional patches required as SAR clocks have been merged
>
> [0]: http://lkml.kernel.org/r/20170228133002.17894-1-jbrunet@baylibre.com
>
> Jerome Brunet (9):
> clk: meson: fix SET_PARM macro
> clk: meson: add missing const qualifiers on gate arrays
> clk: meson8b: put dividers and muxes in tables
> clk: gxbb: put dividers and muxes in tables
> clk: meson: mpll: add rw operation
> clk: meson: gxbb: mpll: use rw operation
> clk: meson8b: add the mplls clocks 0, 1 and 2
> clk: meson: mpll: correct N2 maximum value
> dt-bindings: clk: gxbb: expose i2s output clock gates
>
> drivers/clk/meson/clk-mpll.c | 152 ++++++++++++++++++++++++++++++++--
> drivers/clk/meson/clkc.h | 6 +-
> drivers/clk/meson/gxbb.c | 66 ++++++++++++---
> drivers/clk/meson/gxbb.h | 10 +--
> drivers/clk/meson/meson8b.c | 127 ++++++++++++++++++++++++++--
> drivers/clk/meson/meson8b.h | 20 ++++-
> include/dt-bindings/clock/gxbb-clkc.h | 5 ++
> 7 files changed, 356 insertions(+), 30 deletions(-)
Powered by blists - more mailing lists