[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170313084003.14416-1-hdegoede@redhat.com>
Date: Mon, 13 Mar 2017 09:40:03 +0100
From: Hans de Goede <hdegoede@...hat.com>
To: MyungJoo Ham <myungjoo.ham@...sung.com>,
Chanwoo Choi <cw00.choi@...sung.com>,
Chen-Yu Tsai <wens@...e.org>
Cc: Hans de Goede <hdegoede@...hat.com>, linux-kernel@...r.kernel.org,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Subject: [PATCH v2] extcon: int3496: Set the id pin to direction-input if necessary
With the new more strict ACPI gpio code the dsdt's IoRestriction
flags are honored on gpiod_get, but in some dsdt's it is wrong,
so explicitly call gpiod_direction_input on the id gpio if
necessary.
This fixes the following errors when the int3496 code is used
together with the new more strict ACPI gpio code:
[ 2382.484415] gpio gpiochip1: (INT33FF:01): gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ
[ 2382.484425] gpio gpiochip1: (INT33FF:01): unable to lock HW IRQ 3 for IRQ
[ 2382.484429] genirq: Failed to request resources for INT3496:00 (irq 174) on irqchip chv-gpio
[ 2382.484518] intel-int3496 INT3496:00: can't request IRQ for USB ID GPIO: -22
[ 2382.500359] intel-int3496: probe of INT3496:00 failed with error -22
Cc: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@...hat.com>
---
Changes in v2:
-Warn about firmware bug when the dsdt's IoRestriction does not allow input
---
drivers/extcon/extcon-intel-int3496.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/extcon/extcon-intel-int3496.c b/drivers/extcon/extcon-intel-int3496.c
index b8ac947..18801eb 100644
--- a/drivers/extcon/extcon-intel-int3496.c
+++ b/drivers/extcon/extcon-intel-int3496.c
@@ -113,6 +113,10 @@ static int int3496_probe(struct platform_device *pdev)
dev_err(dev, "can't request USB ID GPIO: %d\n", ret);
return ret;
}
+ if (gpiod_get_direction(data->gpio_usb_id) != GPIOF_DIR_IN) {
+ dev_warn(dev, "firmware bug USB ID GPIO not in input mode, fixing\n");
+ gpiod_direction_input(data->gpio_usb_id);
+ }
data->usb_id_irq = gpiod_to_irq(data->gpio_usb_id);
if (data->usb_id_irq < 0) {
--
2.9.3
Powered by blists - more mailing lists