linux-kernel - [PATCH 0/2] ARM: dts: sunxi: Add CAN node and can0_pins

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Sun, 12 Mar 2017 14:28:09 +0100
From:   Patrick Menschel <menschel.p@...teo.de>
To:     robh+dt@...nel.org, mark.rutland@....com, linux@...linux.org.uk,
        maxime.ripard@...e-electrons.com, wens@...e.org,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org, linux-can@...r.kernel.org
Cc:     Patrick Menschel <menschel.p@...teo.de>
Subject: [PATCH 0/2] ARM: dts: sunxi: Add CAN node and can0_pins_a pinctrl setting

The Allwinner A10/A20 SoCs have an on-board CAN (Controller Area Network)
controller. This patch adds the CAN core to the SoC's include files,
sun4i-a10.dtsi and sun7i-a20.dtsi.

On linux-can mailing list was a discussion about updating the device tree bindings
https://lkml.org/lkml/2015/9/17/220
but it did not progress past writing the documentation file.
Documentation/devicetree/bindings/net/can/sun4i_can.txt

The CAN controller can be enabled in a board specific dts file as
described in the documentation file or by using a device tree overlay.

I have tested the patch on a Banana Pi (A20 SoC) with mainline kernel 4.9.13.

Patrick Menschel (2):
  ARM: dts: sun4i: Add CAN node and can0_pins_a pinctrl settings
  ARM: dts: sun7i: Add CAN node and can0_pins_a pinctrl settings

 arch/arm/boot/dts/sun4i-a10.dtsi | 15 +++++++++++++++
 arch/arm/boot/dts/sun7i-a20.dtsi | 15 +++++++++++++++
 2 files changed, 30 insertions(+)

-- 
1.9.1