lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20170313142259.25397-15-kishon@ti.com>
Date:   Mon, 13 Mar 2017 19:52:50 +0530
From:   Kishon Vijay Abraham I <kishon@...com>
To:     Bjorn Helgaas <bhelgaas@...gle.com>,
        Joao Pinto <Joao.Pinto@...opsys.com>,
        <linux-pci@...r.kernel.org>, <linux-doc@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-omap@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>
CC:     <hch@...radead.org>, <nsekhar@...com>, <kishon@...com>
Subject: [PATCH v4 14/23] PCI: dwc: dra7xx: Workaround for errata id i870

According to errata i870, access to the PCIe slave port
that are not 32-bit aligned will result in incorrect mapping
to TLP Address and Byte enable fields.

Accessing non 32-bit aligned data causes incorrect data in the target
buffer if memcpy is used. Implement the workaround for this
errata here.

Signed-off-by: Kishon Vijay Abraham I <kishon@...com>
---
 drivers/pci/dwc/pci-dra7xx.c | 53 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)

diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c
index 35c18534469c..147d37a7fe58 100644
--- a/drivers/pci/dwc/pci-dra7xx.c
+++ b/drivers/pci/dwc/pci-dra7xx.c
@@ -26,6 +26,8 @@
 #include <linux/pm_runtime.h>
 #include <linux/resource.h>
 #include <linux/types.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
 
 #include "pcie-designware.h"
 
@@ -528,6 +530,51 @@ static const struct of_device_id of_dra7xx_pcie_match[] = {
 	{},
 };
 
+/*
+ * dra7xx_pcie_ep_unaligned_memaccess: workaround for AM572x/AM571x Errata i870
+ * @dra7xx: the dra7xx device where the workaround should be applied
+ *
+ * Access to the PCIe slave port that are not 32-bit aligned will result
+ * in incorrect mapping to TLP Address and Byte enable fields. Therefore,
+ * byte and half-word accesses are not possible to byte offset 0x1, 0x2, or
+ * 0x3.
+ *
+ * To avoid this issue set PCIE_SS1_AXI2OCP_LEGACY_MODE_ENABLE to 1.
+ */
+static int dra7xx_pcie_ep_unaligned_memaccess(struct device *dev)
+{
+	int ret;
+	struct device_node *np = dev->of_node;
+	struct regmap *regmap;
+	unsigned int reg;
+	unsigned int field;
+
+	regmap = syscon_regmap_lookup_by_phandle(np,
+						 "ti,syscon-unaligned-access");
+	if (IS_ERR(regmap)) {
+		dev_dbg(dev, "can't get ti,syscon-unaligned-access\n");
+		return -EINVAL;
+	}
+
+	if (of_property_read_u32_index(np, "ti,syscon-unaligned-access", 1,
+				       &reg)) {
+		dev_err(dev, "couldn't get legacy mode register offset\n");
+		return -EINVAL;
+	}
+
+	if (of_property_read_u32_index(np, "ti,syscon-unaligned-access", 2,
+				       &field)) {
+		dev_err(dev, "can't get bit field for setting legacy mode\n");
+		return -EINVAL;
+	}
+
+	ret = regmap_update_bits(regmap, reg, field, field);
+	if (ret)
+		dev_err(dev, "failed to enable unaligned access\n");
+
+	return ret;
+}
+
 static int __init dra7xx_pcie_probe(struct platform_device *pdev)
 {
 	u32 reg;
@@ -637,6 +684,7 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev)
 	case DW_PCIE_RC_TYPE:
 		dra7xx_pcie_writel(dra7xx, PCIECTRL_TI_CONF_DEVICE_TYPE,
 				   DEVICE_TYPE_RC);
+
 		ret = dra7xx_add_pcie_port(dra7xx, pdev);
 		if (ret < 0)
 			goto err_gpio;
@@ -644,6 +692,11 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev)
 	case DW_PCIE_EP_TYPE:
 		dra7xx_pcie_writel(dra7xx, PCIECTRL_TI_CONF_DEVICE_TYPE,
 				   DEVICE_TYPE_EP);
+
+		ret = dra7xx_pcie_ep_unaligned_memaccess(dev);
+		if (ret)
+			goto err_gpio;
+
 		ret = dra7xx_add_pcie_ep(dra7xx, pdev);
 		if (ret < 0)
 			goto err_gpio;
-- 
2.11.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ