[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <7ab4b440-f9d0-22fa-f463-f4c5542e21e7@baylibre.com>
Date: Tue, 14 Mar 2017 10:00:07 +0100
From: Neil Armstrong <narmstrong@...libre.com>
To: Sergei Shtylyov <sergei.shtylyov@...entembedded.com>,
Bartosz Golaszewski <bgolaszewski@...libre.com>,
Tejun Heo <tj@...nel.org>, Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Michael Turquette <mturquette@...libre.com>,
Kevin Hilman <khilman@...libre.com>,
Patrick Titiano <ptitiano@...libre.com>
Cc: linux-ide@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/2] ata: ahci: add support for DaVinci DM816 SATA
controller
On 03/14/2017 09:57 AM, Sergei Shtylyov wrote:
> Hello!
>
> On 3/13/2017 7:36 PM, Bartosz Golaszewski wrote:
>
>> This SATA controller is quite similar to the one present on the DA850
>> SoC, but the PHY configuration is different and it supports two HBA
>> ports.
>>
>> The IP suffers from the same PMP issue the DA850 does - if we enable
>> PMP but don't use it - softreset fails. Appropriate workaround was
>> implemented in this driver as well.
>>
>> Signed-off-by: Bartosz Golaszewski <bgolaszewski@...libre.com>
>> ---
>> drivers/ata/Kconfig | 9 +++
>> drivers/ata/Makefile | 1 +
>> drivers/ata/ahci_dm816.c | 200 +++++++++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 210 insertions(+)
>> create mode 100644 drivers/ata/ahci_dm816.c
>>
>> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
>> index 70b57d2..7f59a7a 100644
>> --- a/drivers/ata/Kconfig
>> +++ b/drivers/ata/Kconfig
>> @@ -118,6 +118,15 @@ config AHCI_DA850
>>
>> If unsure, say N.
>>
>> +config AHCI_DM816
>> + tristate "DaVinci DM816 AHCI SATA support"
>
> Is it really DaVinci?
>
>> + depends on ARCH_OMAP2PLUS
>
> Especially if it depends on OMAP...
Hi Sergei,
Yes it's a DaVinci family SoC, but shares a lot of IPs with the OMAP family.
Neil
>
> [...]
>
> MBR, Sergei
>
Powered by blists - more mailing lists