| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1489411604-18700-1-git-send-email-narmstrong@baylibre.com>
Date: Mon, 13 Mar 2017 14:26:39 +0100
From: Neil Armstrong <narmstrong@...libre.com>
To: mturquette@...libre.com, sboyd@...eaurora.org, carlo@...one.org,
khilman@...libre.com
Cc: Neil Armstrong <narmstrong@...libre.com>,
linux-clk@...r.kernel.org, linux-amlogic@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org
Subject: [PATCH 0/5] clk: meson: Fix GXBB and GXL/GXM GP0 PLL
This patchset fixes support for the Amlogic GXBB then GXL/GXM embedded GP0 PLL.
The current support is done via a very generic interface where only the
N/M/OD parameters are changed in the control registers.
But unlike the Fixed PLL, this PLL is not initialized by the bootloader or
firmware, and needs some parameters to initialize and lock correctly.
This patchset also adds the GXL variant compatible string which is already
supported by the GXL and GXM DT nodes.
Neil Armstrong (5):
clk: meson: Add support for parameters for specific PLLs
clk: meson-gxbb: Add GP0 PLL init parameters
clk: meson-gxbb: Add GXL/GXM GP0 Variant
clk: meson-gxbb: Expose GP0 dt-bindings clock id
dt-bindings: clock: gxbb-clkc: Add GXL compatible variant
.../bindings/clock/amlogic,gxbb-clkc.txt | 3 +-
drivers/clk/meson/clk-pll.c | 52 +++++++++++-
drivers/clk/meson/clkc.h | 23 +++++
drivers/clk/meson/gxbb.c | 97 +++++++++++++++++++++-
drivers/clk/meson/gxbb.h | 4 +-
include/dt-bindings/clock/gxbb-clkc.h | 1 +
6 files changed, 173 insertions(+), 7 deletions(-)
--
1.9.1
Powered by blists - more mailing lists