linux-kernel - Re: [PATCH 1/2] doc: Add bindings document for Xilinx LogiCore PR Decoupler

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <91f745a9-5ab5-345c-3e46-cac7191012f9@xilinx.com>
Date:   Mon, 13 Mar 2017 11:29:06 +0100
From:   Michal Simek <michal.simek@...inx.com>
To:     Moritz Fischer <mdf@...nel.org>, <linux-fpga@...r.kernel.org>
CC:     <robh+dt@...nel.org>, <mark.rutland@....com>,
        <linux-arm-kernel@...ts.infradead.org>,
        Michal Simek <michal.simek@...inx.com>,
        Sören Brinkmann <soren.brinkmann@...inx.com>,
        <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>
Subject: Re: [PATCH 1/2] doc: Add bindings document for Xilinx LogiCore PR
 Decoupler

On 10.3.2017 22:30, Moritz Fischer wrote:
> This adds the binding documentation for the Xilinx LogiCORE PR
> Decoupler soft core.
> 
> Signed-off-by: Moritz Fischer <mdf@...nel.org>
> Cc: Michal Simek <michal.simek@...inx.com>
> Cc: Sören Brinkmann <soren.brinkmann@...inx.com>
> Cc: linux-kernel@...r.kernel.org
> Cc: devicetree@...r.kernel.org
> ---
>  .../bindings/fpga/xilinx-pr-decoupler.txt          | 24 ++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
> 
> diff --git a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
> new file mode 100644
> index 0000000..b82b928
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
> @@ -0,0 +1,24 @@
> +Xilinx LogiCORE Partial Reconfig Decoupler Softcore
> +
> +The Xilinx LogiCORE Partial Reconfig Decoupler  manages one or more
> +decouplers / fpga bridges.
> +The controller can decouple/disable the bridges which prevents signal
> +changes from passing through the bridge.  The controller can also
> +couple /enable the bridges which allows traffic to pass through the
> +bridge normally.
> +
> +Required properties:
> +- compatible		: Should contain "xlnx,pr-decoupler-1.00"
> +- regs			: base address and size for decoupler module
> +
> +Optional properties:
> +- bridge-enable		: 0 if driver should disable bridge at startup
> +			  1 if driver should enable bridge at startup
> +			  Default is to leave bridge in current state.
> +
> +Example:
> +	fpga-bridge@...000450 {
> +		compatible = "xlnx,pr-decoupler-1.00";
> +		regs = <0x1000 0x10>;
> +		bridge-enable = <0>;
> +	};
> 

Look at.
https://github.com/Xilinx/linux-xlnx/blob/master/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt


And you miss above required clk property. I do use aclk because this is
what it is shown in vivado.

Thanks,
Michal